Opens in a new tab

NT3H2211W0FTTJ

NTAG I2C Plus 2K NFC tag, ISO 14443A, 2KB EEPROM, 64B SRAM, I2C 400kHz, energy harvesting, TSSOP8

4183

Effective Inventory

Image for reference only

Manufacturer Part:

NT3H2211W0FTTJ

Package:

TSSOP8 (SOT505-1) 4.9 x 3.0 x 1.1 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NXP NT3H2211W0FTTJ is an NTAG I2C Plus 2K NFC Forum Type 2 Tag with an I2C interface, password protection, and energy harvesting. It combines a passive NFC interface with a contact I2C interface in a TSSOP8 package, offering 2KB EEPROM and 64-byte SRAM for bidirectional data transfer between NFC and I2C.

Key Specifications

NFC Standard ISO/IEC 14443 Type A, NFC Forum T2T
User Memory 1912 bytes EEPROM
SRAM Buffer 64 bytes
I2C Interface Up to 400 kHz (slave)
NFC Data Rate 106 kbit/s
Operating Distance Up to 100 mm
Energy Harvesting Up to 15 mW
Input Capacitance 50 pF
Supply Voltage (VCC) 0.7 V to 3.6 V (I2C mode)
Operating Temperature -40°C to +105°C
Package TSSOP8 (SOT505-1)

Features

  • NFC Forum Type 2 Tag compliant with ISO/IEC 14443A
  • 2KB EEPROM with 64-byte SRAM for pass-through mode
  • Energy harvesting from NFC field (up to 15 mW)
  • 32-bit password protection for memory access
  • Elliptic Curve Cryptography (ECC) originality signature
  • Configurable field detection pin for device wake-up
  • Data retention: 20 years minimum, 500,000 write cycles
  • Backward compatible with first-generation NTAG I2C

Applications

  • Home automation and smart appliance pairing
  • Consumer electronics NFC tap-to-connect
  • IoT device configuration and commissioning
  • Industrial parameter tagging and diagnostics
  • Wearable device connectivity
Product Introduction: NT3H2211W0FTTJ Product Introduction

The NXP NT3H2211W0FTTJ is a second-generation connected NFC tag from the NTAG I2C Plus family, combining a passive NFC interface with a contact I2C interface in a compact TSSOP8 package. It features 2KB EEPROM (1912 bytes freely available user memory) and a 64-byte SRAM buffer for bidirectional data transfer between the NFC and I2C interfaces. The device maintains full backward compatibility with first-generation NTAG I2C while adding advanced features including 32-bit password protection, full memory-access configuration from both interfaces, and an ECC-based originality signature for cloning protection. It supports energy harvesting from the NFC field (up to 15 mW) to power external devices and features a configurable field detection pin for wake-up functionality. The device is NFC Forum Type 2 Tag certified (Certification ID: 58514).

Working Principle: NT3H2211W0FTTJ Working Principle

The NT3H2211W0FTTJ operates through two communication interfaces: an NFC interface (ISO/IEC 14443A at 106 kbit/s, powered by the NFC reader’s RF field) and an I2C slave interface (up to 400 kHz, powered by the host VCC). The 64-byte SRAM buffer enables pass-through mode for bidirectional data transfer between the two interfaces without writing to EEPROM. Memory arbitration ensures conflict-free access — when one interface is writing, the other is blocked via session registers. The energy harvesting feature extracts power from the NFC field to supply external circuitry via the VOUT pin. The field detection (FD) pin signals NFC field presence or data synchronization events to the host. Password protection (32-bit) restricts memory access from the NFC interface, while the I2C interface can independently configure access rights. The ECC originality signature provides authentication against cloning.

Pin Description: NT3H2211W0FTTJ Pin Definition and Functions
Pin Name Type Function
1 VCC Power Supply voltage for I2C interface (0.7-3.6V)
2 FD Output Field detection output (open-drain, configurable)
3 GND Power Ground
4 VOUT Output Energy harvesting output (for external load)
5 SDA I/O I2C-bus serial data
6 SCL Input I2C-bus serial clock
7 LA Antenna Antenna connection A
8 LB Antenna Antenna connection B
Application Scenarios: In which products and applications is NT3H2211W0FTTJ used
  • Home automation device pairing via NFC tap-to-connect
  • Smart appliance configuration and diagnostics
  • IoT device commissioning and parameter tagging
  • Wearable and consumer electronics NFC connectivity
  • Industrial sensor configuration and maintenance access
Alternative Models: What chips are recommended as replacements for NT3H2211W0FTTJ
Manufacturer Part Number Package Notes
NXP NT3H2111W0FTTJ TSSOP8 1KB EEPROM variant, same pinout
NXP NT3H2211W0FT1 SO8 2KB variant in SO8 package
NXP NTAG I2C NT3H1101 SO8/TSSOP8 First generation, 1KB EEPROM
STMicroelectronics M24LR64-R SO8/TSSOP8 64Kbit dual-interface EEPROM
Infineon NAC1080 QFN NFC actuator controller alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1