Opens in a new tab

NCS2250SN2T1G

High-speed R-R comparator, 50ns, 1.8-5.5V, push-pull, SOT-23-5

11685

Effective Inventory

Image for reference only

Manufacturer Part:

NCS2250SN2T1G

Package:

5-Pin SOT-23 / TSOP-5 (2.9 x 1.6 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NCS2250SN2T1G is an onsemi high-speed rail-to-rail comparator with 50ns propagation delay, 1.8V-5.5V supply, 150uA supply current, push-pull output, and 6mV max offset voltage. Packaged in SOT-23-5, -40C to +125C. AEC-Q100 qualified.

Key Specifications

Propagation Delay 50 ns (100mV overdrive)
Supply Voltage 1.8 V to 5.5 V
Supply Current 150 uA typ at 5V
Input Offset Voltage 6 mV max
Input Common Mode Rail-to-rail (VSS-0.2V to VDD+0.2V)
Output Type Push-pull
Package SOT-23-5 (TSOP-5)

Features

  • 50ns propagation delay with 100mV overdrive
  • Rail-to-rail input (200mV beyond rails)
  • 1.8V to 5.5V supply voltage range
  • 150uA typical supply current at 5V
  • Push-pull output stage
  • AEC-Q100 qualified
  • 6mV max input offset voltage
  • 88dB PSRR, 81dB CMRR

Applications

  • Voltage threshold detection
  • Zero-crossing detectors
  • High-speed sampling circuits
  • Clock and data signal restoration
Product Introduction: NCS2250SN2T1G Product Introduction

The NCS2250SN2T1G is an onsemi high-speed low-voltage comparator in a SOT-23-5 package with rail-to-rail input and push-pull output. The 50ns propagation delay at 100mV overdrive makes it suitable for high-speed sampling circuits and timing-critical applications. The rail-to-rail input extends 200mV beyond both supply rails, allowing voltage sensing at ground or at the supply voltage without requiring level shifting. The 1.8V to 5.5V supply range supports operation from low-voltage logic rails. The push-pull output provides active drive in both directions without requiring an external pull-up resistor, making it faster than open-drain alternatives for capacitive loads. The 150uA typical supply current at 5V is low enough for battery-powered applications. The AEC-Q100 qualification (NCV2250 variants) supports automotive applications. The 6mV maximum input offset voltage and 88dB PSRR / 81dB CMRR ensure accurate threshold detection even in noisy environments.

Working Principle: NCS2250SN2T1G Working Principle

The NCS2250SN2T1G uses a CMOS comparator architecture with a rail-to-rail input stage. The input stage consists of complementary N-channel and P-channel differential pairs that cover the entire common-mode voltage range from VSS-200mV to VDD+200mV. The differential input voltage is amplified by the gain stages and drives the push-pull CMOS output stage. When the non-inverting input exceeds the inverting input by more than the offset voltage, the output drives to VDD (logic high). When the inverting input exceeds the non-inverting input, the output drives to VSS (logic low). The push-pull output stage provides active sourcing and sinking, resulting in fast output transitions (typical 50ns propagation delay at 100mV overdrive). The 150uA supply current is consumed continuously while the comparator is active, regardless of the output state.

Pin Description: NCS2250SN2T1G Pin Definition and Functions
Pin Mnemonic Description
1 VOUT Push-pull output
2 VSS Negative supply (ground)
3 IN+ Non-inverting input
4 IN- Inverting input
5 VDD Positive supply
Application Scenarios: In which products and applications is NCS2250SN2T1G used
  • Zero-crossing detector for AC mains with 50ns response enabling precise thyristor triggering
  • Battery voltage threshold detector at 1.8V supply with rail-to-rail input sensing ground-referenced divider
  • High-speed sampling circuit with push-pull output driving 5V logic at 50ns propagation delay
  • Automotive LED driver current limit comparator with AEC-Q100 qualification
Alternative Models: What chips are recommended as replacements for NCS2250SN2T1G
Model Manufacturer Key Difference
NCV2250SN2T1G onsemi AEC-Q100 qualified version
NCS2252SN2T1G onsemi Open-drain output version
TLV3201DBVR TI 40ns, SOT-23-5, push-pull
LTC6702CDC ADI 18ns, SOT-23-5, push-pull

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1