Opens in a new tab

NCS20072DR2G

Dual CMOS op-amp, 3MHz GBW, 2.7-36V, R-R output, 5pA Ibias, SOIC-8

14149

Effective Inventory

Image for reference only

Manufacturer Part:

NCS20072DR2G

Package:

SOIC-8 (3.9 x 4.9 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NCS20072DR2G from onsemi is a dual CMOS operational amplifier featuring rail-to-rail output, 3 MHz gain bandwidth, and a wide supply voltage range of 2.7V to 36V in an SOIC-8 package. With only 405 uA quiescent current per channel and 5 pA input bias current, it is ideal for battery-powered and high-impedance sensor interface applications across industrial and automotive systems.

Key Specifications

Channels 2 (dual)
Supply Voltage Range 2.7V to 36V (single) or +/-1.35V to +/-18V (split)
Gain Bandwidth Product 3 MHz typ
Slew Rate 2.4 V/us typ
Input Offset Voltage 1.3 mV typ
Input Bias Current 5 pA typ
Quiescent Current 405 uA per channel typ
Output Current 70 mA sink / 50 mA source
CMRR 110 dB typ
Operating Temperature -40°C to +125°C
Package SOIC-8 (3.9 x 4.9 mm)

Features

  • Rail-to-rail output maximizes dynamic range
  • Wide supply range from 2.7V to 36V
  • Ultra-low input bias current (5 pA) for high-Z sensors
  • Low quiescent current (405 uA/channel) for battery applications
  • PSRR of 135 dB typ for noisy supply environments
  • NCV prefix variants AEC-Q100 qualified for automotive

Applications

  • Current sensing and signal conditioning
  • Automotive sensor interfaces
  • Notebook and portable instrument power supplies
  • Battery-powered monitoring circuits
  • High-impedance transducer amplifiers
Product Introduction: NCS20072DR2G Product Introduction

The onsemi NCS20072DR2G is a dual CMOS operational amplifier from the NCx2007x series providing rail-to-rail output operation, 3 MHz bandwidth, and wide supply voltage range from 2.7V to 36V. In a compact SOIC-8 package, it delivers a slew rate of 2.4 V/us while consuming only 405 uA quiescent current per channel. The CMOS input stage provides extremely low input bias current of 5 pA typical, making it ideal for interfacing with high-impedance signal sources such as piezoelectric sensors, photodiodes, and pH probes. The device achieves 110 dB CMRR and 135 dB PSRR, ensuring robust performance in noisy environments. Automotive-qualified variants are available under the NCV20072 prefix.

Working Principle: NCS20072DR2G Working Principle

The NCS20072DR2G uses a CMOS input stage followed by a folded-cascode gain stage and a rail-to-rail output stage. The CMOS input provides picoampere-level bias currents, enabling direct connection to high-impedance sensors without loading the signal source. The internal compensation ensures stability with capacitive loads up to several hundred picofarads. The rail-to-rail output stage uses complementary PMOS and NMOS transistors to swing within millivolts of both supply rails, maximizing the usable output voltage range. The 3 MHz gain-bandwidth product provides adequate loop bandwidth for most signal conditioning applications, while the 2.4 V/us slew rate ensures faithful reproduction of transient signals. The wide supply range allows operation from a single lithium cell to industrial 24V or 36V rails.

Pin Description: NCS20072DR2G Pin Definition and Functions
Pin Name Description
1 1OUT Channel 1 Output
2 1IN- Channel 1 Inverting Input
3 1IN+ Channel 1 Non-Inverting Input
4 VSS/GND Negative Supply or Ground
5 2IN+ Channel 2 Non-Inverting Input
6 2IN- Channel 2 Inverting Input
7 2OUT Channel 2 Output
8 VDD Positive Supply (2.7-36V)
Application Scenarios: In which products and applications is NCS20072DR2G used
  • Current Sensing: High-side and low-side current measurement with 36V supply capability and 110 dB CMRR rejecting common-mode bus voltage
  • Automotive Sensors: NCV-qualified variants for engine management, fuel level, and battery monitoring in 12V/24V vehicle systems
  • Portable Instruments: 405 uA per channel from a 2.7V supply enables long battery life in handheld measurement tools
  • Photodiode Amplifiers: 5 pA input bias current minimizes dark current error in transimpedance amplifier configurations
  • Industrial Signal Conditioning: 135 dB PSRR ensures clean output in electrically noisy factory environments with switching loads
Alternative Models: What chips are recommended as replacements for NCS20072DR2G
Model Brand GBW (MHz) Vs Range (V) Iq/ch (uA)
MCP6002-I/SN Microchip 1 1.8-6 100
LM358DR TI 1.1 3-32 500
TSV912IDT ST 8 2.5-5.5 950
TLV9152DR TI 4.5 2.7-24 560
NCV20072DR2G onsemi 3 2.7-36 405

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1