Opens in a new tab

MSP430F436IPNR

16-bit ultra-low-power MCU, 24KB Flash, 12-bit ADC, LCD driver, LQFP-80

3250

Effective Inventory

Image for reference only

Manufacturer Part:

MSP430F436IPNR

Package:

LQFP-80 (12.0 × 12.0 × 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MSP430F436IPNR is a 16-bit ultra-low-power mixed-signal microcontroller from Texas Instruments’ MSP430 family, featuring 24KB Flash, 1KB RAM, and an integrated LCD driver. It includes a 16-bit RISC CPU, multiple timers, a 12-bit ADC, USART, and a watchdog timer. Packaged in a 80-pin LQFP (PNR) package for industrial temperature range applications.

Key Specifications

Function 16-Bit Ultra-Low-Power Microcontroller
CPU MSP430 16-bit RISC
Flash 24KB
RAM 1KB
ADC 12-bit, 8-channel
LCD Driver Up to 96 segments
Timers Timer_A (5 capture/compare), Timer_B
Interface USART (UART/SPI)
Supply Voltage 1.8V to 3.6V
Package 80-pin LQFP (12 × 12 mm)
Operating Temperature -40°C to +85°C

Features

  • Ultra-low-power consumption for battery-operated applications
  • Integrated LCD driver supporting up to 96 segments
  • 12-bit ADC with 8 input channels and internal reference
  • Multiple low-power modes (LPM0-LPM4) with fast wake-up
  • 16-bit RISC architecture with 125ns instruction cycle at 8MHz
  • On-chip debug and in-system programmable Flash

Applications

  • Electric and gas metering with LCD display
  • Portable medical instruments
  • Industrial handheld measurement tools
  • Building automation thermostats
  • Battery-powered consumer electronics with LCD
Product Introduction: MSP430F436IPNR Product Introduction

The MSP430F436 is an ultra-low-power 16-bit mixed-signal microcontroller from TI’s MSP430F4xx family, optimized for battery-powered applications with LCD displays. It integrates 24KB of Flash memory, 1KB of RAM, a 12-bit SAR ADC, a powerful LCD driver supporting up to 96 segments, two timers (Timer_A and Timer_B), a USART interface, and a watchdog timer. The 16-bit RISC CPU executes instructions in a single cycle at up to 8MHz. Five low-power modes (LPM0-LPM4) reduce current consumption to below 1μA in standby, with fast wake-up times under 6μs, enabling aggressive duty cycling for long battery life.

Working Principle: MSP430F436IPNR Working Principle

The MSP430F436 is built around a 16-bit RISC CPU with a von Neumann architecture and a constant instruction cycle of 125ns at 8MHz. The CPU accesses Flash, RAM, and peripherals through a 16-bit address bus. The integrated LCD driver generates segment and common signals directly from an internal display memory, requiring no external LCD controller. The 12-bit ADC uses successive approximation and can be triggered by timers for automated periodic sampling. Low-power modes are central to the architecture: LPM0 keeps the CPU off but SMCLK and ACLK running; LPM3 keeps only the 32kHz ACLK running for RTC and interrupt wake-up; LPM4 shuts down everything. The device wakes from LPM3 in under 6μs via any interrupt, enabling extremely low average current consumption in duty-cycled applications.

Pin Description: MSP430F436IPNR Pin Definition and Functions
Pin Group Name Type Function
1-6, 35-44 LCD S0-S31 Output LCD segment driver outputs
7-10 COM0-COM3 Output LCD common driver outputs
11-18 P1.0-P6.7 I/O General-purpose I/O with interrupt capability
19-22 A0-A7 Input ADC analog input channels
23 AVCC/AVSS Power Analog supply and ground
24-25 DVCC/DVSS Power Digital supply and ground
26 XIN/XOUT I/O 32kHz crystal oscillator
27 RST/NMI Input Reset / non-maskable interrupt
28 TCK/TMS/TDI/TDO I/O JTAG debug interface
Application Scenarios: In which products and applications is MSP430F436IPNR used
  • Single-phase electric meter with LCD display and RTC
  • Portable blood pressure monitor with 12-bit ADC and LCD
  • Industrial handheld temperature logger with LCD readout
  • Smart thermostat with segment LCD and wireless interface
  • Battery-powered gas meter with ultra-low-power standby
Alternative Models: What chips are recommended as replacements for MSP430F436IPNR
Manufacturer Part Number Package Notes
TI MSP430F437IPNR LQFP-80 32KB Flash, 1KB RAM variant
TI MSP430F435IPNR LQFP-80 16KB Flash, 512B RAM variant
TI MSP430F4794 LQFP-100 60KB Flash, 2KB RAM, more I/O
Microchip PIC24FJ128GA TQFP-100 16-bit MCU with LCD controller
Renesas RL78/L1C LQFP-80 Low-power MCU with LCD driver

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1