Opens in a new tab

MPZ1608D101BTA00

Ferrite bead EMI suppressor, 100 Ohm @ 100MHz, 1608 (0603), 2A

14135

Effective Inventory

Image for reference only

Manufacturer Part:

MPZ1608D101BTA00

Package:

1608 (0603)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPZ1608D101BTA00 from TDK is a ferrite bead EMI suppressor with 100 Ohm impedance at 100MHz, rated for 2A in a compact 1608 (0603) package for noise filtering on power and signal lines.

Key Specifications

Package 1608 (0603)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: MPZ1608D101BTA00 Product Introduction

The MPZ1608D101BTA00 from TDK is a ferrite bead EMI suppressor with 100 Ohm impedance at 100MHz, rated for 2A in a compact 1608 (0603) package for noise filtering on power and signal lines.

Working Principle: MPZ1608D101BTA00 Working Principle

The MPZ1608D101BTA00 is a multilayer ferrite bead EMI suppressor from TDK in 1608 (0603 metric) package, rated at 100 Ohm impedance at 100MHz with 2A rated current. Ferrite beads suppress high-frequency noise by converting it to heat through magnetic hysteresis losses in the ferrite material. At DC and low frequencies (below 10MHz), the bead presents low impedance (typically 0.1 ohm or less), allowing signal and power currents to pass with minimal voltage drop. At high frequencies (100MHz and above), the impedance rises to the rated value (100 ohm), attenuating EMI noise by reflecting it back to the source and absorbing it as heat. The impedance-frequency characteristic follows: Z = R + jX, where the resistive component (R) dominates above the resonant frequency, converting noise energy to heat rather than reflecting it (which could cause resonance). The ‘D’ suffix indicates the impedance tolerance grade (approximately +/-25%). The rated current (2A) is defined as the DC current at which the impedance drops by 50% from its initial value due to magnetic saturation of the ferrite. The 1608 package size (1.6 x 0.8mm) is the most common footprint for ferrite beads, compatible with standard surface-mount assembly. The device is used for: (1) Power line filtering (placing a bead in series with VCC pins of ICs to suppress switching noise); (2) Signal line EMI suppression (USB, HDMI, Ethernet data lines); (3) Preventing high-frequency noise from propagating between circuit sections. The BTA00 suffix specifies tape-and-reel packaging (4000 pcs/reel).

Pin Description: MPZ1608D101BTA00 Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Passive Solder terminal (connect to signal line for EMI suppression)
2 Terminal 2 Passive Solder terminal (connect to ground or return path)
Application Scenarios: In which products and applications is MPZ1608D101BTA00 used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for MPZ1608D101BTA00
    Manufacturer Part Number Package Notes
    TDK MMZ1608D101C 0603 100 Ohm @ 100MHz, 2A, TDK brand
    Murata BLM18AG101SN1D 0603 100 Ohm @ 100MHz, 2A, Murata brand
    TDK MPZ1608D101BTA00 0603 Same device, TDK brand
    Wurth 742792011 0603 100 Ohm @ 100MHz, 2A, Wurth brand
    Yageo FB1608-101-B100L 0603 100 Ohm @ 100MHz, Yageo brand

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1