Opens in a new tab

PCA9534APWR

8-bit I2C I/O expander, 400kHz, 5V-tolerant I/O, interrupt, 1uA standby, TSSOP-16

7929

Effective Inventory

Image for reference only

Manufacturer Part:

PCA9534APWR

Package:

TSSOP-16 (5.0 x 4.4 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PCA9534APWR from Texas Instruments is an 8-bit I2C/SMBus I/O expander with interrupt output, configuration registers, and polarity inversion. Operating from 2.3V to 5.5V at 400kHz, it expands GPIO capability in a TSSOP-16 package.

Key Specifications

Function 8-bit I2C I/O Expander
I/O Pins 8 (individually configurable)
Interface I2C / SMBus, 400kHz
Supply Voltage 2.3V to 5.5V
Standby Current 1uA (max)
I/O Tolerance 5V
Interrupt Output Open-drain, active-low
Address Pins 3 (A0-A2, up to 8 devices)
Operating Temperature -40 to 85 C

Features

  • 8-bit GPIO expansion via I2C bus
  • Individual I/O direction configuration
  • Polarity inversion register for input polarity control
  • Open-drain interrupt output on input change
  • 5V-tolerant I/O pins
  • 1uA maximum standby current
  • Internal power-on reset
  • Three address pins for up to 8 devices on one bus

Applications

  • LED control and status monitoring
  • Button and switch input reading
  • ACPI power switch control
  • Industrial I/O expansion
  • Sensor and fan control interface
Product Introduction: PCA9534APWR Product Introduction

The PCA9534APWR from Texas Instruments is an 8-bit I2C and SMBus I/O expander that provides general-purpose remote I/O expansion for microcontroller families via a two-wire serial interface. The device features 8 individually configurable I/O pins that can be set as inputs or outputs through a configuration register. A polarity inversion register allows the input polarity to be reversed without external logic. An open-drain active-low interrupt output (INT) notifies the host controller when any input state changes, eliminating the need for continuous polling. Operating from 2.3V to 5.5V with 5V-tolerant I/O pins, the device is compatible with both 3.3V and 5V systems. The maximum standby current of only 1uA makes it ideal for battery-powered applications. Three hardware address pins (A0-A2) allow up to eight devices to share the same I2C bus, and using both PCA9534 and PCA9534A allows up to 16 devices.

Working Principle: PCA9534APWR Working Principle

The PCA9534APWR operates as an I2C slave device providing 8 bits of remote GPIO expansion. Key subsystems include: (1) I2C Interface – a standard 2-wire slave interface (SDA, SCL) supporting 400kHz fast mode; device address is set by A0-A2 pins; (2) Configuration Register – 8 bits control the direction of each I/O pin (0=output, 1=input); defaults to all inputs on power-up; (3) Output Register – 8 bits store the output data for pins configured as outputs; outputs are latched with high-current drive for LED driving; (4) Input Register – 8 bits read the current state of all I/O pins; (5) Polarity Inversion Register – 8 bits allow individual polarity inversion of input pins; (6) Interrupt Logic – compares current input state with previous state; any change generates an active-low INT output; (7) Power-On Reset – initializes all registers to default values on power-up.

Pin Description: PCA9534APWR Pin Definition and Functions
Pin Name Type Function
1 A0 Input Address bit 0
2 A1 Input Address bit 1
3 A2 Input Address bit 2
4 P0 I/O I/O pin 0
5 P1 I/O I/O pin 1
6 P2 I/O I/O pin 2
7 P3 I/O I/O pin 3
8 VSS Power Ground
9 P4 I/O I/O pin 4
10 P5 I/O I/O pin 5
11 P6 I/O I/O pin 6
12 P7 I/O I/O pin 7
13 INT Output Interrupt output (active low, open-drain)
14 SCL Input I2C serial clock
15 SDA I/O I2C serial data
16 VDD Power Supply voltage (2.3V to 5.5V)
Application Scenarios: In which products and applications is PCA9534APWR used
  • LED control: driving multiple LEDs from I2C with high-current latched outputs
  • Button/switch reading: monitoring multiple inputs with interrupt-driven change detection
  • ACPI power switch control: power management in portable computers
  • Industrial I/O expansion: adding digital I/O to PLCs and controllers
  • Sensor and fan control: monitoring and controlling peripheral devices via I2C
Alternative Models: What chips are recommended as replacements for PCA9534APWR
Manufacturer Part Number Package Notes
TI PCA9534PWR TSSOP-16 Different I2C address variant
NXP PCA9534PW TSSOP-16 Original manufacturer, compatible
TI PCF8574APWR TSSOP-16 Quasi-bidirectional, no config reg
Microchip MCP23008-E/SS SSOP-20 8-bit I2C expander with more features
NXP PCA9554APW TSSOP-16 With internal I/O pull-up resistors

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1