Opens in a new tab

Home » Integrated Circuits ICs » NC7SZ19P6X

NC7SZ19P6X

1-of-2 decoder/demux, 1.65-5.5V, 3ns, MicroPak-6

5471

Effective Inventory

Image for reference only

Manufacturer Part:

NC7SZ19P6X

Package:

MicroPak-6 (1.45 x 1.0 x 0.5 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NC7SZ19P6X is a 1-of-2 decoder/demultiplexer with an active-low enable in a MicroPak-6 package. Operating from 1.65 V to 5.5 V, it routes one input signal to one of two outputs based on a select input, suitable for address decoding and signal routing.

Key Specifications

Function 1-of-2 Decoder/Demultiplexer
Supply Voltage 1.65 V to 5.5 V
Propagation Delay 3.0 ns typ @ 3.0V
Select to Output 4.5 ns typ @ 3.0V
Output Drive ±24 mA @ 3.0V
ICC Max 1 µA
Operating Temperature -55 °C to +125 °C
Package MicroPak-6 (1.45 x 1.0 mm)

Features

  • 1-of-2 decoder with active-low enable
  • Wide supply range: 1.65 V to 5.5 V
  • Non-inverting data path
  • Fast propagation: 3.0 ns at 3.0 V
  • High output drive: ±24 mA at 3.0 V
  • Ultra-small MicroPak-6 package
  • Overvoltage tolerant inputs

Applications

  • Address decoding for memory-mapped peripherals
  • Signal demultiplexing and routing
  • Clock distribution to alternate destinations
  • Chip select generation from address lines
Product Introduction: NC7SZ19P6X Product Introduction

The onsemi NC7SZ19P6X is a single-gate 1-of-2 decoder/demultiplexer in an ultra-small MicroPak-6 package. It routes a single data input (D) to one of two outputs (Y0 or Y1) based on the state of the select (S) input, with the non-selected output driven high. An active-low enable (E) input forces both outputs high when de-asserted, providing bus isolation capability. The wide 1.65 V to 5.5 V supply range supports mixed-voltage designs, and the overvoltage-tolerant inputs allow direct connection to higher-voltage signal sources. The 3.0 ns propagation delay at 3.0 V enables use in high-speed address decoding and signal routing. The ±24 mA output drive can directly interface with multiple downstream logic inputs. The tiny MicroPak-6 package enables point-of-need signal routing in space-constrained designs, replacing larger SOIC/TSSOP decoder packages.

Working Principle: NC7SZ19P6X Working Principle

The NC7SZ19P6X implements a 1-of-2 decoder/demultiplexer using CMOS logic gates. The device has three inputs: data (D), select (S), and enable (E). When the enable input E is low (active), the data input D is routed to output Y0 (if S is low) or Y1 (if S is high). The non-selected output is driven to logic high. When E is high (inactive), both Y0 and Y1 are forced high regardless of D and S, providing a disable function. The truth table is: E=0, S=0 → Y0=D, Y1=1; E=0, S=1 → Y0=1, Y1=D; E=1 → Y0=1, Y1=1. This function is the complement of a 2:1 multiplexer — instead of selecting which input drives the output, the decoder selects which output the input drives. The CMOS implementation provides low static power consumption (1 µA max) with fast switching speeds. The non-inverting data path means the selected output directly follows the input without logical inversion.

Pin Description: NC7SZ19P6X Pin Definition and Functions
Pin Name Type Function
1 E Input Enable (active low)
2 D Input Data input
3 GND Ground Ground
4 Y1 Output Output 1 (active when S=1)
5 Y0 Output Output 0 (active when S=0)
6 VCC Power Supply voltage (1.65-5.5V)
Application Scenarios: In which products and applications is NC7SZ19P6X used
  • Memory-mapped I/O address decoding
  • Chip select generation from address lines
  • Clock or data signal demultiplexing to two destinations
  • Peripheral enable routing in MCU-based systems
Alternative Models: What chips are recommended as replacements for NC7SZ19P6X
Manufacturer Part Number Package Notes
TI SN74LVC1G19DCKR SC-70-6 1-of-2 decoder, similar function
Nexperia 74LVC1G19GW SOT-363 1-of-2 decoder/demux
onsemi MC74VHC1G19DFT1G SC-88A Similar decoder function
Diodes Inc 74LVC1G19DW-7 SOT-363 1-of-2 decoder

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1