Opens in a new tab

PA7128J

128-macrocell CPLD, 7.5ns delay, 3.3V, JTAG ISP, 84-PLCC package, ~3000 gates

8662

Effective Inventory

Image for reference only

Manufacturer Part:

PA7128J

Package:

84-PLCC

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PA7128J is a high-performance Complex Programmable Logic Device (CPLD) featuring 128 macrocells organized in multiple logic array blocks (LABs). Manufactured using EEPROM-based non-volatile technology, this device offers in-system programmability (ISP) and high pin-to-pin performance suitable for a wide range of digital logic applications. With 128 macrocells and approximately 3,000 usable gates, it bridges the gap between small PLDs and larger FPGAs, providing predictable timing characteristics inherent to CPLD architectures.

Key Specifications

Type CPLD (Complex PLD), EEPROM-based
Macrocells 128
Usable Gates ~3,000 gates
Supply Voltage (VCC) 3.3V core / 3.3V I/O
Propagation Delay (tPD) 7.5 ns typical
System Frequency (fCNT) 178 MHz max
I/O Pins Up to 100 user I/O
Logic Array Blocks 8 LABs (16 macrocells each)
In-System Programming Yes (JTAG/IEEE 1149.1)
Package 84-Pin PLCC (J-lead chip carrier)
Operating Temperature -40°C ~ +85°C (Commercial/Industrial)

Features

  • 128 macrocells, 8 LAB architecture
  • High-speed: 7.5ns pin-to-pin delay
  • In-system programmable via JTAG
  • Non-volatile EEPROM technology
  • Four product term per macrocell
  • Programmable product term steering
  • Individual output enable per pin
  • Registered or combinatorial output
  • Programmable slew rate control
  • Programmable power-down mode per macrocell
  • IEEE 1149.1 JTAG boundary scan
  • 10,000 program/erase cycles
  • RoHS compliant package

Applications

  • High-speed logic integration
  • Bus bridging and protocol conversion
  • DSP and microprocessor peripheral logic
  • Memory controller design
  • State machine implementations
  • Telecommunications interface
  • Industrial control systems
  • Test and measurement equipment
Product Introduction: PA7128J Product Introduction

The PA7128J is a 128-macrocell Complex Programmable Logic Device (CPLD) designed for high-performance digital logic applications. Built on EEPROM non-volatile technology, it offers the predictable timing and instant-on characteristics inherent to CPLD architectures, making it an excellent choice for glue logic, bus bridging, and control plane applications. The device is organized as 8 Logic Array Blocks (LABs), each containing 16 macrocells, interconnected through a programmable global routing matrix. Each macrocell features four product terms with programmable steering, allowing the allocation of additional product terms to specific macrocells when needed. With a pin-to-pin propagation delay of 7.5ns and counter frequencies up to 178MHz, it supports high-speed system designs. The device supports in-system programming (ISP) through an IEEE 1149.1 JTAG interface, enabling programming and reconfiguration after the device is mounted on the PCB. Each I/O pin features individually programmable output enable, slew rate control, and registered/combinatorial output options. The 84-pin PLCC package provides a robust through-hole form factor with up to 100 available user I/O pins. The PA7128J is suitable for a wide range of applications including bus interfacing, memory control, state machine design, and general-purpose logic consolidation in industrial, telecom, and computing systems.

Working Principle: PA7128J Working Principle

The PA7128J CPLD operates on the principle of multiple PLD-like logic blocks interconnected through a programmable routing matrix, all implemented with non-volatile EEPROM configuration memory. The architecture consists of three main components: Logic Array Blocks (LABs), a Global Routing Pool (GRP), and I/O Control Blocks. Each of the 8 LABs contains 16 macrocells, each with its own AND array, OR gate, and flip-flop. Within a LAB, 16 macrocells share a common set of input signals from the global routing pool. Each macrocell has four dedicated product terms, with a product term allocator that can redistribute product terms between adjacent macrocells for designs requiring more logic per output. The macrocell flip-flop can be configured as D, T, JK, or SR type, or bypassed entirely for combinatorial operation. The Global Routing Pool (GRP) is a fully connected switching matrix that routes signals between LABs and between LABs and I/O pins. All signals originating from any macrocell output or any I/O pin can be routed to any LAB input through the GRP, providing high routability with predictable delay. I/O pins can be configured as inputs, outputs, or bidirectional signals, with individual output enable control. The JTAG boundary scan interface (IEEE 1149.1) serves dual purposes: it provides boundary scan testing capability for board-level testing, and it enables in-system programming of the EEPROM configuration memory. Because configuration is stored in non-volatile EEPROM cells, the device is instant-on at power-up — no configuration download is required, unlike SRAM-based FPGAs. The EEPROM cells can be reprogrammed at least 10,000 times with data retention guaranteed for 20 years.

Pin Description: PA7128J Pin Definition and Functions
Pin Group Count Type Description
I/O Pins ~100 I/O User-configurable I/O (I/O banks vary by package)
TCK 1 Input JTAG Test Clock
TMS 1 Input JTAG Test Mode Select
TDI 1 Input JTAG Test Data In
TDO 1 Output JTAG Test Data Out
GND ~8 Power Ground connections
VCC ~4 Power Core and I/O supply voltage
Note: Exact pinout depends on specific package variant. Refer to datasheet for complete pin assignment.
Application Scenarios: In which products and applications is PA7128J used
  • Complex glue logic consolidation
  • Bus interface and protocol bridging
  • Microprocessor peripheral control
  • Memory controller and timing logic
  • High-speed state machine design
  • Telecom line card processing
  • Industrial automation controllers
  • Automated test equipment
Alternative Models: What chips are recommended as replacements for PA7128J
Manufacturer Part Number Description
Lattice ispMACH 4A 128 128-macrocell CPLD, 3.3V, ISP
Altera/Intel EPM7128S MAX 7000S CPLD, 128 macrocells
Xilinx XC95144XL 144-macrocell CPLD, 3.3V
Microchip ATF1508AS 128-macrocell CPLD, EE-based

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1