Opens in a new tab

Home » Integrated Circuits ICs » MX25L512EOI-10G

MX25L512EOI-10G

512Kbit SPI NOR Flash, 104MHz, 2.7-3.6V, 8-TSSOP, Low Density

10567

Effective Inventory

Image for reference only

Manufacturer Part:

MX25L512EOI-10G

Package:

8-TSSOP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MX25L512EOI-10G is a 512Kbit serial NOR Flash memory from Macronix featuring standard SPI interface. It is the smallest density member of the MX25L series, organized as 512K x 1 bit or 64K x 8 bits equivalent. The device comes in an 8-TSSOP package, operates from 2.7V to 3.6V supply voltage, and supports clock frequencies up to 104MHz. It provides a cost-effective, low-density non-volatile storage solution for embedded applications requiring minimal code or parameter storage.

Key Specifications

Memory Type FLASH – NOR (Non-Volatile)
Memory Size 512Kbit (64K x 8)
Interface SPI (Single I/O)
Clock Frequency 104 MHz (max)
Voltage Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 85°C
Package 8-TSSOP
Page Size 256 bytes
Sector Size 4KB
Endurance 100,000 cycles

Features

  • Standard Serial Peripheral Interface (SPI) – Mode 0 & Mode 3
  • Fast read clock frequency up to 104MHz
  • 512Kbit density: 65,536 x 8 bits equivalent
  • Uniform 4KB sectors (16 sectors total)
  • Uniform 32KB blocks / 64KB blocks
  • Page program operation: 256 bytes per page
  • Hardware write protection via WP# pin
  • Software block protection (BP bits)
  • Deep power-down mode
  • Hardware HOLD# function
  • Low power CMOS design
  • JEDEC standard manufacturer and device ID
  • RoHS compliant package

Applications

  • Small code storage for microcontrollers
  • Configuration parameters and settings
  • Serial number and ID storage
  • Consumer electronics
  • Industrial sensors
  • Networking modules
  • Automotive accessories
  • Medical device calibration data
Product Introduction: MX25L512EOI-10G Product Introduction

The MX25L512EOI-10G is a 512Kbit CMOS serial NOR Flash memory from Macronix’s MX25L05 series. It provides standard SPI interface supporting clock frequencies up to 104MHz, making it one of the fastest low-density serial flashes available. The 512Kbit memory is organized as 524,288 x 1 bit and features 16 uniform 4KB sectors for flexible erase operations. The device includes standard features such as hardware write protection, software-configurable block protection via status register BP bits, deep power-down mode for minimal standby power, and HOLD# function for pausing serial communication without deselecting the chip. Manufactured using Macronix’s advanced CMOS technology, it offers 100,000 program/erase cycle endurance and 20-year data retention. The 8-pin TSSOP package provides a compact, thin profile form factor. This low-density device is ideal for applications requiring small amounts of non-volatile storage such as configuration parameters, calibration data, serial numbers, or small boot code.

Working Principle: MX25L512EOI-10G Working Principle

The MX25L512E operates as a standard SPI serial NOR Flash memory. The device is selected by driving CS# low, after which an 8-bit command code is shifted in on the SI pin synchronized with SCLK. For read operations, a 24-bit address follows the command, then data is shifted out on the SO pin. Despite only being 512Kbit, the device uses standard 24-bit addressing where only the lower address bits are significant. The device supports normal READ (03h) and FAST_READ (0Bh) commands, with FAST_READ enabling higher clock frequencies by inserting dummy cycles. Program operations use the Page Program command to write up to 256 bytes. Erase can be performed at the sector level (4KB), block level, or chip level. All program and erase operations are automatically timed by an internal state machine. The status register’s WIP bit indicates when an operation is in progress. Block protection can be configured to protect the top 1/2, 1/4, 1/8, or entire chip from program/erase operations.

Pin Description: MX25L512EOI-10G Pin Definition and Functions
Pin Number Pin Name Type Description
1 CS# Input Chip Select, active low
2 SO Output Serial Data Output
3 WP# Input Write Protect, active low
4 GND Ground Ground connection
5 SI Input Serial Data Input
6 SCLK Input Serial Clock input
7 HOLD# Input Hold input for pausing communication
8 VCC Power Power supply 2.7V-3.6V
Application Scenarios: In which products and applications is MX25L512EOI-10G used
  • Microcontroller small boot code storage
  • Device configuration and parameter settings
  • Serial number and unique ID storage
  • Consumer electronics small memory needs
  • Industrial sensor calibration data
  • Network module configuration
  • Automotive accessory memory
  • Medical device calibration and settings
Alternative Models: What chips are recommended as replacements for MX25L512EOI-10G
Manufacturer Part Number Description
Macronix MX25L512EMC-12G 512Kbit SPI Flash, 8-SOP package
Winbond W25X512CLSNIG 512Kbit SPI Flash, 75MHz, 8-SOIC
Microchip SST25VF512A-33-4I-SAE 512Kbit SPI Flash, 33MHz, 8-SOIC
GigaDevice GD25Q512ETIG 512Kbit SPI Flash, Quad I/O, 120MHz, 8-SOP

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1