Opens in a new tab

OPA4727AIPWR

Quad 20MHz precision CMOS op-amp, e-trim, 150µV Vos, R-R output, TSSOP-14

14149

Effective Inventory

Image for reference only

Manufacturer Part:

OPA4727AIPWR

Package:

TSSOP-14 (5.0 × 6.4 × 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The OPA4727AIPWR is a quad-channel, 20 MHz, high-precision CMOS operational amplifier from Texas Instruments, packaged in a 14-pin TSSOP (PW) package. It utilizes TI’s proprietary e-trim technology for outstanding DC precision — 150 µV max offset and 1.5 µV/°C max drift — and features rail-to-rail output with a supply range of 4V to 12V. The device is specified for operation from -40°C to +125°C.

Key Specifications

Function Quad Precision CMOS Op-Amp
Channels 4
Supply Voltage 4V to 12V (single) or ±2V to ±6V (dual)
GBW Product 20 MHz
Slew Rate 30 V/µs
Input Offset Voltage 150 µV (max), 15 µV (typ)
Offset Drift 1.5 µV/°C (max)
Input Bias Current 500 pA (max)
CMRR 86 dB (min)
Quiescent Current 4.3 mA per channel
Package TSSOP-14 (5.0 × 6.4 mm)
Operating Temperature -40°C to +125°C

Features

  • e-trim technology for ultra-low offset (150 µV max) and drift (1.5 µV/°C max)
  • 20 MHz gain-bandwidth product and 30 V/µs slew rate
  • Rail-to-rail output swing to within 150 mV of supplies
  • Very low input bias current: 500 pA max
  • Low noise: 6 nV/√Hz at 100 kHz
  • THD+N: 0.0003% at 1 kHz for high-fidelity applications

Applications

  • Optical networking transimpedance amplifiers
  • Active filter design and integrator circuits
  • A/D converter driver and I/V converter for DACs
  • High-performance audio signal chain
  • Process control and test equipment
Product Introduction: OPA4727AIPWR Product Introduction

The OPA4727 is a quad-channel version of the OPA727 high-precision CMOS operational amplifier family from Texas Instruments. It uses e-trim, a package-level digital trimming technology, to achieve outstanding DC precision with offset voltage as low as 150 µV maximum and drift of 1.5 µV/°C maximum. The trimming is performed after packaging to eliminate shifts caused by assembly stress, and the devices are trimmed over temperature to correct for offset drift. With 20 MHz GBW, 30 V/µs slew rate, and 0.0003% THD+N, the OPA4727 delivers excellent AC performance alongside its DC precision, making it suitable for a wide range of signal conditioning and audio applications.

Working Principle: OPA4727AIPWR Working Principle

The OPA4727 uses a CMOS input stage with e-trim correction to achieve ultra-low offset voltage and drift. The e-trim process performs digital trimming of internal resistor networks after the die is encapsulated in its package, compensating for stress-induced offset shifts that occur during molding. The input stage features a folded-cascode architecture with active load for high CMRR and PSRR. The output stage is a rail-to-rail CMOS push-pull amplifier that can swing to within 150 mV of either supply rail with a 100 kΩ load. Each of the four channels operates independently with its own feedback path, sharing only the supply pins. The low 500 pA input bias current is achieved through the CMOS input pair, making the device suitable for high-impedance source applications such as transimpedance amplifiers for optical monitoring.

Pin Description: OPA4727AIPWR Pin Definition and Functions
Pin Name Type Function
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 V+ Power Positive supply (4-12V or ±2 to ±6V)
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 3OUT Output Channel 3 output
9 3IN- Input Channel 3 inverting input
10 3IN+ Input Channel 3 non-inverting input
11 V- Power Negative supply (GND for single supply)
12 4IN+ Input Channel 4 non-inverting input
13 4IN- Input Channel 4 inverting input
14 4OUT Output Channel 4 output
Application Scenarios: In which products and applications is OPA4727AIPWR used
  • Optical networking transimpedance amplifiers for ONET power monitoring
  • Active Bessel/Chebyshev filter banks for multi-channel signal conditioning
  • I/V converter for current-output DACs in precision instrumentation
  • High-fidelity audio preamplifier and equalization circuits
  • Multi-channel A/D converter input driver in data acquisition systems
Alternative Models: What chips are recommended as replacements for OPA4727AIPWR
Manufacturer Part Number Package Notes
TI OPA4277AIPWR TSSOP-14 Bipolar input, 1MHz GBW, ultra-low offset
TI OPA4322AIPWR TSSOP-14 20MHz, 5.5V, low-power CMOS quad
ADI ADA4807-4 TSSOP-14 180MHz, low-noise, rail-to-rail quad
Microchip MCP6V94 TSSOP-14 Auto-zeroed quad, 10MHz, low offset
Maxim MAX44248 TSSOP-14 Precision quad, 36V, low offset

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1