Opens in a new tab

NUP2105LT1G

CAN bus ESD protection, dual bidirectional TVS, SOT-23-3

13731

Effective Inventory

Image for reference only

Manufacturer Part:

NUP2105LT1G

Package:

SOT-23-3

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NUP2105LT1G from onsemi is a dual bidirectional TVS diode array in SOT-23-3 designed specifically for CAN bus ESD and surge protection up to 24V.

Key Specifications

Package SOT-23-3

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: NUP2105LT1G Product Introduction

The NUP2105LT1G from onsemi is a dual bidirectional TVS diode array in SOT-23-3 designed specifically for CAN bus ESD and surge protection up to 24V.

Working Principle: NUP2105LT1G Working Principle

The NUP2105LT1G is a CAN bus ESD protection device from onsemi in SOT-23-3, providing bidirectional TVS diode clamping on both CANH and CANL lines relative to ground. It is specifically designed for CAN (Controller Area Network) bus protection per ISO 11898. The device provides: (1) Bidirectional clamping: both positive and negative ESD events are clamped, protecting the CAN transceiver on both lines; (2) Low capacitance (8pF typical per line to ground), ensuring minimal signal integrity impact on high-speed CAN (up to 1Mbps); (3) ESD protection per IEC 61000-4-2: +/-15kV contact discharge, +/-25kV air discharge; (4) EFT protection per IEC 61000-4-4: 40A (5/50ns); (5) Surge protection per IEC 61000-4-5: 3.5A (8/20us). The working voltage is 24V, meaning the diode leakage is negligible below 24V (important because CAN bus can have common-mode voltages up to 12V per the standard). The breakdown voltage is 28.5V minimum, and the clamping voltage at IPP=3.5A is 40V maximum. The low capacitance (8pF) ensures the total bus capacitance budget per the CAN specification (typically 10pF per node, with 8pF from ESD protection this is tight but acceptable for short stubs). The SOT-23-3 package provides a compact footprint near the CAN connector. The device should be placed as close as possible to the bus connector, before the CAN transceiver, to divert ESD energy before it reaches the transceiver. The -LT1G suffix specifies SOT-23-3, tape-and-reel, lead-free.

Pin Description: NUP2105LT1G Pin Definition and Functions
Pin Name Type Function
1 CANH I/O CAN bus high line ESD clamp (bidirectional, connects to CANH bus)
2 GND Power Ground (connects to common bus ground)
3 CANL I/O CAN bus low line ESD clamp (bidirectional, connects to CANL bus)
Application Scenarios: In which products and applications is NUP2105LT1G used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for NUP2105LT1G
    Manufacturer Part Number Package Notes
    onsemi NUP2105LT1G SOT-23-3 Same device, onsemi brand
    NXP NUP2105LT1G SOT-23-3 Same device, NXP brand
    Texas Instruments TPD1E10B06DPYR SOT-23-3 ESD protection, 30V, TI brand
    Wurth 824012823 SOT-23-3 CAN ESD protection, Wurth brand
    Bourns CDSOT23-T24CAN SOT-23-3 CAN ESD protection, Bourns brand

    Recommend Parts

    IRFS4310ZTRLPBF

    IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

    Brand: infineon

    Package: D2PAK (TO-263AB)

    IN STOCK: 11137pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MSASJ105BB5475MFNA01

    4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

    Brand: gigadevice

    Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

    IN STOCK: 9701pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRF3415PBF

    150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 2940pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    105017-1001

    USB Type-C receptacle connector, 24-pin, SMD

    Brand: Amphenol

    Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

    IN STOCK: 5335pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRLB3034PBF

    IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 9724pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    XC6SLX75-2FGG484I

    Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

    Brand: xilinx

    Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

    IN STOCK: 890pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1