Opens in a new tab

MPQ8632GLE-8-Z

18V 8A synchronous buck, COT, 200kHz-1MHz prog., scalable family, QFN-16 (3x4mm)

7000

Effective Inventory

Image for reference only

Manufacturer Part:

MPQ8632GLE-8-Z

Package:

QFN-16 (3mm x 4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPQ8632GLE-8-Z is a Monolithic Power Systems (MPS) 18V, 8A fully integrated synchronous step-down converter using constant-on-time (COT) control for ultrafast transient response. Part of the scalable MPQ8632 family (4A to 20A), it shares the same QFN-16 (3x4mm) footprint as the 4A/6A/10A/12A variants, enabling easy current scaling without PCB redesign.

Key Specifications

Input Voltage Range 4.5V to 18V (internal bias); 2.5V to 18V (external 5V bias)
Output Current 8A
Output Voltage Range 0.611V to 13V
Reference Voltage Accuracy 0.5% (0°C to +70°C)
Switching Frequency 200kHz to 1MHz (programmable via R_FREQ)
Control Mode Adaptive Constant-On-Time (COT)
Operating Temperature -40°C to +125°C

Features

  • Scalable family: 4A/6A/8A/10A/12A share same QFN-16 footprint
  • Low input voltage operation from 2.5V with external 5V bias
  • Programmable switching frequency: 200kHz to 1MHz via external resistor
  • Feed-forward compensation for nearly constant frequency vs. VIN
  • 0.5% reference voltage accuracy (0°C to +70°C)
  • Programmable soft-start time
  • Pre-bias start-up support
  • Non-latch OCP, OVP, and thermal shutdown protection
  • Open-drain power good output

Applications

  • Server and storage POL power supplies
  • Networking equipment distributed power
  • FPGA, DSP, and ASIC core voltage rails
  • Base station and telecom power
  • High-end consumer electronics
Product Introduction: MPQ8632GLE-8-Z Product Introduction

The MPQ8632GLE-8-Z is an MPS 18V, 8A fully integrated synchronous step-down converter using adaptive COT control for ultrafast transient response. Part of the scalable MPQ8632 family, the 4A/6A/8A/10A/12A variants share the same QFN-16 (3x4mm) footprint, enabling current scaling without PCB redesign. The switching frequency is programmable from 200kHz to 1MHz via an external resistor, with feed-forward compensation for nearly constant frequency across the input range. Features include 0.5% reference accuracy, programmable soft-start, pre-bias start-up, and comprehensive protection.

Working Principle: MPQ8632GLE-8-Z Working Principle

The MPQ8632GLE-8-Z uses adaptive constant-on-time (COT) control where the high-side MOSFET turns on for a calculated duration when the FB voltage drops below the reference. The on-time is programmed by the R_FREQ resistor and adaptively adjusted based on VIN and VOUT to maintain approximately constant switching frequency. The feed-forward from VIN through the R_FREQ resistor compensates for input voltage variations. The integrated low-side MOSFET provides synchronous rectification for high efficiency. The internal 4.8V LDO powers the driver and control circuits, or external 5V bias can override it for low VIN operation down to 2.5V. Non-latch OCP monitors valley current, OVP protects against output overvoltage, and thermal shutdown activates at approximately 160°C.

Pin Description: MPQ8632GLE-8-Z Pin Definition and Functions
Pin Mnemonic Description
1 EN Enable input (active high)
2 FREQ Frequency set resistor to VIN
3 FB Feedback voltage input
4 SS Soft-start capacitor pin
5 AGND Analog ground
6 PG Power good (open drain)
7 VCC Internal 4.8V LDO output / external bias
8 BST Bootstrap capacitor pin
9-14 PGND Power ground (6 pins)
15-16 SW Switch node output
Application Scenarios: In which products and applications is MPQ8632GLE-8-Z used
  • Server VRM 12V to 1.0V/1.2V core rail at 8A with scalable family for 4A-12A
  • Networking equipment POL with 200kHz-1MHz programmable frequency
  • FPGA/DSP core power requiring ultrafast transient response from 5V/12V
  • Base station DSP voltage rail with power good monitoring
  • High-end TV SoC power with pre-bias start-up capability
Alternative Models: What chips are recommended as replacements for MPQ8632GLE-8-Z
Model Manufacturer Key Difference
MPQ8632GLE-12-Z MPS 12A version, same footprint
MPQ8633BGLE-Z MPS 20A, QFN-21, different footprint
TPS54560B TI 5A, 60V, lower current
ISL6505 Renesas 20A POL, different package
LTM4650 ADI 25A uModule with inductor

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1