Opens in a new tab

NCV4274CST33T3G

Automotive 200mA LDO, 3.3V fixed, 5.5-40V input, ±2%, AEC-Q100, SOT-223, reverse-polarity prot

7890

Effective Inventory

Image for reference only

Manufacturer Part:

NCV4274CST33T3G

Package:

SOT-223 (6.5 x 3.5 x 1.5mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The NCV4274CST33T3G is an automotive-grade 200mA LDO voltage regulator from onsemi, providing a fixed 3.3V output from up to 40V input. Designed for harsh automotive environments, it features ±2% output accuracy, 60dB PSRR at 1kHz, and comprehensive protection including overcurrent, overtemperature, and reverse-polarity. The NCV prefix denotes AEC-Q100 qualification, making it suitable for under-hood and safety-critical automotive applications.

Key Specifications

Output Type Fixed 3.3V
Output Current 200mA
Input Voltage Range 5.5V to 40V
Dropout Voltage 600mV @ 200mA (typical)
Output Accuracy ±2% over load, line, and temperature
PSRR 60dB @ 1kHz
Quiescent Current 80µA (typical)
Noise 100µVrms (10Hz-100kHz)
Enable Pin Yes (active high)
Protection Overcurrent, overtemperature, reverse-polarity
Package SOT-223 (6.5 x 3.5mm)
Operating Temperature -40°C to +150°C (junction)
Qualification AEC-Q100, PPAP capable

Features

  • AEC-Q100 qualified for automotive applications
  • Wide input range: 5.5V to 40V (survives load-dump)
  • Fixed 3.3V output with ±2% accuracy
  • 200mA output current capability
  • Low quiescent current: 80µA
  • Enable pin for power sequencing
  • Reverse-polarity protection up to -42V
  • Overcurrent and thermal shutdown protection
  • Stable with ceramic output capacitors (1µF min)
  • PPAP capable for automotive production

Applications

  • Automotive ECU power supplies
  • Sensor and transceiver 3.3V rails
  • Body electronics and lighting controllers
  • Infotainment and telematics modules
  • Battery-powered automotive systems
  • Industrial 24V bus-powered applications
Product Introduction: NCV4274CST33T3G Product Introduction

The NCV4274CST33T3G is an automotive-qualified 200mA low-dropout linear regulator from onsemi, providing a fixed 3.3V output from input voltages up to 40V. The NCV prefix confirms AEC-Q100 qualification and PPAP capability, making it suitable for production automotive applications. The device features ±2% output voltage accuracy over the full automotive temperature range, 60dB PSRR at 1kHz for clean power rails, and comprehensive protection against overcurrent, overtemperature, and reverse-polarity conditions (up to -42V). The enable pin allows power sequencing and reduces standby current to below 1µA when disabled. The SOT-223 package provides good thermal performance in compact footprints.

Working Principle: NCV4274CST33T3G Working Principle

The NCV4274 is a PNP pass-transistor LDO that regulates the output voltage by controlling the base drive of a PNP power transistor. The feedback network compares a fraction of the output voltage against an internal bandgap reference. When the output drops below the target 3.3V, the error amplifier increases the PNP base current, allowing more current to flow from input to output. The low 80µA quiescent current is achieved by careful biasing of the control circuitry. The enable pin gates the internal bias; when EN is low, all internal circuits are disabled, reducing supply current to below 1µA. Overcurrent protection limits the PNP base drive when the output current exceeds approximately 400mA. Thermal shutdown activates at 175°C junction temperature, turning off the pass transistor to prevent damage. Reverse-polarity protection uses a parasitic body diode clamp to safely handle negative input voltages up to -42V.

Pin Description: NCV4274CST33T3G Pin Definition and Functions
Pin Name Description
1 EN Enable input (active high, internal pull-up)
2 VIN Input supply (5.5V to 40V)
3 GND Ground
4 VOUT Regulated 3.3V output
Tab VOUT Output (connected to pin 4, thermal tab)
Application Scenarios: In which products and applications is NCV4274CST33T3G used
  • Automotive ECU 3.3V Supply: Power the 3.3V digital rail of an automotive ECU directly from the 12V battery bus. The 40V maximum input survives load-dump transients (up to 40V) without external transient suppression. The enable pin connects to the ECU’s ignition signal for power sequencing. A single 1µF ceramic capacitor on the output ensures stability.
  • CAN Transceiver Power: Supply a 3.3V CAN transceiver from the vehicle’s 12V bus. The 60dB PSRR rejects alternator ripple and switching noise from other ECUs, providing a clean supply for the transceiver’s reference voltage. Reverse-polarity protection handles battery connection faults.
  • Industrial 24V Bus: Use in industrial automation equipment powered from 24V DC bus systems. The wide input range (up to 40V) accommodates the 24V ±20% tolerance common in industrial environments. The low 80µA quiescent current minimizes standby power consumption in always-on systems.
Alternative Models: What chips are recommended as replacements for NCV4274CST33T3G
Model Voltage Current Package Key Difference
NCV4274CST50T3G 5.0V 200mA SOT-223 5.0V version
NCV4275 Adj. 200mA SOT-223 Adjustable output version
TLV74333PDBVR 3.3V 150mA SOT-23-5 TI, smaller package, lower current
TLE4274SV33 3.3V 200mA TO-252 Infineon alternative, DPAK

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1