Opens in a new tab

NCV887302D1R2G

Non-synchronous boost controller, 2.5V-40V input, DFN-8, AEC-Q100 Grade 1

8500

Effective Inventory

Image for reference only

Manufacturer Part:

NCV887302D1R2G

Package:

DFN-8 (4 x 4 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NCV887302D1R2G is a non-synchronous boost controller from onsemi’s automotive-qualified NCV series, designed for DC-DC power conversion with 2.5V to 40V input voltage range in a DFN-8 surface-mount package. AEC-Q100 Grade 1 qualified, it provides robust boost conversion for automotive applications including LED lighting, battery-powered systems, and industrial power supplies.

Key Specifications

Type Non-Synchronous Boost Controller
Input Voltage Range 2.5V to 40V
Output Voltage Adjustable (boost topology)
Switching Frequency Programmable
Package DFN-8 (4 x 4 mm)
Operating Temperature -40°C to +150°C
Qualification AEC-Q100 Grade 1
EU RoHS Compliant

Features

  • AEC-Q100 Grade 1 automotive qualified (-40°C to +150°C)
  • Wide 2.5V to 40V input voltage range
  • Non-synchronous boost controller topology
  • External MOSFET driver for design flexibility
  • Comprehensive protection features

Applications

  • Automotive LED headlight boost supply
  • Battery-powered boost converters
  • Industrial 12V/24V to higher voltage conversion
  • Automotive infotainment power supply
Product Introduction: NCV887302D1R2G Product Introduction

The NCV887302D1R2G is a non-synchronous boost controller from onsemi’s automotive-qualified NCV series, designed for DC-DC power conversion with 2.5V to 40V input voltage range in a DFN-8 surface-mount package. AEC-Q100 Grade 1 qualified for the full automotive temperature range (-40°C to +150°C), it provides robust boost conversion for automotive applications including LED lighting, battery-powered systems, and industrial power supplies. The non-synchronous topology uses an external diode and MOSFET, offering design flexibility for optimization of efficiency and cost.

Working Principle: NCV887302D1R2G Working Principle

The NCV887302D1R2G operates as a non-synchronous boost controller:

1. Boost Topology: The controller drives an external N-Channel MOSFET in a boost converter configuration. When the MOSFET is ON, current flows through the inductor storing energy. When the MOSFET turns OFF, the inductor voltage adds to the input voltage, forcing current through the external diode to the output capacitor and load.

2. Voltage Mode Control: The controller uses voltage-mode PWM control with adjustable switching frequency. An external voltage divider sets the output voltage through the feedback pin.

3. Protection Features: Built-in overcurrent protection (OCP), overvoltage protection (OVP), and thermal shutdown protect the circuit under fault conditions. The wide input range (2.5V-40V) handles automotive load dump transients.

4. AEC-Q100 Grade 1: Qualified for the most demanding automotive environment, operating reliably at junction temperatures up to 150°C.

Pin Description: NCV887302D1R2G Pin Definition and Functions
Pin Name Type Function
1 EN/UVLO Input Enable and undervoltage lockout programming
2 FB Input Feedback voltage input for output regulation
3 COMP I/O External compensation network connection
4 GND Power Ground reference
5 GATE Output Gate driver output for external N-Channel MOSFET
6 VCC Power Internal regulator output, bypass with capacitor
7 CS Input Current sense input for overcurrent protection
8 VIN Power Input voltage supply (2.5V to 40V)

Note: DFN-8 package has exposed thermal pad on the bottom for heat dissipation. The pad must be soldered to the PCB ground plane for proper thermal management.

Application Scenarios: In which products and applications is NCV887302D1R2G used
Application Circuit Role Key Requirement
Automotive LED Boost supply for LED headlight strings 2.5V-40V input, AEC-Q100
Battery System 12V to 24V/48V boost conversion Wide input range, robust OCP
Industrial Power 24V bus to higher voltage conversion 40V max input, DFN-8
Infotainment Display backlight power supply AEC-Q100 Grade 1, -40°C to +150°C
Solar Power Low voltage panel boost converter 2.5V min input, adjustable output
Alternative Models: What chips are recommended as replacements for NCV887302D1R2G
Manufacturer Part Number Package Key Specs Notes
TI LM51561QDRCR VQFN-10 Boost, 2.5-40V, AEC-Q100 Similar functionality
Diodes Inc AL8860Q SO-8 Boost, 5-40V, AEC-Q100 Similar input range
Maxim MAX20416ATIA/VY+ TQFN Boost, 3-36V, AEC-Q100 Similar functionality
onsemi NCV887300D1R2G DFN-8 Boost, 3.2-40V, AEC-Q100 Lower voltage variant
Richtek RT8580Q DFN-10 Boost, 4.5-36V, AEC-Q100 Similar application

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1