Opens in a new tab

NCP303LSN30T1G

CMOS voltage detector, 3.0V, +/-1.5%, 0.5uA, TSOP-5

30000

Effective Inventory

Image for reference only

Manufacturer Part:

NCP303LSN30T1G

Package:

TSOP-5 SOT-23-5 (2.90 x 1.60 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NCP303LSN30T1G from onsemi is a CMOS voltage detector with 3.0V threshold, active-low open-drain output, and 0.5uA IQ in TSOP-5.

Key Specifications

Detect Voltage VDET 3.0V
Accuracy +/-1.5%
Supply Current 0.5 uA typical
Output Type N-ch open drain (active low)
Hysteresis VDET x 3-6%
Operating Voltage 0.7V to 10V
Package TSOP-5 (SOT-23-5)
Operating Temperature -40 to +85 C

Features

  • +/-1.5% detection accuracy
  • 0.5uA ultra-low current consumption
  • Active-low open-drain reset output
  • Built-in hysteresis prevents chattering
  • No external components needed

Applications

  • MCU reset and power-on reset
  • Battery voltage monitoring
  • System brownout detection
  • Power supply supervision
Product Introduction: NCP303LSN30T1G Product Introduction

The NCP303LSN30T1G from onsemi is a CMOS voltage detector IC with 3.0V threshold in TSOP-5 (SOT-23-5) package. The LS suffix denotes active-low open-drain output. The 3.0V threshold (N30) is ideal for monitoring 3.3V power rails, detecting when voltage drops below the 3.0V threshold. The +/-1.5% detection accuracy ensures reliable reset thresholds. The 0.5uA supply current is among the lowest available, making it ideal for battery-powered always-on monitoring. Built-in hysteresis (3-6% of VDET) prevents output oscillation.

Working Principle: NCP303LSN30T1G Working Principle

The NCP303LSN30T1G operates as a CMOS voltage detector. (1) The input voltage is compared against an internal precision reference. When VDD drops below 3.0V, the output transistor turns off and the open-drain output goes high (via external pull-up), asserting the active-low reset signal. (2) The built-in hysteresis ensures that VDD must rise by 3-6% above 3.0V before the output de-asserts. This prevents chattering when VDD hovers near the threshold, which could cause erratic MCU reset behavior. (3) The 0.5uA supply current allows the detector to remain powered continuously without significantly impacting battery life. The operating voltage range of 0.7V to 10V covers most system rails. The detector is fully specified down to 0.7V, meaning the reset output remains asserted even when the supply collapses to very low levels.

Pin Description: NCP303LSN30T1G Pin Definition and Functions
Pin Name Description
1 VOUT Reset output; active-low open-drain, asserts low when VCC drops below threshold (3.0 V typ)
2 GND Ground reference
3 VCC Supply voltage (1.0 V to 5.5 V); internal pull-up to VCC through 50 kOhm resistor

Package: TSOT-23-3. Threshold voltage: 3.0 V (suffix 30). Supply current: 0.5 uA typical. Reset output remains valid for VCC down to 1.0 V.

Application Scenarios: In which products and applications is NCP303LSN30T1G used
  • MCU Brownout Reset: Holding 3.3 V microcontroller in reset when supply drops below 3.0 V threshold, preventing erratic code execution and flash corruption
  • Battery Voltage Monitoring: Ultra-low 0.5 uA supply current enables continuous battery voltage surveillance in always-on energy-harvesting systems
  • System Power-On Reset: Generating a clean reset pulse during power-up without external RC components; 240 ms typical timeout when used with external capacitor on VCC
  • PLC and Industrial Logic Reset: Monitoring 3.3 V logic rails in programmable logic controllers with built-in hysteresis preventing chattering on slow voltage ramps
  • Portable Medical Devices: Ensuring safe microcontroller shutdown in battery-powered blood glucose meters and pulse oximeters when battery voltage decays below threshold
Alternative Models: What chips are recommended as replacements for NCP303LSN30T1G
Model Manufacturer Key Difference Package Threshold
NCP303LSN33T1G onsemi 3.3V threshold version for standard 3.3V MCU power rails with same 0.5uA Iq TSOT-23-3 3.3V
NCP303LSN25T1G onsemi 2.5V threshold version for lower-voltage 2.5V logic supply monitoring TSOT-23-3 2.5V
BD48K30G-TR ROHM 3.0V threshold with CMOS push-pull output and SSOP5 package, 2.4uA Iq SSOP-5 3.0V
TPS3809K33DBVR TI 3.3V threshold supervisor in SOT-23-5 with 2.5uA Iq and manual reset input SOT-23-5 3.3V
MCP131T-300I/TT Microchip 3.0V threshold with open-drain reset output and 1uA Iq in tiny SOT-23-3 SOT-23-3 3.0V
MAX809TTRG onsemi 3.08V threshold active-low reset in SOT-23-3, 250mA reset output sink current SOT-23-3 3.08V

The NCP303LSN30T1G is an ultra-low 0.5uA voltage detector with 3.0V threshold and active-low open-drain output. Other threshold voltages in the NCP303 family range from 0.9V to 5.0V. For push-pull output, use BD48K series from ROHM. For additional features like manual reset, consider TPS3809.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1