Opens in a new tab

MP1542DK-LF-Z

30V 2A boost converter, 1.3MHz, SOT-23-6

8966

Effective Inventory

Image for reference only

Manufacturer Part:

MP1542DK-LF-Z

Package:

SOT-23-6 (2.9×1.6mm)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MP1542DK-LF-Z from Monolithic Power is a 30V 2A boost converter with 1.3MHz switching, 2.5-24V input, and internal compensation in SOT-23-6.

Key Specifications

Package SOT-23-6 (2.9×1.6mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: MP1542DK-LF-Z Product Introduction

The MP1542DK-LF-Z from Monolithic Power is a 30V 2A boost converter with 1.3MHz switching, 2.5-24V input, and internal compensation in SOT-23-6.

Working Principle: MP1542DK-LF-Z Working Principle

The MP1542DK-LF-Z is a 30V 2A boost (step-up) converter from Monolithic Power in SOT-23-6, operating at 1.3MHz switching frequency with a 1.2A internal N-channel MOSFET. It uses current-mode control: an inner current loop regulates the peak inductor current cycle-by-cycle, while the outer voltage loop (FB pin compared against 1.25V reference) adjusts the current setpoint. Current-mode control provides faster transient response and inherent cycle-by-cycle current limiting compared to voltage-mode. The 1.3MHz frequency enables use of small 2.2uH-4.7uH inductors and ceramic output capacitors. The device supports output voltages up to 30V from inputs as low as 2.5V, making it suitable for OLED bias, LCD bias, and LED driver applications. The SHDN pin reduces supply current to 0.1uA when pulled LOW. Under-voltage lockout (UVLO) prevents operation below 2.0V. Soft-start is internally set to approximately 1ms to limit inrush current. The -LF-Z suffix indicates lead-free, tape-and-reel packaging.

Pin Description: MP1542DK-LF-Z Pin Definition and Functions
Pin Name Type Function
1 SW Output Switching node (internal MOSFET drain)
2 GND Power Ground
3 FB Input Feedback input (1.25V reference)
4 SHDN Input Shutdown control (active low, internal pull-up)
5 IN Power Input supply (2.5-30V)
6 SW Output Switching node (paralleled for current)
Application Scenarios: In which products and applications is MP1542DK-LF-Z used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for MP1542DK-LF-Z
    Manufacturer Part Number Package Notes
    Monolithic Power MP1542DK-LF SOT-23-6 Same device, tube package
    Texas Instruments LM2733YMF/NOPB SOT-23-5 1A boost, 1.6MHz, 3-20V
    Monolithic Power MP3204DK-LF-Z SOT-23-6 Boost, 20V, 0.5A, 1.4MHz
    Silan SY7208AAC SOT-23-6 Boost, 25V, 2A, similar spec
    Richtek RT9279GQW SOT-23-6 Boost, 25V, 2A, 1.2MHz

    Recommend Parts

    IRFS4310ZTRLPBF

    IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

    Brand: infineon

    Package: D2PAK (TO-263AB)

    IN STOCK: 11137pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MSASJ105BB5475MFNA01

    4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

    Brand: gigadevice

    Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

    IN STOCK: 9701pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRF3415PBF

    150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 2940pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    105017-1001

    USB Type-C receptacle connector, 24-pin, SMD

    Brand: Amphenol

    Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

    IN STOCK: 5335pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRLB3034PBF

    IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 9724pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    XC6SLX75-2FGG484I

    Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

    Brand: xilinx

    Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

    IN STOCK: 890pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1