Opens in a new tab

Home » Integrated Circuits ICs » NC7WZ16P6X

NC7WZ16P6X

Dual buffer/line driver, 3-state, 1.65-3.6V, 1.5ns, MicroPak-6

7643

Effective Inventory

Image for reference only

Manufacturer Part:

NC7WZ16P6X

Package:

MicroPak-6 (1.45 x 1.0 x 0.5 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The onsemi NC7WZ16P6X is a dual buffer/line driver with 3-state outputs in a MicroPak-6 package. Operating from 1.65 V to 3.6 V, it provides high-speed signal buffering with output enable control for bus-oriented applications.

Key Specifications

Function Dual Buffer/Line Driver with 3-State
Supply Voltage 1.65 V to 3.6 V
Propagation Delay 1.5 ns typ @ 3.0V
Output Drive ±24 mA @ 3.0V
Output Enable Active-low (shared OE pin)
ICC Max 1 µA (3-state)
Operating Temperature -55 °C to +125 °C
Package MicroPak-6 (1.45 x 1.0 mm)

Features

  • Dual non-inverting buffer with shared 3-state enable
  • Ultra-fast propagation: 1.5 ns at 3.0 V
  • High output drive: ±24 mA at 3.0 V
  • 3-state outputs for bus sharing
  • Wide supply range: 1.65 V to 3.6 V
  • Ultra-small MicroPak-6 package
  • Power-off high-impedance I/O

Applications

  • Bus driver and signal buffering
  • Clock distribution and signal fanout
  • Address and data bus isolation
  • High-speed signal routing in portable devices
Product Introduction: NC7WZ16P6X Product Introduction

The onsemi NC7WZ16P6X is a dual non-inverting buffer/line driver with 3-state outputs, designed for high-speed signal buffering and bus driving in low-voltage applications. Each buffer provides non-inverted signal gain with 1.5 ns propagation delay at 3.0 V, making it suitable for clock distribution and high-speed data bus driving. The shared active-low output enable (OE) pin places both outputs in a high-impedance state, allowing multiple devices to share a common bus without contention. The ±24 mA output drive at 3.0 V can drive heavily-loaded bus lines and multiple downstream inputs. The 1.65 V to 3.6 V supply range covers common low-voltage logic families. The ultra-small MicroPak-6 package enables signal conditioning at the point of need in space-constrained designs. When the device is powered down or OE is de-asserted, the I/O pins enter a high-impedance state, preventing back-driving of signal lines.

Working Principle: NC7WZ16P6X Working Principle

The NC7WZ16P6X contains two independent non-inverting buffer channels with a shared output enable (OE) control. Each buffer consists of a CMOS input stage, a push-pull output stage, and a 3-state control circuit. When OE is low (active), each buffer drives its output to the same logic level as its input, providing signal amplification and fanout capability. The ±24 mA output current can drive capacitive loads and transmission lines with fast edge rates. When OE is high, both outputs enter a high-impedance (3-state) condition, effectively disconnecting them from the bus. This allows other devices to drive the same bus lines without contention. The 1.5 ns propagation delay is achieved through optimized CMOS transistor sizing and minimal parasitic capacitance. The non-inverting function means the output follows the input without inversion, preserving signal polarity for clock and data paths. The device includes a power-off isolation feature that ensures the I/O pins remain high-impedance when VCC is 0 V, preventing back-powering of the source circuit.

Pin Description: NC7WZ16P6X Pin Definition and Functions
Pin Name Type Function
1 1A Input Buffer 1 input
2 N/C – No connect
3 GND Ground Ground
4 OE Input Output enable (active low)
5 2Y Output Buffer 2 output (3-state)
6 VCC Power Supply voltage (1.65-3.6V)
Application Scenarios: In which products and applications is NC7WZ16P6X used
  • Clock buffer for fanout to multiple loads
  • Address/data bus driver with bus sharing
  • Signal isolation between processor and peripherals
  • High-speed signal conditioning in portable electronics
Alternative Models: What chips are recommended as replacements for NC7WZ16P6X
Manufacturer Part Number Package Notes
TI SN74LVC2G126DCKR SC-88-8 Dual buffer with individual OE
Nexperia 74LVC2G126GW SOT-363 Dual buffer with 3-state
onsemi NC7WZ16K8X US8-8 Same function, different package
TI SN74LVC1G126DCKR SC-70-5 Single buffer with 3-state

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1