Opens in a new tab

Home » Integrated Circuits ICs » MX25U6435FM2I-10G

MX25U6435FM2I-10G

64Mbit 1.8V SPI NOR Flash, Quad I/O, QPI, 133MHz, 8-SOP, Industrial Grade

9876

Effective Inventory

Image for reference only

Manufacturer Part:

MX25U6435FM2I-10G

Package:

8-SOP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MX25U6435FM2I-10G is a 64Mbit 1.8V multi-I/O SPI NOR Flash memory from Macronix’s MX25U series. It supports Single I/O, Dual I/O, and Quad I/O operations with QPI (Quad Peripheral Interface) mode, operating at clock frequencies up to 104MHz (standard) / 133MHz (enhanced). The device comes in a 200mil 8-SOP package, operates from 1.65V to 2.0V, and features Program/Erase Suspend/Resume, Fast Boot, Advanced Sector Protection, Password Protection, and Secured OTP. Manufactured using advanced process technology for low power and high performance.

Key Specifications

Memory Type FLASH – NOR (Non-Volatile)
Memory Size 64Mbit (8M x 8)
Interface SPI – Quad I/O, QPI
Clock Frequency 104MHz (standard) / 133MHz (enhanced)
Voltage Supply 1.65V ~ 2.0V (1.8V nominal)
Operating Temperature -40°C ~ 85°C
Package 8-SOP (200mil)
Page Size 256 bytes
Endurance 100,000 cycles typical
Data Retention 20 years

Features

  • MXSMIO™: Single I/O, Dual I/O, Quad I/O support
  • Quad Peripheral Interface (QPI) mode
  • 104MHz standard / 133MHz enhanced clock frequency
  • Uniform 4KB sectors and 64KB blocks
  • Fast Boot (XIP) mode support
  • Program/Erase Suspend and Resume
  • Burst Read with wrap-around
  • Advanced Sector Protection (Individual + Password)
  • Secured OTP: 8K-bit
  • Hardware Reset support
  • Unique ID feature
  • Deep power-down mode
  • SFDP (Serial Flash Discoverable Parameters)
  • RoHS compliant and halogen-free

Applications

  • 1.8V low-power embedded systems
  • Mobile and handheld devices
  • IoT and wearable electronics
  • Portable medical devices
  • Wireless communication modules
  • Tablets and smartphones
  • SSD firmware storage
  • Networking equipment with 1.8V rails
Product Introduction: MX25U6435FM2I-10G Product Introduction

The MX25U6435FM2I-10G is a 64Mbit 1.8V CMOS serial multi-I/O NOR Flash memory from Macronix’s MX25U low-voltage series. Designed specifically for 1.8V system designs, it operates from 1.65V to 2.0V nominal, making it ideal for mobile and battery-powered applications. The device features MXSMIO™ technology supporting Single I/O, Dual I/O, and Quad I/O modes, along with QPI mode for maximum throughput. The 64Mbit memory is organized as 8M x 8 bits with uniform 4KB sectors, 32KB blocks, and 64KB blocks for flexible erase operations. Advanced features include Fast Boot mode for execute-in-place (XIP) applications, Program/Erase Suspend and Resume, Burst Read with configurable wrap length, Advanced Sector Protection with individual block protection and password protection, 8K-bit secured OTP memory, hardware reset, and unique ID. The 8-pin 200mil SOP package provides a standard compact form factor. It is in production and recommended for new designs in 1.8V applications requiring reliable, high-performance non-volatile storage.

Working Principle: MX25U6435FM2I-10G Working Principle

The MX25U6435F operates as a 1.8V multi-I/O serial NOR Flash memory optimized for low-voltage operation. In standard SPI mode, data transfer occurs via SI/SO pins at SCLK rates up to 104MHz. In Quad I/O mode, all four data pins (SI/SO/WP/HOLD) are used for bidirectional data transfer, providing four times the throughput. QPI mode further optimizes by allowing commands and addresses on all four I/O pins, reducing protocol overhead. The device uses 24-bit addressing for the 64Mbit capacity. Program operations support standard Page Program and Quad Page Program (4PP) modes. The internal state machine manages all program and erase operations automatically, with status available via status register polling. Program/Erase Suspend/Resume allows temporarily pausing operations to access other memory regions. Advanced sector protection provides both individual block protection (non-volatile) and password-protected access control. The low-voltage design includes optimized charge pumps and sense amplifiers for reliable operation across the full 1.65V-2.0V range.

Pin Description: MX25U6435FM2I-10G Pin Definition and Functions
Pin Number Pin Name Type Description
1 CS# Input Chip Select, active low
2 SO/SIO1 I/O Serial Output / I/O1 in multi-I/QPI mode
3 WP#/SIO2 I/O Write Protect / I/O2 in quad/QPI mode
4 GND Ground Ground connection
5 SI/SIO0 I/O Serial Input / I/O0
6 SCLK Input Serial Clock input
7 HOLD#/RESET#/SIO3 I/O Hold/Reset / I/O3 in quad/QPI mode
8 VCC Power Power supply 1.65V-2.0V
Application Scenarios: In which products and applications is MX25U6435FM2I-10G used
  • Low-power 1.8V embedded systems
  • Mobile phones and tablets
  • Wearable technology and smart watches
  • Portable medical devices
  • Wireless modems and RF modules
  • SSD controller firmware
  • Enterprise networking equipment
  • IoT edge devices
Alternative Models: What chips are recommended as replacements for MX25U6435FM2I-10G
Manufacturer Part Number Description
Macronix MX25U6432FM2I02 64Mbit 1.8V Flash, 75nm process variant
Winbond W25Q64JWSSIQ 64Mbit 1.8V SPI Flash, Quad I/O, 133MHz
Micron MT25QU64ABB1EW9-0AAT 64Mbit 1.8V SPI Flash, Quad I/O, 133MHz
GigaDevice GD25LQ64CTIG 64Mbit 1.8V SPI Flash, Quad I/O, 120MHz

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1