Opens in a new tab

MPQ4420AGJ-AEC1

55V, 2A sync buck converter, integrated MOSFETs, 200kHz-2MHz, QFN-10, AEC-Q100

4217

Effective Inventory

Image for reference only

Manufacturer Part:

MPQ4420AGJ-AEC1

Package:

QFN-10 (3 x 3 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPS MPQ4420AGJ-AEC1 is a 55 V, 2 A, synchronous buck converter with integrated 140 mΩ high-side and 90 mΩ low-side MOSFETs. Operating from 4 V to 55 V input, it delivers adjustable output from 0.8 V to 90% of VIN at up to 2 A. AEC-Q100 qualified and housed in a QFN-10 (3 x 3 mm) package, it is designed for automotive and industrial power supply applications.

Key Specifications

Input Voltage Range 4 V to 55 V
Output Voltage Range 0.8 V to 0.9 × VIN
Output Current 2 A
HS RDS(on) 140 mΩ
LS RDS(on) 90 mΩ
Switching Frequency 200 kHz to 2 MHz (programmable)
Quiescent Current 12 µA (typ, PFM mode)
Operating Temperature -40 °C to +150 °C
Package QFN-10 (3 x 3 mm)

Features

  • AEC-Q100 qualified for automotive applications
  • 4 V to 55 V wide input voltage range
  • Integrated 140 mΩ HS / 90 mΩ LS MOSFETs
  • Programmable switching frequency: 200 kHz to 2 MHz
  • PFM mode for high efficiency at light load
  • External compensation for design flexibility
  • Power-good indicator and enable control
  • Comprehensive protection: OCP, SCP, UVLO, OTP

Applications

  • Automotive 12V/24V/48V system power supply
  • Industrial distributed power architectures
  • FPGA and DSP point-of-load regulation
  • Automotive infotainment and ADAS power
Product Introduction: MPQ4420AGJ-AEC1 Product Introduction

The MPS MPQ4420AGJ-AEC1 is a 55 V, 2 A synchronous step-down converter with integrated power MOSFETs, designed for automotive and industrial power supply applications. The wide 4 V to 55 V input range accommodates 12 V, 24 V, and 48 V automotive bus systems with margin for load dump transients. The integrated 140 mΩ high-side and 90 mΩ low-side MOSFETs eliminate external switches, reducing component count and solution footprint. The programmable switching frequency (200 kHz to 2 MHz) allows designers to trade off efficiency vs. inductor size. PFM (pulse-frequency modulation) mode reduces quiescent current to 12 µA at light load, improving battery life in always-on automotive ECUs. External compensation provides flexibility to optimize transient response for different output filter configurations. The QFN-10 (3 x 3 mm) package offers a compact footprint with exposed thermal pad for efficient heat dissipation.

Working Principle: MPQ4420AGJ-AEC1 Working Principle

The MPQ4420AGJ-AEC1 uses a current-mode control architecture for the synchronous buck converter. The high-side MOSFET (140 mΩ) connects the input voltage to the inductor during the on-time, while the low-side MOSFET (90 mΩ) provides a recirculation path during the off-time, replacing the conventional Schottky diode for higher efficiency. Current-mode control senses the inductor current through the high-side MOSFET RDS(on) (lossless sensing), providing cycle-by-cycle current limiting and improved loop stability compared to voltage-mode control. The error amplifier compares the output voltage (via an external resistor divider) with the 0.8 V internal reference and adjusts the duty cycle accordingly. External compensation (a Type-II RC network on the COMP pin) sets the crossover frequency and phase margin. At light loads, PFM mode skips pulses to maintain regulation with minimal switching losses, reducing the effective switching frequency and quiescent current to 12 µA. Protection features include cycle-by-cycle overcurrent protection (OCP), short-circuit protection (SCP), undervoltage lockout (UVLO), and over-temperature shutdown (OTP).

Pin Description: MPQ4420AGJ-AEC1 Pin Definition and Functions
Pin Name Type Function
1 BST Power Bootstrap capacitor for HS gate drive
2 VIN Input Input supply voltage (4-55V)
3 SW Output Switching node (inductor connection)
4 PGND Ground Power ground
5 AGND Ground Analog ground
6 FB Input Output voltage feedback (0.8V reference)
7 COMP I/O Error amplifier output (compensation)
8 EN Input Enable (high=on, internal pull-up)
9 FREQ Input Frequency setting resistor or sync input
10 PG Output Power-good indicator (open-drain)
Application Scenarios: In which products and applications is MPQ4420AGJ-AEC1 used
  • Automotive 12V/24V to 5V/3.3V ECU power supply
  • 48V mild-hybrid to point-of-load conversion
  • Industrial distributed power bus DC-DC conversion
  • ADAS and infotainment system core voltage regulation
Alternative Models: What chips are recommended as replacements for MPQ4420AGJ-AEC1
Manufacturer Part Number Package Notes
TI LM5164PDDAR SOT-563-8 65V, 0.5A buck, similar input range
Analog Devices LT8631IUD#PBF QFN-20 100V, 2A, higher voltage
MPS MPQ4462GU-AEC1 QFN-12 55V, 3.5A, higher current version
Richtek RT6207GQW WDFN-10 60V, 2A synchronous buck

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1