Opens in a new tab

NCP1200D060R2G

PWM current-mode controller, 60kHz fixed, self-supplied, skip-cycle, 250mA drive, SOIC-8

6543

Effective Inventory

Image for reference only

Manufacturer Part:

NCP1200D060R2G

Package:

SOIC-8 5.0 x 4.0 x 1.5 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The onsemi NCP1200D060R2G is a PWM current-mode controller designed for low-power universal off-line SMPS, operating at a fixed 60 kHz switching frequency. Housed in an SOIC-8 package, it features skip-cycle capability for excellent light-load efficiency, self-supply operation from the DC rail, and internal leading-edge blanking — combining compact design with robust protection for AC-DC adapters and battery chargers.

Key Specifications

Control Mode Current Mode PWM
Switching Frequency 60 kHz (Fixed)
Peak Drive Current 250 mA Source/Sink
UVLO Threshold 12V (On), 10V (Off)
Operating Temperature -40°C to +125°C
Package SOIC-8

Features

  • No auxiliary winding required — self-supplied from DC rail via HV pin
  • Internal output short-circuit protection
  • Extremely low no-load standby power consumption
  • Current-mode control with skip-cycle capability for light-load efficiency
  • Internal leading-edge blanking (LEB) eliminates external filtering
  • 250 mA peak current source/sink drive capability
  • Built-in frequency jittering for reduced EMI
  • Internal temperature shutdown protection
  • Pb-Free, Halogen Free/BFR Free, RoHS compliant

Applications

  • AC-DC wall adapters and chargers
  • Offline battery chargers
  • Standby power supplies for consumer electronics
  • Low-cost SMPS for auxiliary power rails
  • Smart meter auxiliary power
Product Introduction: NCP1200D060R2G Product Introduction

The onsemi NCP1200D060R2G is a PWM current-mode controller designed for low-power universal off-line switch-mode power supplies. Operating at a fixed 60 kHz switching frequency, it enables implementation of complete offline battery chargers or standby SMPS with minimal external components. The device is self-supplied from the DC rail through the HV pin, eliminating the need for an auxiliary winding on the transformer. When output power demand decreases, the controller automatically enters skip-cycle mode at low peak current, providing excellent light-load efficiency without acoustic noise. Internal leading-edge blanking (LEB) simplifies current sensing by eliminating external RC filtering. Built-in frequency jittering spreads EMI energy for easier compliance. The device features internal short-circuit protection and temperature shutdown.

Working Principle: NCP1200D060R2G Working Principle

The NCP1200D060R2G implements current-mode PWM control at 60 kHz fixed frequency. The feedback pin (FB) receives the error signal from an optocoupler, setting the peak current setpoint. The current sense (CS) pin monitors the primary current through a sense resistor. Internal LEB suppresses the initial turn-on current spike. The PWM comparator compares the sensed current ramp with the error signal, terminating the switch on-time when current reaches the setpoint. When load decreases and FB voltage falls below a threshold, skip-cycle mode gates off switching pulses until output drops enough for the next burst. The HV pin connects to the DC bus through an internal startup current source that charges VCC. Once VCC reaches UVLO threshold, switching begins and self-supply maintains operation. Frequency jittering modulates switching frequency slightly to spread EMI.

Pin Description: NCP1200D060R2G Pin Definition and Functions
Pin Name Type Function
1 Adj Input Skip-cycle peak current adjustment
2 FB Input Feedback input — accepts optocoupler signal
3 CS Input Current sense input — monitors primary current
4 GND Power IC ground
5 Drv Output Gate drive output — drives external MOSFET or IGBT
6 VCC Power Supply voltage — decoupled with external capacitor
7 NC NC No connection
8 HV Power High-voltage input — connects to DC rail for self-supply
Application Scenarios: In which products and applications is NCP1200D060R2G used
  • Low-cost AC-DC wall adapters for consumer electronics (5W-15W)
  • Offline battery chargers for mobile devices
  • Standby power supplies in TVs, set-top boxes, and appliances
  • Auxiliary power rails in industrial control systems
  • Smart meter and IoT device power supplies
Alternative Models: What chips are recommended as replacements for NCP1200D060R2G
Manufacturer Part Number Package Notes
onsemi NCP1200D100R2G SOIC-8 100 kHz frequency variant
onsemi NCP1200D040R2G SOIC-8 40 kHz frequency variant
Power Integrations TNY274PN DIP-8 Integrated MOSFET alternative
onsemi NCP1014AP060G SOT-223 Integrated MOSFET, similar power
STMicroelectronics VIPer12A SO-8 Integrated MOSFET alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1