Opens in a new tab

NC7SB3257P6X

SPDT bus switch, 1.65-5.5V, 5Ω RON, 0.25ns, MicroPak-6

9125

Effective Inventory

Image for reference only

Manufacturer Part:

NC7SB3257P6X

Package:

MicroPak-6 (1.45 x 1.0 x 0.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NC7SB3257P6X is a single-pole double-throw (SPDT) bus switch in a tiny 6-pin MicroPak package. This 1-bit multiplexer/demultiplexer switch features low on-resistance and low propagation delay, suitable for signal routing and bus isolation in space-constrained applications.

Key Specifications

Configuration 1-bit SPDT (2:1 Mux/Demux)
Supply Voltage 1.65 V to 5.5 V
RON Max 5 Ω @ 4.5 V
Propagation Delay 0.25 ns typ
Bandwidth > 500 MHz
ICC Max 1 µA
Operating Temperature -55 °C to +125 °C
Package MicroPak-6 (1.45 x 1.0 mm)

Features

  • Ultra-small MicroPak-6 package (1.45 x 1.0 mm)
  • Wide supply voltage: 1.65 V to 5.5 V
  • Low on-resistance: 5 Ω max at 4.5 V
  • Sub-nanosecond propagation delay
  • High bandwidth: > 500 MHz
  • Low power: 1 µA max ICC
  • I/O tolerant to 5.5 V

Applications

  • Signal routing and multiplexing
  • Bus isolation and switching
  • Level translation between voltage domains
  • Portable device signal path management
Product Introduction: NC7SB3257P6X Product Introduction

The onsemi NC7SB3257P6X is a single-pole double-throw (SPDT) bus switch designed for signal routing and multiplexing in high-speed, space-constrained applications. The device functions as a 2:1 multiplexer or 1:2 demultiplexer, routing one of two input signals to a common output based on the select (S) pin. With an on-resistance of only 5 Ω maximum at 4.5 V supply and sub-nanosecond propagation delay, it provides near-transparent signal switching with minimal degradation. The wide 1.65 V to 5.5 V supply range supports mixed-voltage designs, and the I/O pins are 5.5 V tolerant, enabling level translation between different voltage domains. The ultra-small MicroPak-6 package (1.45 x 1.0 mm) occupies minimal board space, making it ideal for portable devices and high-density PCBs. The 1 µA maximum supply current ensures negligible power consumption in always-on signal path applications.

Working Principle: NC7SB3257P6X Working Principle

The NC7SB3257P6X uses a CMOS transmission gate architecture for signal switching. Each switch path consists of a parallel NMOS and PMOS transistor pair (transmission gate) that can pass signals from 0 V to VCC with low and relatively flat on-resistance. The select (S) pin controls which of the two input paths (A or B) is connected to the common output (COM). When S is low, the A-to-COM path is enabled and B-to-COM is high-impedance. When S is high, the B-to-COM path is enabled and A-to-COM is high-impedance. The transmission gate structure ensures that the on-resistance remains approximately constant across the full signal voltage range, unlike a single NMOS or PMOS switch whose resistance varies with signal level. The ultra-fast 0.25 ns propagation delay is achieved by minimizing parasitic capacitance and resistance in the signal path. When disabled, the switch presents a high-impedance state, effectively isolating the signal paths.

Pin Description: NC7SB3257P6X Pin Definition and Functions
Pin Name Type Function
1 S Input Select input (low=A, high=B)
2 A I/O Switch input/output A
3 GND Ground Ground
4 B I/O Switch input/output B
5 COM I/O Common input/output
6 VCC Power Supply voltage (1.65-5.5V)
Application Scenarios: In which products and applications is NC7SB3257P6X used
  • USB signal routing between host and device
  • Audio signal path switching in portable devices
  • I2C/SPI bus multiplexing for shared peripherals
  • Battery-backed signal isolation in RTC circuits
Alternative Models: What chips are recommended as replacements for NC7SB3257P6X
Manufacturer Part Number Package Notes
TI SN74LVC1G3157DCKR SC-70-6 SPDT switch, similar specs
Nexperia 74LVC1G3157GW SOT-363 SPDT switch, 6-pin
onsemi FSA3157P6X MicroPak-6 SPDT switch, very similar
Rohm BUS1G3157WE2 SSOT-6 SPDT bus switch

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1