Opens in a new tab

NCP1014AP060G

Integrated 700V MOSFET switching regulator, 60kHz, 10W, SOT-223, self-supplied, skip-cycle

5872

Effective Inventory

Image for reference only

Manufacturer Part:

NCP1014AP060G

Package:

SOT-223-3 6.5 x 3.5 x 1.6 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The onsemi NCP1014AP060G is a monolithic high-voltage switching regulator integrating a 700V MOSFET and PWM controller in a single SOT-223 package. Operating at 60 kHz fixed frequency with current-mode control, it provides up to 10W output power in universal off-line SMPS applications. The device features self-supply, skip-cycle light-load operation, and comprehensive protection circuitry.

Key Specifications

Topology Offline Switching Regulator (Integrated MOSFET)
MOSFET Breakdown Voltage 700 V
Maximum Drain Current 450 mA
Switching Frequency 60 kHz (Fixed)
Maximum Output Power 10 W (Universal Input)
UVLO Threshold 8.5V (On), 7.5V (Off)
Operating Temperature -40°C to +125°C
Package SOT-223-3

Features

  • Integrated 700V power MOSFET reduces component count and board space
  • Self-supply from high-voltage rail eliminates auxiliary winding
  • Skip-cycle operation for ultra-low standby power
  • Current-mode control with internal LEB
  • Short-circuit and over-temperature protection
  • Frequency jittering for reduced EMI filtering requirements
  • Compact SOT-223 package for space-constrained designs
  • Pb-Free, RoHS compliant

Applications

  • AC-DC adapters and chargers up to 10W
  • Standby and auxiliary power supplies
  • Smart meter and IoT device power
  • Household appliance control board supplies
  • Industrial auxiliary power rails
Product Introduction: NCP1014AP060G Product Introduction

The onsemi NCP1014AP060G is a monolithic high-voltage switching regulator that integrates a 700V power MOSFET and a current-mode PWM controller in a compact SOT-223 package. Operating at a fixed 60 kHz switching frequency, the device can deliver up to 10W output power from universal AC input (85-265VAC). The integrated approach significantly reduces external component count and PCB area compared to discrete controller-plus-MOSFET solutions. The device is self-supplied from the high-voltage DC rail through an internal startup current source, eliminating the need for an auxiliary transformer winding. During light-load conditions, the controller enters skip-cycle mode, reducing standby power consumption to very low levels. Comprehensive protection includes short-circuit protection, over-temperature shutdown, and internal leading-edge blanking. Frequency jittering is implemented to reduce EMI filter requirements.

Working Principle: NCP1014AP060G Working Principle

The NCP1014AP060G combines a 700V power MOSFET and PWM controller on a single monolithic IC. The internal startup current source charges the VCC capacitor from the HV drain pin. Once VCC reaches the UVLO turn-on threshold (8.5V), the MOSFET begins switching at 60 kHz with current-mode control. The feedback signal (via optocoupler) sets the peak current setpoint. The current sense is performed internally through the MOSFET’s on-resistance. When the load decreases and the feedback voltage falls below the skip threshold, the device enters skip-cycle mode, gating off switching pulses to reduce power consumption. The internal LEB circuit suppresses the turn-on current spike. Short-circuit protection activates when the feedback loop is open and the peak current reaches maximum for several consecutive cycles. Over-temperature shutdown disables switching at approximately 140°C. The self-supply mechanism draws power from the drain pin during the MOSFET off-time, maintaining VCC without an auxiliary winding.

Pin Description: NCP1014AP060G Pin Definition and Functions
Pin Name Type Function
1 VCC Power Supply voltage — decoupled with external capacitor (self-supplied)
2 GND Power Ground reference — connected to source of internal MOSFET
3 FB/CS Input Feedback input — accepts optocoupler signal to set peak current
4 Drain Power Internal 700V MOSFET drain — connects to transformer primary
Application Scenarios: In which products and applications is NCP1014AP060G used
  • Compact AC-DC wall adapters up to 10W for consumer electronics
  • Standby power supplies in TVs, monitors, and appliances
  • Smart electricity meter power supplies with low standby requirement
  • IoT device offline power converters
  • Industrial sensor auxiliary power rails
Alternative Models: What chips are recommended as replacements for NCP1014AP060G
Manufacturer Part Number Package Notes
onsemi NCP1014AP100G SOT-223 100 kHz variant
onsemi NCP1014AP133G SOT-223 133 kHz variant
Power Integrations LNK304DG DIP-8/SMD-8 Non-isolated buck regulator alternative
onsemi NCP1200D060R2G SOIC-8 Controller-only version (external MOSFET)
STMicroelectronics VIPer06XS SSO-10 600V integrated, comparable power

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1