Opens in a new tab

Home » Integrated Circuits ICs, Sensors » MS560702BA03-50

MS560702BA03-50

24-bit barometric pressure sensor, 10-1200mbar, I2C/SPI, QFN-8, 20cm altitude resolution

12476

Effective Inventory

Image for reference only

Manufacturer Part:

MS560702BA03-50

Package:

QFN-8 (5.0 x 3.0 x 1.0 mm)

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MS560702BA03-50 from TE Connectivity is a high-resolution barometric pressure sensor module with 24-bit ADC, I2C/SPI interface, and stainless steel cap, optimized for altimeter and variometer applications with 20cm altitude resolution.

Key Specifications

Type Digital Barometric Pressure Sensor
Operating Range 10 to 1200 mbar
Supply Voltage 1.8 to 3.6 V
Resolution 0.016 mbar (24-bit ADC)
Accuracy +-1.5 mbar
Interface I2C and SPI (up to 20 MHz)
Standby Current 0.15 uA (typical)
Operating Temperature -40 to +85 C
Package QFN-8, 5.0 x 3.0 x 1.0 mm
Altitude Resolution 20 cm

Features

  • 24-bit delta-sigma ADC with factory calibrated coefficients
  • Dual interface: I2C and SPI up to 20 MHz
  • Ultra-low power: 0.15 uA standby, 1 uA active
  • High linearity and long-term stability
  • No external components required (internal oscillator)
  • Fast conversion down to 1 ms

Applications

  • Mobile altimeters and barometers
  • Bike computers and variometers
  • Weather stations and data loggers
  • Drone altitude hold systems
Product Introduction: MS560702BA03-50 Product Introduction

The MS560702BA03-50 from TE Connectivity (formerly Measurement Specialties) is a high-resolution barometric pressure sensor module in a compact QFN-8 package (5.0 x 3.0 x 1.0 mm). It integrates a high-linearity piezoresistive pressure sensor with a 24-bit delta-sigma ADC and factory-calibrated coefficients stored in internal PROM. The device operates from 1.8V to 3.6V with ultra-low standby current of 0.15uA, making it ideal for battery-powered applications. Supporting both I2C and SPI interfaces (up to 20MHz), the MS5607-02BA03 provides a precise digital 24-bit pressure and temperature output with altitude resolution of 20cm. The stainless steel cap ensures excellent media resistance. Multiple oversampling ratio (OSR) settings allow users to optimize for conversion speed versus current consumption. No external components are needed thanks to the internal oscillator.

Working Principle: MS560702BA03-50 Working Principle

The MS560702BA03-50 operates through three main subsystems: (1) Piezoresistive sensing element – A high-linearity pressure sensor die converts applied barometric pressure into a resistance change in a Wheatstone bridge configuration. The stainless steel cap protects the sensing element while allowing pressure transmission. (2) 24-bit delta-sigma ADC – The analog output from the pressure sensor is digitized by a high-resolution delta-sigma ADC. The ADC supports configurable oversampling ratios (256 to 4096), trading conversion time for resolution. At OSR=4096, the resolution reaches 0.016 mbar enabling 20cm altitude discrimination. (3) Digital signal processing – Factory-calibrated coefficients (6 coefficients stored in 128-bit PROM) compensate for temperature drift and non-linearity. The user reads raw D1 (pressure) and D2 (temperature) values, then applies the calibration algorithm specified in the datasheet to compute compensated pressure and temperature. The device supports I2C (address 0x76/0x77 selectable via CSB pin) and SPI Mode 0/3 interfaces.

Pin Description: MS560702BA03-50 Pin Definition and Functions
Pin Name Function
1 VDD Power supply (1.8-3.6V)
2 GND Ground
3 SDO/PS SPI data out / Protocol select (high=SPI, low=I2C)
4 SDI/SDA SPI data in / I2C data
5 SCLK SPI/I2C clock
6 CSB SPI chip select (active low) / I2C address select
7 NC Not connected
8 NC Not connected
Application Scenarios: In which products and applications is MS560702BA03-50 used
  • Mobile altimeter and barometer systems with 20cm altitude resolution for outdoor navigation
  • Bike computers and variometers leveraging ultra-low 0.15uA standby current
  • Weather stations and data loggers using factory-calibrated 24-bit pressure output
  • Drone altitude hold systems requiring fast 1ms conversion and dual I2C/SPI interface
Alternative Models: What chips are recommended as replacements for MS560702BA03-50
Model Manufacturer Key Difference
MS561101BA03-50 TE Connectivity Similar, 10-1200mbar, I2C/SPI
BMP280 Bosch 300-1100hPa, I2C/SPI, smaller 2×2.5mm
BME280 Bosch Adds humidity sensing
LPS22HB STMicroelectronics 260-1260hPa, lower power

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1