Opens in a new tab

Home » Crystals & Oscillators, Passive Components » O 48.00000-JO75-B-3.3-1 LF

O 48.00000-JO75-B-3.3-1 LF

48 MHz HCMOS crystal oscillator, 3.3V, ±50ppm stability, 15pF load, -20 to +70C, 7x5mm, stop function

10679

Effective Inventory

Image for reference only

Manufacturer Part:

O 48.00000-JO75-B-3.3-1 LF

Package:

7.0 x 5.0 x 1.8 mm (4-Pad SMD)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The O 48.00000-JO75-B-3.3-1 LF is a Jauch Quartz product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.

Key Specifications

Type SMD Crystal Oscillator (XO) with Stop Function
Series JO75
Frequency 48.000 MHz
Frequency Stability Over All +/- 50 ppm (B code)
Supply Voltage VDC 3.3V +/- 10%
Current Consumption 50 mA max (32-66.9 MHz range at 15pF)
Output HCMOS compatible
Output Load 15 pF (code 1)
Output Rise/Fall Time 5.0 ns max (10-79.9 MHz)
Symmetry at 0.5 x VDC 45%-55% typ (40%-60% max)
Phase Jitter (12kHz-20MHz) < 1.0 ps RMS
Start-up Time 10 ms max
Standby Current (Stop) 20 uA max
Operating Temperature -20C to +70C (standard)
Storage Temperature -55C to +125C
Package 7.0 x 5.0 x 1.8 mm, 4-Pad SMD
RoHS Compliant (LF suffix)

Features

48 MHz HCMOS crystal oscillator; JO75 7x5mm seam-sealed ceramic/metal package; 3.3V supply voltage; ±50ppm frequency stability (B code); Stop function (enable/disable via pin 1); Low phase jitter less than 1ps RMS; HCMOS compatible output; 15pF output load; 50mA max current consumption; Start-up time 10ms max; 20uA standby current; Tape and reel packaging; RoHS compliant lead-free (LF)

Applications

USB 2.0 Hi-Speed clock generation; Ethernet MAC timing reference; FPGA/MCU system clock; Video processing clock; Industrial networking; Telecommunications equipment; High-speed digital systems; Data acquisition timing

Product Introduction: O 48.00000-JO75-B-3.3-1 LF Product Introduction

The O 48.00000-JO75-B-3.3-1 LF from Jauch Quartz is a 48.000 MHz HCMOS crystal oscillator in the JO75 7.0 x 5.0mm surface-mount package with 3.3V supply and ±50ppm frequency stability (B code). The 48 MHz frequency is critical for USB 2.0 Hi-Speed applications, where the oscillator provides the reference clock for the USB PHY. The JO75 series features a stop function where pin 1 controls the oscillator output: when pin 1 is driven low (VIL less than 0.2 x VDC), the oscillator stops and the output goes to high impedance, reducing current consumption to 20uA max for power-saving modes. When pin 1 is open or driven high, the oscillator runs normally. The B stability code specifies ±50ppm total stability including tolerance at 25C, temperature variation over -20C to +70C, supply voltage change, aging, shock and vibration. The 15pF output load (code 1) is the standard for most CMOS clock inputs. The ceramic/metal seam-sealed package ensures excellent hermeticity and long-term frequency stability with phase jitter below 1ps RMS.

Working Principle: O 48.00000-JO75-B-3.3-1 LF Working Principle

The O 48.00000-JO75-B-3.3-1 LF operates as a crystal oscillator (XO) where an internal AT-cut quartz crystal resonator is combined with a sustaining amplifier and output buffer in a single package. The oscillator circuit maintains the crystal in continuous oscillation at its series resonant frequency of 48.000 MHz, with the amplifier providing the gain needed to compensate for crystal losses while maintaining the loop phase condition for stable oscillation. The output buffer converts the internal oscillator signal to HCMOS logic levels (VOH minimum 0.9 x VDC = 2.97V, VOL maximum 0.1 x VDC = 0.33V) suitable for driving standard CMOS clock inputs. The stop function on pin 1 operates by disabling the sustaining amplifier: when pin 1 is driven low (below 0.2 x VDC), the amplifier is turned off, the crystal stops oscillating, and the output buffer goes to high-impedance state. This allows system power management to shut down the clock during sleep modes, reducing supply current from 50mA to 20uA. The start-up time of 10ms maximum is the time from VDC exceeding the minimum threshold (or pin 1 going high) until the output achieves stable oscillation with correct frequency and amplitude.

Pin Description: O 48.00000-JO75-B-3.3-1 LF Pin Definition and Functions
Pin Name Type Function
1 E/D (Enable/Disable) Input Stop function control: Open or High = oscillator runs; Low (GND) = oscillator stops, output high-Z
2 GND Power Ground connection
3 Output Output HCMOS clock output at 48.000 MHz; 45-55% symmetry typical
4 VDC Power 3.3V power supply (+/- 10%)
Application Scenarios: In which products and applications is O 48.00000-JO75-B-3.3-1 LF used
  • USB 2.0 Hi-Speed: Provides the 48 MHz reference clock required by USB 2.0 Hi-Speed PHY transceivers with ±50ppm stability meeting the USB specification timing budget.
  • Ethernet MAC: Clock reference for 10/100 Ethernet MAC controllers where 48 MHz is used as the MII reference clock with low phase jitter for reliable data transfer.
  • FPGA System Clock: Provides a stable 48 MHz system clock for FPGA designs with stop function enabling power-down modes for energy-efficient operation.
  • Industrial Communication: Timing reference for industrial Ethernet and fieldbus protocols requiring precise clock synchronization with the JO75’s sub-picosecond phase jitter performance.
Alternative Models: What chips are recommended as replacements for O 48.00000-JO75-B-3.3-1 LF
Manufacturer Part Number Package Frequency Notes
Jauch O 48.0-JPO75-B-3.3-1-T1-LF 7x5mm 48 MHz Programmable version, wider temp range
Epson SG-7050CAN 48.0000MHz 7x5mm 48 MHz Pin-compatible XO alternative
TXC 7J-48.000MAAJ-T 7x5mm 48 MHz Industry-standard XO
NDK NZ2016SD 48.000MHz 7x5mm 48 MHz HCMOS XO alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1