Opens in a new tab

MP28164GD-Z

4.2A buck-boost, 1.2-5.5Vin, 1.5-5Vout, 2MHz, 25uA IQ, QFN-11

1391

Effective Inventory

Image for reference only

Manufacturer Part:

MP28164GD-Z

Package:

QFN-11 (2.0 x 3.0 x 0.6 mm with exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MP28164GD-Z is a Monolithic Power Systems (MPS) high-efficiency single-inductor buck-boost converter with integrated 4.2A switches. It operates from 1.2V to 5.5V input, provides 1.5V to 5V adjustable output, and delivers up to 2A at 3.3V output. The 2MHz fixed frequency and integrated MOSFETs minimize solution size. Packaged in QFN-11 (2×3 mm), -40C to +85C.

Key Specifications

Input Voltage 1.2 V to 5.5 V
Output Voltage 1.5 V to 5 V (adjustable)
Max Output Current 2 A at 3.3V (VIN 2.5-5.5V)
Switch Current 4.2 A (integrated)
Switching Freq 2 MHz
IQ 25 uA typical

Features

  • Single-inductor buck-boost topology
  • 4.2A integrated MOSFET switches
  • 1.2V to 5.5V input, 1.5V to 5V output
  • 2MHz fixed switching frequency
  • 25uA typical quiescent current
  • Up to 95% efficiency
  • Selectable PSM/PWM mode
  • Power-good output

Applications

  • Single-cell Li-ion battery systems
  • Portable and wearable devices
  • USB power delivery
  • Battery-powered IoT
Product Introduction: MP28164GD-Z Product Introduction

The MP28164GD-Z is a Monolithic Power Systems high-efficiency single-inductor buck-boost converter with integrated 4.2A switches. It seamlessly transitions between buck, boost, and buck-boost modes to maintain regulation when the input voltage is above, below, or near the output voltage. The 1.2V to 5.5V input range and 1.5V to 5V adjustable output make it ideal for single-cell Li-ion or multi-cell alkaline battery applications. At 2.5V to 5.5V input, it delivers up to 2A at 3.3V output. The 2MHz fixed switching frequency allows tiny inductors and capacitors. The 25uA quiescent current and selectable PFM skip mode extend battery life at light loads. Internal soft-start, compensation, power-good output, hiccup short-circuit protection, and over-temperature protection are included. Packaged in QFN-11 (2×3 mm).

Working Principle: MP28164GD-Z Working Principle

The MP28164 uses a single-inductor 4-switch buck-boost topology with four integrated MOSFETs (SWA/SWB for buck, SWC/SWD for boost). A fixed-frequency current-mode PWM controller determines the operating mode based on VIN vs VOUT. When VIN > VOUT, it operates in buck mode (SWA/SWB switch, SWD on, SWC off). When VIN < VOUT, it operates in boost mode (SWC/SWD switch, SWA on, SWB off). When VIN is near VOUT, it enters buck-boost mode where all four switches operate. The seamless transition between modes prevents output voltage glitches. At light loads, PFM skip mode reduces switching frequency to maintain high efficiency, while PWM mode provides lowest output ripple at heavy loads.

Pin Description: MP28164GD-Z Pin Definition and Functions

QFN-11 with key pins: VIN (input supply), SW (switch node to inductor), VOUT (output), FB (feedback for output voltage setting), EN (enable), PG (power-good), MODE (PSM/PWM mode select), SLEEP (sleep control), GND (ground), and exposed thermal pad. Refer to datasheet for complete 11-pin QFN mapping.

Application Scenarios: In which products and applications is MP28164GD-Z used
  • Single-cell Li-ion to 3.3V power with seamless buck-boost across full battery range
  • Portable and wearable devices requiring 2A from variable battery voltage
  • USB power delivery from 5V bus to 3.3V-5V system rail
  • Battery-powered IoT sensors with 25uA IQ and PFM skip mode
Alternative Models: What chips are recommended as replacements for MP28164GD-Z
Model Manufacturer Key Difference
MP28163 MPS Lower switch current version
TPS63020 TI Similar buck-boost, 2A
LTC3533 ADI Similar buck-boost, 2A
BQ25505 TI Nano-power boost charger

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1