Opens in a new tab

OPA2337EA/250

Dual CMOS op-amp, 3MHz GBW, RRO, 0.2pA Ib, 525uA Iq, SOT-23-8, 2.5-5.5V

5262

Effective Inventory

Image for reference only

Manufacturer Part:

OPA2337EA/250

Package:

SOT-23-8 2.9×1.6 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OPA2337EA/250 from Texas Instruments is a dual CMOS operational amplifier in an SOT-23-8 package, featuring 3 MHz gain bandwidth, rail-to-rail output swing, and 525 uA per-channel quiescent current. With 0.2 pA input bias current and operation from 2.5V to 5.5V, it is ideal for battery-powered instruments, photodiode preamps, and space-constrained analog signal conditioning.

Key Specifications

Channels 2 (dual)
Architecture CMOS
Gain Bandwidth 3 MHz
Slew Rate 1.2 V/us
Input Offset Voltage 500 uV (typical)
Input Bias Current 0.2 pA (typical)
Quiescent Current 525 uA per channel
Output Current 9 mA
Supply Voltage 2.5V – 5.5V
CMRR 90 dB
Package SOT-23-8 (2.9×1.6 mm)
Temperature -40 to +85 deg C

Features

  • Ultra-low 0.2 pA input bias current for high-impedance sensor interfaces
  • Rail-to-rail output swing maximizes dynamic range in single-supply systems
  • Input common-mode range includes ground for single-supply operation
  • SOT-23-8 package at 1/4 size of SO-8 for space-sensitive designs
  • Unity-gain stable with 120 dB open-loop gain

Applications

  • Battery-powered medical and portable instruments
  • Photodiode and transimpedance preamplifiers
  • Audio signal conditioning and low-noise preamps
  • ADC input driver circuits
  • Consumer electronics analog front-ends
Product Introduction: OPA2337EA/250 Product Introduction

The OPA2337 is a dual CMOS operational amplifier from Texas Instruments, part of the MicroAmplifier series. Packaged in the SOT-23-8, it is one of TI’s smallest dual op-amps at 1/4 the size of a conventional SO-8. The CMOS architecture provides low 0.2 pA input bias current, making it ideal for high-impedance sensor interfaces. With 3 MHz gain-bandwidth, 1.2 V/us slew rate, and rail-to-rail output swing, it operates from 2.5V to 5.5V single supply. The input common-mode range includes ground, enabling true single-supply operation. The dual channels feature independent circuitry for minimum crosstalk.

Working Principle: OPA2337EA/250 Working Principle

The OPA2337 uses a CMOS input stage providing ultra-low input bias current (0.2 pA typical) and high input impedance, followed by a folded-cascode gain stage and a rail-to-rail output stage. The output stage uses complementary P-channel and N-channel MOSFETs to swing within millivolts of both supply rails, maximizing dynamic range. The device is unity-gain stable with 120 dB open-loop gain and 90 dB CMRR. In the SOT-23-8 package, the two amplifier channels are completely independent with separate input and output pins, minimizing crosstalk even during overload conditions.

Pin Description: OPA2337EA/250 Pin Definition and Functions
Pin Name Type Function
1 V+ Power Positive supply (2.5-5.5V)
2 -In B Input Amplifier B inverting input
3 +In B Input Amplifier B non-inverting input
4 Out B Output Amplifier B output
5 V- Power Negative supply / Ground
6 Out A Output Amplifier A output
7 -In A Input Amplifier A inverting input
8 +In A Input Amplifier A non-inverting input
Application Scenarios: In which products and applications is OPA2337EA/250 used
  • Photodiode preamps: 0.2 pA bias current minimizes error in TIA configurations
  • Portable medical instruments: low power and small size for wearable sensors
  • Audio preamps: low noise and rail-to-rail output for maximum signal swing
  • ADC drivers: 3 MHz GBW drives medium-speed ADCs in single-supply systems
  • Battery-powered sensors: 525 uA/channel and ground-sensing for single-cell operation
Alternative Models: What chips are recommended as replacements for OPA2337EA/250
Manufacturer Part Number Package Notes
TI OPA2338EA/250 SOT-23-8 12.5 MHz GBW, G>=5 stable
TI OPA2310A3RUG DSBGA-8 3 MHz, 150 mA output, 1 us shutdown
TI TLV2322IP DIP-8 Lower cost, similar spec
Microchip MCP6002-I/SN SOIC-8 1 MHz, low cost dual CMOS op-amp
ADI AD8515ARMZ MSOP-8 5 MHz, low power dual op-amp

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1