Opens in a new tab

MPL115A2

Digital barometer, 50-115kPa, I2C, 12-bit, 5µA, LGA-8

4320

Effective Inventory

Image for reference only

Manufacturer Part:

MPL115A2

Package:

LGA-8 (3 x 5 x 1.2 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPL115A2 is a miniature digital barometer from NXP Semiconductors with I2C interface, 50-115 kPa pressure range, 12-bit resolution, and integrated temperature compensation in a 3 x 5 x 1.2 mm LGA package.

Key Specifications

Pressure Range 50 kPa to 115 kPa (500-1150 hPa)
Resolution 12-bit (0.015 kPa / 0.15 hPa)
Accuracy ±1 kPa (10 hPa) over 50-115 kPa
Interface I2C (up to 400 kHz)
Supply Voltage 2.375 V to 5.5 V
Supply Current (Active) 5 µA typical (1 sample/s)
Supply Current (Shutdown) 1 µA max
Conversion Time 1 ms typical (pressure + temperature)
Operating Temperature -40°C to +105°C
Package LGA-8 (3 x 5 x 1.2 mm)

Features

  • Integrated MEMS pressure sensor and ASIC
  • 12-bit ADC resolution for pressure
  • On-chip temperature compensation via coefficients
  • Low power: 5 µA at 1 sample/second
  • Simple I2C interface with auto-increment
  • Factory-calibrated coefficients stored in on-chip EEPROM
  • Shutdown mode for battery-powered applications
  • RoHS compliant, halogen-free package

Applications

  • Weather stations and forecasting
  • Altitude and elevation measurement
  • Indoor navigation
  • Smartphones and tablets
  • HVAC systems
Product Introduction: MPL115A2 Product Introduction

The MPL115A2 is a miniature digital barometer from NXP Semiconductors that integrates a MEMS pressure sensor with a signal conditioning ASIC in a compact 3x5x1.2mm LGA package. It measures absolute pressure from 50 to 115 kPa with 12-bit resolution (0.015 kPa steps) and ±1 kPa accuracy. The device includes an integrated temperature sensor and factory-calibrated compensation coefficients stored in on-chip EEPROM. Communication is via a standard I2C interface at up to 400 kHz. The host reads raw pressure and temperature data along with calibration coefficients and performs the compensation calculation using the provided formula. At just 5 µA active current (1 sample/second) and 1 µA in shutdown, the MPL115A2 is ideal for battery-powered weather stations and altimeters.

Working Principle: MPL115A2 Working Principle

The MPL115A2 uses a piezoresistive MEMS pressure sensor element fabricated on a silicon die. The sensor consists of a thin silicon diaphragm with implanted piezoresistors forming a Wheatstone bridge. Atmospheric pressure deflects the diaphragm, changing the resistance of the piezoresistive elements and producing a differential voltage output proportional to pressure. The ASIC digitizes both the pressure bridge output and the on-chip temperature sensor using a 12-bit ADC. Temperature compensation is essential because piezoresistive elements have significant temperature coefficients. The factory stores unique calibration coefficients (a0, b1, b2, c12) in on-chip EEPROM. The host microcontroller reads the raw pressure and temperature ADC values along with these coefficients and applies the polynomial compensation formula: Pcomp = a0 + (b1 + c12 times Tadc) times Padc + b2 times Tadc, then scales to kPa. This approach achieves ±1 kPa accuracy over the full temperature range.

Pin Description: MPL115A2 Pin Definition and Functions
Pin Name Type Description
1 SDA I/O I2C serial data (open-drain)
2 GND Power Ground
3 VDD Power Supply voltage (2.375-5.5V)
4 SCL Input I2C serial clock
5 NC – No connect
6 NC – No connect
7 SHDN Input Shutdown (active high, connect to GND for normal)
8 RST Input Reset (active low, internal pull-up)
Application Scenarios: In which products and applications is MPL115A2 used
  • Weather Stations: 50-115 kPa range and ±1 kPa accuracy for barometric pressure measurement and weather forecasting
  • Altitude Measurement: 12-bit resolution enables approximately 1.2m altitude resolution using the barometric formula
  • Indoor Navigation: Pressure-based floor detection in multi-story buildings where GPS is unavailable
  • Smartphones/Tablets: Compact LGA package and 5 µA current enable integration into mobile devices
  • HVAC Systems: Barometric pressure compensation for airflow calculations in building automation
Alternative Models: What chips are recommended as replacements for MPL115A2
Model Manufacturer Key Difference Package Specs
MPL3115A2 NXP 20-110 kPa, 20-bit, SPI/I2C, altitude mode – –
BMP280 Bosch 300-1100 hPa, I2C/SPI, smaller package – –
DPS310 Infineon 300-1200 hPa, SPI/I2C, ±0.5 hPa accuracy – –
LPS22HB ST 260-1260 hPa, I2C/SPI, embedded FIFO – –
BME280 Bosch Pressure + humidity + temperature, I2C/SPI – –

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1