Opens in a new tab

Home » Analog Linear ICs, Integrated Circuits ICs » MT25QL512ABB1EW9-0SIT

MT25QL512ABB1EW9-0SIT

512Mbit NOR Flash, QSPI 133MHz, 1.8V, BGA-24

3456

Effective Inventory

Image for reference only

Manufacturer Part:

MT25QL512ABB1EW9-0SIT

Package:

BGA-24 (6.0 x 8.0 x 1.0 mm, 0.8mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MT25QL512ABB1EW9-0SIT from Micron Technology is a 512Mbit (64MB) multi-I/O NOR Flash with 133MHz SPI, 4KB/32KB/64KB erase, and BGA-24 package.

Key Specifications

Type 512Mbit Multi-I/O NOR Flash
Density 512 Mbit (64 Mbyte)
Organization 67,108,864 x 8 bits
Interface SPI / Dual SPI / Quad SPI
Max Clock 133 MHz (SPI); 80 MHz (QPI)
Max Data Rate 533 Mbps (Quad SPI at 133MHz, DDR)
Erase Block Sizes 4 KB / 32 KB / 64 KB
Page Size 256 bytes
Program Time 0.3 ms (typical, 256-byte page)
Erase Time 45 ms (64KB block, typical)
Supply Voltage 1.7V to 2.0V (1.8V typical)
Package BGA-24 (6 x 8 x 1.0 mm, 0.8mm pitch)
Operating Temperature -40C to +85C (SIT suffix)

Features

  • 512Mbit (64MB) density in BGA-24
  • Single/Dual/Quad SPI interface
  • 133 MHz clock with Quad I/O (DDR) for 533Mbps throughput
  • 4KB/32KB/64KB uniform erase block sizes
  • 1.8V low-power operation
  • Deep power-down mode: 5 uA typical

Applications

  • FPGA configuration storage
  • Embedded Linux root file system
  • Boot code storage for high-end MCUs
  • Data logging and firmware updates
Product Introduction: MT25QL512ABB1EW9-0SIT Product Introduction

The MT25QL512ABB1EW9-0SIT from Micron Technology is a 512Mbit (64 Mbyte) multi-I/O NOR Flash memory in a BGA-24 package. The device supports standard SPI, Dual SPI, and Quad SPI interfaces, with data rates up to 533 Mbps in Quad SPI DDR mode at 133 MHz clock. The 64MB density provides ample storage for FPGA bitstreams, boot code, and embedded file systems. The uniform 4KB/32KB/64KB erase block sizes optimize flexibility for wear-leveling algorithms in firmware-over-the-air (FOTA) update scenarios. The 1.8V supply voltage reduces power consumption compared to 3.3V Flash devices. The deep power-down mode draws only 5 uA, making it suitable for always-connected IoT devices. The BGA-24 package provides a compact footprint with reliable solder joint reliability for automotive and industrial applications.

Working Principle: MT25QL512ABB1EW9-0SIT Working Principle

The MT25QL512ABB1EW9-0SIT stores data in a NOR-type Flash memory array using floating-gate MOSFET cells. Each cell stores one bit by trapping charge on a floating gate that modifies the transistor’s threshold voltage. During programming, a high voltage (approximately 16V) is applied to the control gate while the source is grounded, causing hot-electron injection from the channel into the floating gate (CHE programming). During erasure, a high voltage is applied to the source while the control gate is grounded, causing Fowler-Nordheim tunneling that removes charge from the floating gate. The SPI interface provides serial command access: the master sends an 8-bit opcode, followed by 24-bit address and optional dummy cycles, then reads or writes data. In Quad SPI mode, data is transferred 4 bits per clock cycle, achieving 4x throughput. In DDR (Double Data Rate) mode, data is transferred on both rising and falling clock edges, doubling throughput again to 8x the base clock rate. The uniform block architecture allows fine-grained erase management for wear leveling.

Pin Description: MT25QL512ABB1EW9-0SIT Pin Definition and Functions
Pin Name Type Function
A1 SCK Input Serial clock
A2 CS# Input Chip select (active LOW)
B1 SI/IO0 I/O SPI data in / QSPI IO0
B2 SO/IO1 I/O SPI data out / QSPI IO1
C1 WP#/IO2 I/O Write protect / QSPI IO2
C2 HOLD#/IO3 I/O Hold / QSPI IO3
D1 VCC Power 1.8V supply
D2 VSS Power Ground
Application Scenarios: In which products and applications is MT25QL512ABB1EW9-0SIT used
  • Xilinx Ultrascale+ FPGA configuration storage with 64MB QSPI at 133MHz
  • Embedded Linux root file system on ARM Cortex-A with 533Mbps QSPI DDR
  • Automotive ECU firmware storage with 4KB sectors for wear-leveling FOTA updates
  • Industrial IoT gateway boot code with 5uA deep power-down for battery backup
Alternative Models: What chips are recommended as replacements for MT25QL512ABB1EW9-0SIT
Manufacturer Part Number Package Notes
Micron MT25QU512ABB1EW9-0SIT BGA-24 3.3V version
Micron MT25QL256ABB1EW9-0SIT BGA-24 256Mbit, half density
Infineon S25FL512SAGMFI010 BGA-24 512Mbit, similar class
Macronix MX66L1G45GMI-08G BGA-24 1Gbit, higher density
Winbond W25Q512JVFIQ BGA-24 512Mbit, alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1