Opens in a new tab

MPZ1608S101ATAH0

Ferrite bead, 100 Ohm @ 100MHz, 1608, 1A, automotive AEC-Q200

12647

Effective Inventory

Image for reference only

Manufacturer Part:

MPZ1608S101ATAH0

Package:

1608 (0603)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MPZ1608S101ATAH0 from TDK is an AEC-Q200 automotive-grade ferrite bead with 100 Ohm impedance at 100MHz, rated for 1A in a 1608 package for automotive EMI suppression.

Key Specifications

Package 1608 (0603)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: MPZ1608S101ATAH0 Product Introduction

The MPZ1608S101ATAH0 from TDK is an AEC-Q200 automotive-grade ferrite bead with 100 Ohm impedance at 100MHz, rated for 1A in a 1608 package for automotive EMI suppression.

Working Principle: MPZ1608S101ATAH0 Working Principle

The MPZ1608S101ATAH0 is a multilayer ferrite bead EMI suppressor from TDK in 1608 (0603 metric) package, rated at 100 Ohm impedance at 100MHz with 1A rated current, AEC-Q200 qualified for automotive applications. The S-series differs from the D-series (MPZ1608D101BTA00) in having a lower rated current (1A vs 2A) but higher impedance at 100MHz (100 Ohm typical vs 100 Ohm), with the S-series optimized for signal line applications where lower current handling is acceptable but EMI suppression is critical. The AEC-Q200 qualification ensures the device passes automotive-grade reliability tests: high-temperature storage (150C/1000h), temperature cycling (-55C to +125C/1000 cycles), bias humidity (85C/85%RH/1000h), and mechanical shock/vibration. The ferrite bead suppresses high-frequency noise by converting it to heat through magnetic hysteresis losses. At DC and low frequencies, the bead presents low impedance (less than 0.1 ohm), allowing signal currents to pass freely. At high frequencies (100MHz and above), the impedance rises to the rated 100 Ohm, attenuating EMI noise. The impedance-frequency characteristic follows: Z = R + jX, where the resistive component (R) dominates above the resonant frequency, converting noise energy to heat. The -ATAH0 suffix specifies tape-and-reel, AEC-Q200, automotive grade. Applications include: automotive CAN/LIN bus EMI filtering, infotainment signal line protection, and ADAS sensor interface filtering.

Pin Description: MPZ1608S101ATAH0 Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Passive Solder terminal (connect to signal line for EMI suppression)
2 Terminal 2 Passive Solder terminal (connect to ground or return path)
Application Scenarios: In which products and applications is MPZ1608S101ATAH0 used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for MPZ1608S101ATAH0
    Manufacturer Part Number Package Notes
    TDK MPZ1608S101ATAH0 0603 Same device, TDK brand, AEC-Q200
    TDK MMZ1608S101ATAH0 0603 AEC-Q200, 100 Ohm @ 100MHz, TDK alternative
    Murata BLM18AG101SN1D 0603 100 Ohm @ 100MHz, Murata brand
    Wurth 742792095 0603 100 Ohm @ 100MHz, Wurth brand, AEC-Q200
    Yageo FB1608-101-B100L 0603 100 Ohm @ 100MHz, Yageo brand

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1