Opens in a new tab

OPA2365AIDR

Dual 50MHz RRIO CMOS op amp, 100dB CMRR, 100uV Vos, 4.5nV noise, SOIC-8, -40-125C

8490

Effective Inventory

Image for reference only

Manufacturer Part:

OPA2365AIDR

Package:

SOIC-8 (4.90 x 3.90 x 1.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OPA2365AIDR from Texas Instruments is a dual 50 MHz, zero-crossover, rail-to-rail input/output CMOS operational amplifier with 100 dB minimum CMRR, 100 uV max offset, and 4.5 nV/sqrt(Hz) noise. Operating from 2.2V to 5.5V single supply, it features 25 V/us slew rate and 0.0004% THD+N. The AIDR suffix denotes the SOIC-8 package in tape-and-reel.

Key Specifications

Type Dual Rail-to-Rail CMOS Op Amp
Channels 2
GBW 50 MHz
Slew Rate 25 V/us
Input Offset Voltage 100 uV (max)
Input Bias Current 0.2 pA (typical)
CMRR 100 dB (minimum)
Noise 4.5 nV/sqrt(Hz) at 100 kHz
THD+N 0.0004%
Supply Voltage 2.2V – 5.5V (single)
Iq per Channel 4.6 mA (typical)
Output Swing Within 10 mV of rails
Settling Time 0.3 us to 0.01%
Package SOIC-8
Operating Temp -40 to 125 C

Features

  • 50 MHz gain-bandwidth product with zero-crossover distortion topology
  • 100 dB minimum CMRR with no input stage crossover distortion
  • Rail-to-rail input and output: input extends 100 mV beyond rails
  • Ultra-low 100 uV max offset voltage with 1 uV/C drift
  • Low noise: 4.5 nV/sqrt(Hz) at 100 kHz
  • 25 V/us slew rate for fast signal transients
  • 0.3 us settling time to 0.01%
  • 2.2V to 5.5V single-supply operation

Applications

  • Driving high-resolution SAR and delta-sigma ADCs
  • Audio signal conditioning with 0.0004% THD+N
  • Sensor amplification for precision measurement
  • Active filters in low-voltage portable systems
  • Process control and data acquisition systems
Product Introduction: OPA2365AIDR Product Introduction

The OPA2365AIDR from Texas Instruments is a dual zero-crossover, rail-to-rail input/output CMOS operational amplifier with 50 MHz gain-bandwidth product. It achieves 100 dB minimum CMRR with no input stage crossover distortion, a critical advantage over traditional CMOS op amps that exhibit CMRR degradation near the supply rails. The 100 uV maximum offset voltage, 1 uV/C drift, and 4.5 nV/sqrt(Hz) noise make it ideal for precision signal conditioning. The output swings within 10 mV of both rails, maximizing dynamic range in single-supply applications from 2.2V to 5.5V.

Working Principle: OPA2365AIDR Working Principle

The OPA2365AIDR uses TI proprietary zero-crossover input stage topology. Traditional rail-to-rail CMOS op amps use two complementary differential pairs (PMOS and NMOS) that alternate as the common-mode voltage traverses the input range, causing CMRR degradation at the crossover point. The OPA2365 eliminates this by using a single differential pair with a charge-pump-boosted supply that keeps the input pair biased in its optimal region across the entire common-mode range. This results in 100 dB minimum CMRR with zero crossover distortion and 0.0004% THD+N. The output stage uses a class AB CMOS push-pull topology that swings to within 10 mV of each rail under light loads. Internal compensation ensures stability with capacitive loads up to 1 nF.

Pin Description: OPA2365AIDR Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 V- Power Negative supply / ground (single supply)
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 V+ Power Positive supply (2.2-5.5V)
Application Scenarios: In which products and applications is OPA2365AIDR used
  • ADC driver: 50 MHz GBW drives 16-18 bit SAR/delta-sigma converters with low distortion
  • Audio conditioning: 0.0004% THD+N for high-fidelity signal paths
  • Sensor amplification: 100 uV offset and 4.5 nV noise for precision measurement
  • Active filters: High CMRR and zero crossover for accurate filter response
  • Portable systems: 2.2V minimum supply with rail-to-rail I/O for battery operation
Alternative Models: What chips are recommended as replacements for OPA2365AIDR
Manufacturer Part Number Package Notes
TI OPA2365AID SOIC-8 Same function, tube packaging
TI OPA2365AQDRQ1 SOIC-8 Automotive grade, AEC-Q100
ADI ADA4807-2ARMZ MSOP-8 Dual 180 MHz, low noise
TI OPA2350EA SSOP-8 Dual 38 MHz, RRIO, similar application

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1