Opens in a new tab

OPA365AIDBVR

50MHz zero-crossover RRO op amp, 100dB CMRR, 100uV Vos, SOT-23-5

7200

Effective Inventory

Image for reference only

Manufacturer Part:

OPA365AIDBVR

Package:

SOT-23-5 / DBV-5 (2.9 x 1.6 x 1.45 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OPA365AIDBVR from Texas Instruments is a 50MHz, zero-crossover, rail-to-rail input/output CMOS operational amplifier with 100dB CMRR and 100uV offset. Optimized for precision low-voltage single-supply applications from 2.2V to 5.5V in a SOT-23-5 package.

Key Specifications

Gain Bandwidth Product 50 MHz
Slew Rate 25 V/us
Input Offset Voltage 100uV typical
CMRR 100 dB minimum
Input Bias Current 0.2 pA typical
Voltage Noise 4.5 nV/sqrtHz @ 100kHz
THD+N 0.0004%
Supply Voltage 2.2V to 5.5V
Supply Current 4.6mA typical
Output Swing Within 10mV of rails
Operating Temperature -40 to 125 C
Package SOT-23-5 (DBV)

Features

  • Zero-crossover distortion topology
  • 100dB minimum CMRR
  • 0.0004% THD+N
  • Rail-to-rail input and output
  • Input extends 100mV beyond supply rails
  • 4.5 nV/sqrtHz low noise
  • 100uV low offset voltage
  • 0.2 pA input bias current
  • 25 V/us slew rate
  • 0.3us settling to 0.01%

Applications

  • ADC driver amplifiers
  • Audio signal conditioning
  • Sensor amplification
  • Precision instrumentation
  • Medical equipment signal chains
Product Introduction: OPA365AIDBVR Product Introduction

The OPA365AIDBVR from TI is a 50MHz zero-crossover rail-to-rail CMOS op amp in SOT-23-5. Zero-crossover topology eliminates input stage crossover distortion common in RRIO amplifiers, providing 100dB CMRR and 0.0004% THD+N. 100uV offset, 0.2pA bias current, 4.5nV/sqrtHz noise. 2.2-5.5V supply with output swinging within 10mV of rails.

Working Principle: OPA365AIDBVR Working Principle

Uses TI’s zero-crossover distortion topology where the input pair is dynamically biased to maintain constant transconductance across the entire common-mode range. This eliminates the crossover region distortion that occurs in conventional RRIO amplifiers when the common-mode voltage transitions between the N-channel and P-channel input pairs. The result is seamless 100dB CMRR across the full input range. Rail-to-rail output uses a common-source output stage with adaptive biasing.

Pin Description: OPA365AIDBVR Pin Definition and Functions
Pin Name Type Function
1 IN+ Input Non-inverting input
2 V- Power Negative supply (ground for single-supply)
3 IN- Input Inverting input
4 OUT Output Amplifier output
5 V+ Power Positive supply (2.2-5.5V)
Application Scenarios: In which products and applications is OPA365AIDBVR used
  • Precision ADC driver for 16-24 bit SAR/Delta-Sigma converters
  • Low-distortion audio preamplifier
  • Sensor signal conditioning with rail-to-rail output
  • Medical ECG/EEG front-end amplifier
  • Battery-powered instrumentation amplifier
Alternative Models: What chips are recommended as replacements for OPA365AIDBVR
Manufacturer Part Number Package Notes
TI OPA2365EA/250 SOIC-8 Dual version, SOIC package
ADI ADA4891-1 SOT-23-5 50MHz RRIO, similar performance
Maxim MAX44250 SOT-23-5 50MHz, zero-drift alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1