Opens in a new tab

NCP1117DT33T5G

3.3V 1A LDO, 1.2V dropout, DPAK-3, AEC-Q100, automotive grade

6342

Effective Inventory

Image for reference only

Manufacturer Part:

NCP1117DT33T5G

Package:

DPAK-3 / TO-252-3 (6.6 x 6.0 x 2.3mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NCP1117DT33T5G from onsemi is a 3.3V fixed-output LDO voltage regulator capable of delivering up to 1A output current. With a dropout voltage of 1.2V at 800mA and internal current limiting, it is available in a DPAK-3 surface-mount package suitable for industrial applications.

Key Specifications

Output Voltage 3.3V (fixed, +/-1%)
Output Current 1A (max)
Input Voltage Range 4.5V to 20V
Dropout Voltage 1.2V at 800mA
Line Regulation 0.2% (typical)
Load Regulation 0.2% (typical)
Quiescent Current 5 mA (typical)
Operating Temperature -40 to 125 C
Package DPAK-3 (TO-252-3)

Features

  • 1A output current in surface-mount DPAK package
  • Internal current limiting and thermal shutdown
  • +/-1% output voltage accuracy
  • No minimum load requirement
  • AEC-Q100 qualified for automotive use

Applications

  • 3.3V MCU and FPGA power supplies
  • Post-regulation for switching converters
  • Automotive ECU 3.3V rails
  • Industrial control system regulation
  • Battery charger regulation
Product Introduction: NCP1117DT33T5G Product Introduction

The NCP1117DT33T5G from onsemi is a 3.3V fixed-output low-dropout linear voltage regulator from the NCP1117 series. Capable of delivering up to 1A, it features a dropout voltage of 1.2V at 800mA load and +/-1% output voltage accuracy. The internal current limiting and thermal shutdown provide robust protection. AEC-Q100 qualified, it is suitable for automotive ECU power supplies. The DPAK-3 surface-mount package offers excellent thermal dissipation for 1A output in a compact footprint.

Working Principle: NCP1117DT33T5G Working Principle

The NCP1117DT33T5G operates as a series linear voltage regulator with PNP pass transistor. **Reference Subsystem**: A trimmed bandgap reference provides the stable 3.3V output with +/-1% accuracy over temperature and line/load variations. **Error Amplifier**: A differential amplifier compares the output voltage against the internal reference. The error signal drives the PNP pass transistor to maintain regulation. **Pass Transistor**: The PNP pass element enables low dropout operation (1.2V at 800mA) compared to NPN-based designs. At 1A output, the device dissipates significant power (PD = (VIN-VOUT) x IOUT), requiring proper PCB thermal design. **Protection Subsystem**: Current limiting restricts output current to approximately 1.2A during overload. Thermal shutdown activates when junction temperature exceeds approximately 155C, cycling on and off until the fault is removed. **Stability**: A minimum 10uF output capacitor is required for stability. Tantalum or low-ESR ceramic capacitors ensure proper phase margin in the feedback loop.

Pin Description: NCP1117DT33T5G Pin Definition and Functions
Pin Name Description
1 GND/ADJ Ground (fixed voltage version)
2 VOUT Regulated 3.3V output (connected to tab)
3 VIN Unregulated input voltage (4.5V to 20V)
Tab VOUT Thermal tab, electrically connected to VOUT (Pin 2)
Application Scenarios: In which products and applications is NCP1117DT33T5G used
  • Automotive ECU: Regulating 5V vehicle supply to 3.3V for MCU and CAN transceiver power
  • FPGA Power: Clean 3.3V I/O supply for Lattice and Xilinx FPGAs from 5V input
  • Industrial Control: Post-regulation of 5V switching supply to low-noise 3.3V
  • Battery Devices: Regulating Li-ion battery (4.2V) to 3.3V for IoT and sensor nodes
  • Communication: 3.3V rail for Ethernet PHY and RS-485 transceiver circuits
Alternative Models: What chips are recommended as replacements for NCP1117DT33T5G
Model Manufacturer Key Difference
LM1117DT-3.3 TI Pin-compatible, 800mA, DPAK
AMS1117-3.3 AMS 1A, 1.1V dropout, SOT-223
LD1117DT33TR ST 800mA, 1.1V dropout, DPAK
NCV1117DT33T5G onsemi Automotive PPAP version, same specs
AP1117D33LI-TRG Diodes Inc 1A, 1.2V dropout, DPAK, low ESR stable

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1