Opens in a new tab

MT48LC4M16A2P-6A:J

64Mb SDRAM, 4Mx16, 166MHz, CL2/3, 3.3V, 54-pin TSOP-II

4231

Effective Inventory

Image for reference only

Manufacturer Part:

MT48LC4M16A2P-6A:J

Package:

54-pin TSOP-II (22 x 10.16 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MT48LC4M16A2P-6A:J from Micron Technology is a 64Mb (4Meg x 16) SDRAM operating at 166MHz with a 6ns clock access time. Featuring a single 3.3V supply and programmable CAS latency of 2 or 3, it provides high-bandwidth memory for networking, computing, and consumer applications in a 54-pin TSOP-II package.

Key Specifications

Density 64 Mb (4M x 16)
Organization 4 Meg x 16
Max Clock Frequency 166 MHz
Clock Access Time 6 ns (CL=2)
Supply Voltage 3.3V (3.0V to 3.6V)
Interface LVCMOS
CAS Latency 2, 3 (programmable)
Banks 4
Package 54-pin TSOP-II
Operating Temperature 0°C to +70°C (commercial)

Features

  • Single 3.3V power supply with LVCMOS interface
  • Programmable CAS latency of 2 or 3 for system flexibility
  • Programmable burst length of 1, 2, 4, 8, or full page
  • Four internal banks for concurrent operation
  • Auto refresh and self refresh modes
  • Byte-level read/write masking via DQM pins

Applications

  • Networking and telecommunications equipment buffering
  • Embedded computing and industrial control frame buffers
  • Consumer electronics video and audio buffering
  • Printer and imaging system data storage
  • Digital set-top box and display controller memory
Product Introduction: MT48LC4M16A2P-6A:J Product Introduction

The MT48LC4M16A2P-6A:J is a 64-megabit synchronous DRAM from Micron Technology organized as 4,194,304 words by 16 bits. It operates at clock frequencies up to 166MHz with a -6 speed grade, providing high-bandwidth data throughput for memory-intensive applications. The device features four internal banks that can operate concurrently, programmable CAS latency of 2 or 3, and programmable burst lengths of 1, 2, 4, 8, or full page. Auto-refresh and self-refresh modes ensure data integrity, while DQM pins provide byte-level masking for read and write operations. The 3.3V LVCMOS-compatible interface and 54-pin TSOP-II package make it suitable for a wide range of networking, computing, and consumer electronic applications.

Working Principle: MT48LC4M16A2P-6A:J Working Principle

The MT48LC4M16A2P-6A:J operates using a synchronous DRAM architecture with three key subsystems. (1) The command decode and control logic processes inputs from CS, RAS, CAS, WE, and address lines on the rising clock edge to determine the operation mode (activate, read, write, precharge, refresh, mode register set). The mode register stores configuration settings including CAS latency, burst length, and burst type. (2) The memory array consists of four independent banks, each containing a 1Mx16 DRAM cell array with row and column decoders. The activate command opens a row in a selected bank, and subsequent read/write commands access columns within that row. (3) The data path includes a 16-bit bidirectional data bus with DQM masking, and the I/O buffers support burst-mode data transfer at the full clock rate, achieving peak bandwidth of 332MB/s at 166MHz.

Pin Description: MT48LC4M16A2P-6A:J Pin Definition and Functions
Pin Name Function
A0-A11 Address Row/column address inputs, BA0/BA1 bank select
DQ0-DQ15 Data Bidirectional data bus
CLK Clock System clock input
CKE Clock Enable Clock enable / self-refresh control
CS Chip Select Chip select (active low)
RAS Row Address Strobe Command input (active low)
CAS Column Address Strobe Command input (active low)
WE Write Enable Command input (active low)
DQML/DQMH Data Mask Lower/upper byte data mask
VDD/VDDQ Power 3.3V core and I/O supply
VSS/VSSQ Ground Core and I/O ground
Application Scenarios: In which products and applications is MT48LC4M16A2P-6A:J used
  • Networking equipment packet buffering and queue management memory
  • Embedded processor system main memory for industrial controllers
  • Video frame buffering in consumer electronics and display controllers
  • Imaging and printing system data storage pipelines
  • Digital set-top box and DVR memory subsystems
Alternative Models: What chips are recommended as replacements for MT48LC4M16A2P-6A:J
Model Manufacturer Key Difference
MT48LC4M16A2P-75 Micron 133MHz, 7.5ns speed grade
MT48LC8M16A2P-6 Micron 128Mb, 8Mx16 density
IS42S16400J-6TL ISSI 64Mb SDRAM equivalent, TSOP-II
W9812G6KH-6 Winbond 64Mb SDRAM equivalent, TSOP-II
EM638165TS-6G Etron 64Mb SDRAM equivalent, TSOP-II

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1