Opens in a new tab

NCP1200D100R2G

PWM current-mode controller, 100kHz fixed, self-supplied, skip-cycle, 250mA drive, SOIC-8

7892

Effective Inventory

Image for reference only

Manufacturer Part:

NCP1200D100R2G

Package:

SOIC-8 5.0 x 4.0 x 1.5 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The onsemi NCP1200D100R2G is a PWM current-mode controller designed for low-power universal off-line switch-mode power supplies (SMPS). Housed in an SOIC-8 package, it operates at a fixed switching frequency of 100 kHz and features skip-cycle capability for excellent light-load efficiency, internal leading-edge blanking, and self-supply operation from the DC rail — eliminating the need for an auxiliary winding.

Key Specifications

Control Mode Current Mode PWM
Switching Frequency 100 kHz (Fixed)
Peak Drive Current 250 mA Source/Sink
Supply Voltage (VCC) Self-supplied from DC rail
UVLO Threshold 12V (On), 10V (Off)
Operating Temperature -40°C to +125°C
Package SOIC-8

Features

  • No auxiliary winding required — self-supplied from the DC rail via HV pin
  • Internal output short-circuit protection
  • Extremely low no-load standby power consumption
  • Current-mode control with skip-cycle capability for light-load efficiency
  • Internal leading-edge blanking (LEB) eliminates need for external filtering
  • 250 mA peak current source/sink drive capability
  • Built-in frequency jittering for reduced EMI
  • Internal temperature shutdown protection
  • Pb-Free, Halogen Free/BFR Free, RoHS compliant

Applications

  • AC-DC wall adapters and chargers
  • Offline battery chargers
  • Standby power supplies for consumer electronics
  • Low-cost SMPS for auxiliary power rails
  • Industrial control auxiliary supplies
Product Introduction: NCP1200D100R2G Product Introduction

The onsemi NCP1200D100R2G represents a major advance in ultra-compact switch-mode power supply design. Housed in an SOIC-8 package, this PWM current-mode controller allows implementation of a complete offline battery charger or standby SMPS with minimal external components. The device operates at a fixed 100 kHz switching frequency and drives low gate-charge switching devices such as IGBTs or MOSFETs. A key innovation is the self-supply feature — the IC is powered directly from the DC rail through the HV pin, eliminating the need for an auxiliary winding on the transformer. This ensures operation even under low output voltage or short-circuit conditions. When the output power demand diminishes, the controller automatically enters skip-cycle mode at low peak current, providing excellent light-load efficiency without acoustic noise. Internal leading-edge blanking (LEB) simplifies the current sensing circuit by eliminating the need for external RC filtering.

Working Principle: NCP1200D100R2G Working Principle

The NCP1200D100R2G implements current-mode PWM control. The feedback pin (FB) receives the error signal from an optocoupler, which sets the peak current setpoint. The current sense (CS) pin monitors the primary current through a sense resistor. An internal leading-edge blanking circuit suppresses the initial current spike at switch turn-on, eliminating false tripping. The PWM comparator compares the sensed current ramp with the error signal, terminating the switch on-time when the current reaches the setpoint. When the load decreases and the FB voltage falls below a threshold, the controller enters skip-cycle mode — gating off switching pulses until the output drops enough to require the next burst. This skip-cycle operation occurs at low peak current, avoiding transformer acoustic noise. The HV pin connects to the rectified DC bus through an internal startup current source that charges the VCC capacitor. Once VCC reaches the UVLO threshold, the controller starts switching and maintains VCC through the self-supply mechanism. Internal frequency jittering modulates the switching frequency slightly to spread EMI energy across a wider band.

Pin Description: NCP1200D100R2G Pin Definition and Functions
Pin Name Type Function
1 Adj Input Skip-cycle peak current adjustment
2 FB Input Feedback input — accepts optocoupler signal to set peak current
3 CS Input Current sense input — monitors primary current via sense resistor
4 GND Power IC ground
5 Drv Output Gate drive output — drives external MOSFET or IGBT
6 VCC Power Supply voltage — decoupled with external capacitor
7 NC NC No connection
8 HV Power High-voltage input — connects to DC rail for self-supply startup
Application Scenarios: In which products and applications is NCP1200D100R2G used
  • Low-cost AC-DC wall adapters for consumer electronics (5W-15W)
  • Offline battery chargers for mobile phones and portable devices
  • Standby power supplies in TVs, set-top boxes, and appliances
  • Auxiliary power rails in industrial control systems
  • Smart meter and IoT device power supplies
Alternative Models: What chips are recommended as replacements for NCP1200D100R2G
Manufacturer Part Number Package Notes
onsemi NCP1200D060R2G SOIC-8 60 kHz frequency variant
onsemi NCP1200D040R2G SOIC-8 40 kHz frequency variant
Power Integrations TNY274PN DIP-8 Integrated MOSFET alternative
onsemi NCP1014AP100G SOT-223 Integrated MOSFET, similar power range
STMicroelectronics VIPer12A SO-8 Integrated MOSFET alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1