Opens in a new tab

PC817C

1-ch optocoupler, CTR 200-400% (C grade), 5000Vrms, 80V Vceo, DIP-4

70000

Effective Inventory

Image for reference only

Manufacturer Part:

PC817C

Package:

DIP-4 (300mil, 7.62 x 5.08 x 4.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PC817C from Sharp (now Avago/Broadcom) is a single-channel optocoupler consisting of an infrared LED optically coupled to a phototransistor in a 4-pin DIP package. The C suffix indicates a CTR range of 200-400%, providing high gain for signal isolation and SMPS feedback applications. It offers 5000Vrms isolation voltage.

Key Specifications

Channels 1
Isolation Voltage 5000Vrms (min)
CTR (Current Transfer Ratio) 200-400% (C grade, at IF=5mA)
LED Forward Voltage 1.2V (typ at IF=20mA)
LED Forward Current 50mA (max)
Collector-Emitter Voltage 80V (max)
Collector Current 50mA (max)
Bandwidth -3dB at approx 80kHz
Rise Time 4us (typ)
Fall Time 3us (typ)
Operating Temperature -30C to +100C
Package DIP-4 (300mil)

Features

  • 5000Vrms isolation voltage
  • High CTR: 200-400% (C grade)
  • 80V collector-emitter voltage
  • 4-pin DIP through-hole package
  • UL 1577 recognized
  • Wide CTR grade selection (A/B/C/D)

Applications

  • SMPS feedback loop
  • Signal isolation
  • Microcontroller I/O isolation
  • AC zero-cross detection
  • Power supply supervision
Product Introduction: PC817C Product Introduction

The PC817C from Sharp is a single-channel optocoupler in a 4-pin DIP package providing 5000Vrms galvanic isolation. The C suffix grade offers a CTR (Current Transfer Ratio) of 200-400% at IF=5mA, providing high sensitivity for low-drive applications. The 80V collector-emitter voltage rating is higher than many competing optocouplers, giving more headroom for output circuit design. The PC817 is available in four CTR grades (A: 50-150%, B: 100-300%, C: 200-400%, D: 300-600%) allowing designers to optimize gain for specific applications. It is one of the most widely used optocouplers worldwide, particularly in SMPS feedback loops where its high CTR ensures reliable signal coupling even with low LED drive currents.

Working Principle: PC817C Working Principle

The PC817C works on the same optical coupling principle as other optocouplers. Forward current through the infrared LED (IF) generates photons that cross the dielectric isolation barrier and illuminate the base region of the output phototransistor. The absorbed photons create base-emitter photocurrent, which the transistor amplifies by its hFE to produce collector current (IC). The CTR of 200-400% means that IC is 2-4 times IF, providing signal gain. This high CTR is achieved by optimizing the phototransistor’s hFE and the optical coupling efficiency. In SMPS feedback applications, the LED is typically driven by a TL431 shunt regulator through a current-setting resistor, and the phototransistor collector current controls the PWM controller’s feedback pin to regulate the output voltage.

Pin Description: PC817C Pin Definition and Functions
Pin Name Type Description
1 Anode Input LED anode; connect through current-limiting resistor
2 Cathode Input LED cathode; connects to drive circuit ground
3 Emitter Output Phototransistor emitter; output ground
4 Collector Output Phototransistor collector; pull up through resistor
Application Scenarios: In which products and applications is PC817C used
  • SMPS Feedback Isolation: Provides isolated voltage feedback from secondary 5V/12V output to primary PWM controller; TL431 drives LED, CTR of 200-400% ensures sufficient collector current to control feedback pin even at low IF
  • AC Zero-Cross Detection: LED driven through resistor from AC mains; phototransistor output pulses at zero-crossings for TRIAC phase control timing with 5000Vrms mains isolation
  • Industrial Signal Isolation: Isolates 4-20mA current loops and digital signals between PLCs and sensors with 5000Vrms preventing ground loops in noisy factory environments
Alternative Models: What chips are recommended as replacements for PC817C
Model Manufacturer CTR VCEO Key Difference
TLP521-1 Toshiba 50-300% 55V Lower CTR range, lower VCEO
PC817A Sharp 50-150% 80V Lower CTR grade
PC817B Sharp 100-300% 80V Medium CTR grade
PC817D Sharp 300-600% 80V Higher CTR grade
6N137 Vishay Logic 7V High-speed (10Mbps), logic output

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1