Opens in a new tab

MPQ4572GRE-AEC1

60V, 2A AEC-Q100 synchronous step-down converter with AAM mode, 2μA shutdown IQ, SOIC-8 EP

6320

Effective Inventory

Image for reference only

Manufacturer Part:

MPQ4572GRE-AEC1

Package:

SOIC-8 EP (5.0 x 4.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPQ4572GRE-AEC1 is a Monolithic Power Systems (MPS) AEC-Q100 qualified 60V, 2A fully integrated synchronous step-down converter. It operates in peak current control mode with wide input range from 4.5V to 60V, making it suitable for automotive environments. The device integrates both high-side and low-side power MOSFETs and features Advanced Asynchronous Modulation (AAM) mode for high efficiency at light loads. Packaged in SOIC-8 EP.

Key Specifications

Input Voltage Range 4.5V to 60V
Output Current 2A
Switching Frequency 400kHz (typical)
Shutdown Quiescent Current 2μA
Control Mode Peak Current Mode
AAM Mode Advanced Asynchronous Modulation for light-load efficiency
Operating Temperature -40°C to +150°C
Qualification AEC-Q100

Features

  • AEC-Q100 Grade 0 qualified for automotive applications
  • Wide 4.5V to 60V input range for automotive cold-crank
  • Integrated high-side and low-side MOSFETs
  • Advanced Asynchronous Modulation (AAM) for light-load efficiency
  • Internal soft-start and enable control
  • Power good indicator output
  • High duty cycle and low dropout mode for cold-crank
  • Valley current limit OCP with hiccup short-circuit protection
  • Input UVLO and auto-recovery thermal protection

Applications

  • Automotive infotainment systems
  • Car battery-powered electronics
  • ADAS and driver assistance modules
  • Industrial 24V/48V distributed power
  • Battery-powered applications
Product Introduction: MPQ4572GRE-AEC1 Product Introduction

The MPQ4572GRE-AEC1 is an AEC-Q100 Grade 0 qualified fully integrated synchronous buck converter from Monolithic Power Systems. With a wide 4.5V to 60V input range, it is designed for automotive applications requiring operation through cold-crank and load-dump conditions. The device delivers up to 2A continuous output current with peak current mode control, features AAM mode for excellent light-load efficiency, and achieves 2μA shutdown quiescent current for battery-powered systems. Comprehensive protection includes valley OCP, hiccup SCP, UVLO, and auto-recovery OTP.

Working Principle: MPQ4572GRE-AEC1 Working Principle

The MPQ4572GRE-AEC1 operates as a peak current mode synchronous buck converter. The high-side MOSFET is controlled by a peak current comparator that compares the sensed inductor current against an error amplifier output. The internal slope compensation ensures stability at duty cycles above 50%. In AAM mode, the device reduces switching frequency at light loads to minimize switching and gate drive losses, maintaining high efficiency. The low-side MOSFET replaces the external Schottky diode for synchronous rectification. The built-in high duty cycle and low dropout mode allows operation through automotive cold-crank when the battery voltage drops significantly. The valley current limit monitors the low-side MOSFET current to provide cycle-by-cycle overcurrent protection.

Pin Description: MPQ4572GRE-AEC1 Pin Definition and Functions
Pin Mnemonic Description
1 BST Bootstrap capacitor pin
2 VIN Input supply voltage (4.5-60V)
3 EN Enable input (active high)
4 FB Feedback voltage input
5 COMP Loop compensation pin
6 PG Power good output
7 GND Signal ground
8 SW Switch node output
EP PGND Exposed pad (power ground)
Application Scenarios: In which products and applications is MPQ4572GRE-AEC1 used
  • Automotive infotainment 12V/24V to 5V/3.3V power supply with cold-crank support
  • ADAS camera and radar module power requiring AEC-Q100 qualification
  • Industrial 24V/48V bus to low-voltage conversion with 60V input rating
  • Battery-powered IoT gateways requiring 2μA shutdown current
  • Automotive lighting controller power supply with thermal protection
Alternative Models: What chips are recommended as replacements for MPQ4572GRE-AEC1
Model Manufacturer Key Difference
MPQ4572GJ-AEC1 MPS Same function, TSOT-23-8 package
LM5160 TI 65V, 1.5A, PSR flyback/buck
LMR36015 TI 60V, 1.5A buck converter
MAX20073 ADI 36V, 3A AEC-Q100 buck
TLE8386-2EL Infineon 60V buck controller (external MOSFET)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1