Opens in a new tab

PCA9539BS

16-bit I2C I/O expander, TSSOP-24

9620

Effective Inventory

Image for reference only

Manufacturer Part:

PCA9539BS

Package:

TSSOP-24 (7.80 x 4.40 x 1.20 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

PCA9539BS Overview

The PCA9539BS is a 16-bit I2C-bus low-power I/O expander from NXP with integrated interrupt output and reset input, supply voltage 2.3V-5.5V, in a TSSOP-24 package, ideal for GPIO expansion needs.

Key Features

  • 16-bit I/O port
  • I2C interface (400kHz)
  • Supply voltage: 2.3V-5.5V
  • Interrupt output
  • Reset input
  • Standby current: 1uA
Product Introduction: PCA9539BS Product Introduction

The PCA9539BS is a 16-bit I2C-bus and SMBus-compatible I/O expander from NXP Semiconductors in a 24-pin HVQFN (4 x 4 x 0.85 mm) package. It provides 16 quasi-bidirectional I/O pins that can be individually configured as inputs or outputs. The device features an active-low interrupt output (INT) that asserts on any input state change, a polarity inversion register, low standby current of 0.25 uA, and 400 kHz I2C clock rate. Operating from 2.3 V to 5.5 V over the -40 C to +85 C temperature range, it supports up to four devices on one I2C bus via two address pins.

Working Principle: PCA9539BS Working Principle

The PCA9539BS expands the I/O capability of a microcontroller through the I2C serial bus. The device appears as a set of I2C-register-mapped ports: Input Port registers read the current state of all 16 I/O pins, Output Port registers set the output latch value, Polarity Inversion registers can invert the input data, and Configuration registers control each pin direction (input or output). When configured as outputs, writing a 0 strongly drives the pin low while writing a 1 allows the internal weak pull-up to pull the pin high. When configured as inputs, the output latch should be set to 1, and the pin state can be read from the Input Port register. The interrupt output (INT) is asserted active-low whenever any input pin changes state from its previously read value, eliminating the need for the host to continuously poll the device. The two hardware address pins (A0, A1) allow up to 4 PCA9539 devices to share the same I2C bus, providing up to 64 additional I/O pins. The RESET pin resets all registers to default values without cycling power, useful for system initialization.

Pin Description: PCA9539BS Pin Definition and Functions
Pin Name Description
1 A0 I2C address bit 0; connect to VDD or GND
2 A1 I2C address bit 1; connect to VDD or GND
3 RESET Active-low reset; resets all registers to default
4-7 IO0.0-IO0.3 Port 0 I/O pins 0-3; quasi-bidirectional
8 VSS Ground
9-12 IO0.4-IO0.7 Port 0 I/O pins 4-7; quasi-bidirectional
13 INT Interrupt output; active low, asserts on input change
14-17 IO1.0-IO1.3 Port 1 I/O pins 0-3; quasi-bidirectional
18 VDD Power supply (2.3 V to 5.5 V)
19-22 IO1.4-IO1.7 Port 1 I/O pins 4-7; quasi-bidirectional
23 SCL I2C serial clock; requires external pull-up resistor
24 SDA I2C serial data; requires external pull-up resistor
Application Scenarios: In which products and applications is PCA9539BS used
  • GPIO Expansion: Adding 16 digital I/O lines to a microcontroller using only I2C SDA/SCL pins
  • Keypad Scanning: 4×4 matrix keypad interface with interrupt-driven change detection
  • LED Control: Driving 16 status LEDs with individual on/off control via I2C commands
  • Industrial I/O Modules: Remote digital input/output expansion on factory floor I2C backplane
  • Power Management: Controlling power enable signals and reading power-good status across multiple voltage rails
Alternative Models: What chips are recommended as replacements for PCA9539BS
Model Manufacturer Bits Interface INT Package
PCA9539PW NXP 16 I2C Yes TSSOP-24
MCP23017 Microchip 16 I2C Yes SSOP-28
PCF8575 NXP/TI 16 I2C Yes SOIC-24
TCA9539 Texas Instruments 16 I2C Yes TSSOP-24
MAX7317 Maxim/ADI 10 SPI Yes QSOP-24

PCA9539BS is a 16-bit I2C GPIO expander from NXP in HVQFN24 (4x4mm) with interrupt and reset. The PCA9539PW is the TSSOP-24 version still in production. PCA9555 provides similar 16-bit I/O with internal pull-up resistors in DIP-24/TSSOP-24. For lower pin count, PCA9536 offers 4-bit I2C GPIO in TSSOP-8. MAX7326 from ADI provides 16-bit I2C GPIO with hot-insertion support. MCP23017 from Microchip offers 16-bit I2C GPIO with configurable interrupt outputs.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1