Opens in a new tab

MP8049SDU-LF-Z

Quad half-bridge driver, 26V, 5.5A, QFN-40, MPS

7071

Effective Inventory

Image for reference only

Manufacturer Part:

MP8049SDU-LF-Z

Package:

QFN-40 (5 x 5 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MP8049SDU-LF-Z from Monolithic Power Systems is a quad power half-bridge driver IC capable of delivering up to 5.5 A per channel from a 5-26 V supply. Configurable as dual full-bridge or quad half-bridge, it serves as the output stage for Class-D audio amplifiers and motor drives with integrated overcurrent, overtemperature, and undervoltage protection.

Key Specifications

Supply Voltage 5 – 26 V
Output Current 5.5 A (peak per channel)
Configuration Dual full-bridge or quad half-bridge
On-Resistance 0.14 Ohm (high-side + low-side)
BTL Output Power 37W/ch @ 24V, 8 Ohm
Switching Frequency Up to 1 MHz
Dead Time 10 ns
Protection OCP, OTP, UVP, Short Circuit
Package QFN-40 (5 x 5 mm)
Operating Temperature -40 to +125 deg C (TJ)

Features

  • Quad half-bridge or dual full-bridge configuration
  • 5.5 A peak output current per channel
  • Ultra-low RDS(on): 0.14 Ohm total bridge
  • Integrated overcurrent, thermal, and undervoltage protection
  • Up to 1 MHz switching frequency
  • 37W per channel BTL output at 24V/8 Ohm
  • Fault output with diagnostic flags (FLT2B, FLT3B)

Applications

  • Class-D audio amplifier output stage
  • Flat-panel TV and home theater audio
  • Brushed DC motor dual H-bridge drive
  • D-class amplifier for DVD receivers
  • Solenoid and relay driver arrays
Product Introduction: MP8049SDU-LF-Z Product Introduction

The MP8049SDU-LF-Z from Monolithic Power Systems is a quad power half-bridge driver IC in a 5 x 5 mm QFN-40 package. Operating from 5-26 V with 5.5 A peak output current and 0.14 Ohm total on-resistance, it delivers up to 37W per channel into 8 Ohm loads in BTL configuration. The device integrates all four power half-bridges with bootstrap drivers, and features comprehensive protection including cycle-by-cycle overcurrent limit (5.5A), overtemperature shutdown (160 deg C), undervoltage lockout, and short-circuit detection. Configurable as dual full-bridge or quad half-bridge, it serves Class-D audio amplifiers and motor drive applications.

Working Principle: MP8049SDU-LF-Z Working Principle

The MP8049 integrates four N-channel MOSFET half-bridges with gate drive and protection logic on a single die. Each half-bridge consists of a high-side NMOS switch and a low-side NMOS switch. The bootstrap circuit (external capacitor on BST pins) provides gate drive voltage above the supply rail for the high-side NMOS. A 10 ns dead time between high-side and low-side conduction prevents shoot-through current. The overcurrent protection monitors each MOSFET’s current and shuts down the corresponding bridge channel for approximately 30 us when the 5.5A threshold is exceeded. The thermal protection disables all outputs when the junction temperature exceeds 160 deg C, automatically recovering when it drops below 125 deg C.

Pin Description: MP8049SDU-LF-Z Pin Definition and Functions
Pin Name Type Function
1 BST1 Power Bootstrap cap for bridge 1
5 SHDNB Input Shutdown (active low)
9 STBYB Input Standby (active low, refreshes bootstrap)
15 FAULTB Output Fault output (open-drain, active low)
20 IN1 Input Logic input for half-bridge 1
21 IN2 Input Logic input for half-bridge 2
30 VDD Power Supply voltage 5-26V
40 BST2 Power Bootstrap cap for bridge 2
Application Scenarios: In which products and applications is MP8049SDU-LF-Z used
  • Class-D audio amplifier output stage
  • Flat-panel TV and home theater audio
  • Brushed DC motor dual H-bridge drive
  • D-class amplifier for DVD receivers
  • Solenoid and relay driver arrays
Alternative Models: What chips are recommended as replacements for MP8049SDU-LF-Z
Manufacturer Part Number Package Notes
MPS MP7720 TSSOP-28 Dual full-bridge, 20W, audio class-D
TI TAS5707 HTQFP-48 Digital input class-D audio amp
Infineon MA5332MS VQFN-48 2x65W class-D audio driver
MPS MP8047 QFN-40 Similar spec, different channel count

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1