Opens in a new tab

Home » Integrated Circuits ICs, LED Driver ICs » MPQ2483ADS-AEC1-LF-Z

MPQ2483ADS-AEC1-LF-Z

AEC-Q100 55V 2.5A LED driver, buck/buck-boost, analog+PWM dimming, 0.28Ω FET, QFN-10

6608

Effective Inventory

Image for reference only

Manufacturer Part:

MPQ2483ADS-AEC1-LF-Z

Package:

QFN-10 (3mm x 3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPQ2483ADS-AEC1-LF-Z is a Monolithic Power Systems (MPS) AEC-Q100 qualified 55V, 2.5A LED driver suitable for buck or buck-boost topologies. It features both analog and PWM dimming on a single control pin, a 0.28Ω internal power MOSFET switch, and comprehensive protection including open-string, short-circuit, and thermal shutdown.

Key Specifications

Input Voltage Range 4.5V to 55V
LED Current 2.5A peak
Internal MOSFET RDS(ON) 0.28Ω
Reference Voltage 0.198V
Dimming Analog + PWM (single EN/DIM pin)
Shutdown Current 5μA
Operating Temperature -40°C to +125°C
Qualification AEC-Q100

Features

  • AEC-Q100 qualified for automotive LED applications
  • Buck or buck-boost topology support
  • Wide 4.5V to 55V input range
  • Integrated 0.28Ω power MOSFET switch
  • Combined analog and PWM dimming on single pin
  • Separate input reference ground for positive-to-negative conversion
  • Low 0.198V reference voltage for high efficiency
  • Cycle-by-cycle over-current protection
  • Output over-voltage, open-string, and short-circuit protection
  • 5μA shutdown current

Applications

  • Automotive LED headlight drivers
  • Daytime running lights (DRL)
  • Fog light LED drivers
  • Automotive interior LED lighting
  • Industrial LED illumination
Product Introduction: MPQ2483ADS-AEC1-LF-Z Product Introduction

The MPQ2483ADS-AEC1-LF-Z is an MPS AEC-Q100 qualified 55V, 2.5A LED driver supporting both buck and buck-boost topologies. It integrates a 0.28Ω power MOSFET switch and features combined analog and PWM dimming on a single EN/DIM pin. The separate input reference ground enables direct control for positive-to-negative power conversion in buck-boost configurations. With 0.198V low reference voltage, 5μA shutdown current, and comprehensive protection (OCP, OVP, SCP, open-string, thermal shutdown), it is ideal for automotive headlight, DRL, and fog light LED applications.

Working Principle: MPQ2483ADS-AEC1-LF-Z Working Principle

The MPQ2483ADS-AEC1-LF-Z operates as a current-mode LED driver. The error amplifier compares the LED current sense voltage (across an external sense resistor) against the 0.198V internal reference. The error amplifier output controls the peak inductor current through the PWM comparator and RS flip-flop, which drives the internal 0.28Ω MOSFET switch. The external Schottky diode conducts the inductor current during the off-time. The EN/DIM pin serves dual purpose: a DC voltage above the enable threshold turns on the device, and voltage variations around the threshold provide analog dimming. A PWM signal on the same pin chops the LED current on and off for PWM dimming. In buck-boost mode, the separate input reference ground (VSS) allows the LED cathode to be connected below ground, enabling positive-to-negative conversion. OVP monitors the output voltage through a resistor divider, and open-string protection activates when the OVP threshold is reached.

Pin Description: MPQ2483ADS-AEC1-LF-Z Pin Definition and Functions
Pin Mnemonic Description
1 SW Switch node (internal MOSFET drain)
2 GND Ground (signal reference)
3 VSS Input reference ground for buck-boost
4 EN/DIM Enable and dimming control pin
5 FB Current sense feedback input
6 COMP Error amplifier compensation
7 OVP Output over-voltage protection pin
8 VDD Internal LDO output / bias
9 BST Bootstrap capacitor
10 INGND Input ground (power reference)
Application Scenarios: In which products and applications is MPQ2483ADS-AEC1-LF-Z used
  • Automotive LED headlight driver in buck-boost mode from 9-16V battery
  • DRL and position light with PWM dimming from body controller
  • Fog light LED constant current driver with OVP and open-string protection
  • Automotive interior ambient LED lighting with analog brightness control
  • Industrial 12V/24V LED illumination with 55V input tolerance
Alternative Models: What chips are recommended as replacements for MPQ2483ADS-AEC1-LF-Z
Model Manufacturer Key Difference
MPQ24833-B MPS 3A, 60V, non-automotive version
AL8860SP-13 Diodes Inc 60V, 1A buck LED driver
LT3956 ADI 80V, 3.3A LED driver
TPS92515 TI 45V, 2A buck LED driver
MPQ28163GD-AEC1 MPS Buck-boost, 1.5A, automotive

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1