Opens in a new tab

PCA9539BS

16-bit I2C I/O expander, interrupt, polarity inversion, TSSOP-24

8900

Effective Inventory

Image for reference only

Manufacturer Part:

PCA9539BS

Package:

TSSOP-24 (4.4 x 7.8 x 1.1mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PCA9539BS is a 16-bit I2C I/O expander from NXP Semiconductors with interrupt output, configurable polarity inversion, and reset in a TSSOP-24 package.

Key Specifications

I/O Channels 16 (P0_0-P0_7, P1_0-P1_7)
Interface I2C (up to 400kHz)
I2C Address Configurable (3 address pins, 8 addresses)
I/O Voltage 2.3V to 5.5V (independent of VDD)
Supply Voltage (VDD) 2.3V to 5.5V
Output Sink Current 25mA per pin, 200mA total
Input Leakage 1µA max
Interrupt Output Yes (active low, open-drain)
Polarity Inversion Yes (per-pin configurable)
Operating Temperature -40°C to +85°C
Package TSSOP-24 (4.4 x 7.8mm)

Features

  • 16 bidirectional I/O pins expand MCU GPIO capability
  • I2C interface with 400kHz fast-mode support
  • 3 hardware address pins for up to 8 devices on one bus
  • Interrupt output on input change (no polling needed)
  • Per-pin polarity inversion register
  • Independent I/O voltage (2.3-5.5V) from VDD
  • 25mA sink per output for direct LED drive
  • Active-low reset pin for power-on initialization

Applications

  • MCU GPIO expansion for keyboards and switches
  • LED control and status indication
  • Industrial I/O modules
  • Server and telecom board management
  • Multi-segment display driving
Product Introduction: PCA9539BS Product Introduction

The PCA9539BS from NXP Semiconductors is a 16-bit I2C-bus GPIO expander that provides 16 bidirectional I/O pins controlled via an I2C interface. It is designed to expand the I/O capability of MCUs in applications where pin count is limited. The device features an interrupt output that activates when any input pin changes state, eliminating the need for I2C polling. Per-pin polarity inversion allows direct interfacing with active-low signals without software inversion. Three address pins allow up to 8 PCA9539 devices on the same I2C bus, providing up to 128 additional I/O pins. Each output can sink 25mA, sufficient for direct LED driving. The BS suffix denotes the TSSOP-24 package.

Working Principle: PCA9539BS Working Principle

The PCA9539BS is controlled entirely through I2C register access. The 8 internal registers include: Input Port (read pin states), Output Port (set output levels), Polarity Inversion (invert input logic), Configuration (set pin direction: 0=output, 1=input), plus registers for bus transactions. When a pin is configured as output (Configuration bit=0), the Output Port register bit drives the pin high or low. When configured as input (Configuration bit=1), the pin is high-impedance and its state can be read from the Input Port register. The Polarity Inversion register XORs the input data, so setting a bit to 1 inverts the corresponding input reading — useful for active-low buttons. The interrupt output (INT) is asserted low whenever any input pin changes state from the last read. Reading the Input Port register clears the interrupt. The active-low RESET pin restores all registers to their default states (all inputs, no inversion). The I2C address is set by the three hardware address pins (A0, A1, A2), allowing 8 unique addresses from 0x74 to 0x77 on the I2C bus.

Pin Description: PCA9539BS Pin Definition and Functions
Pin Group Count Function Description
VDD/GND 2 Power Supply (2.3-5.5V) and ground
SDA/SCL 2 I2C I2C data and clock
A0/A1/A2 3 Input I2C address select pins
INT 1 Output Interrupt output (active low, open-drain)
RESET 1 Input Active-low reset
P0_0 to P0_7 8 I/O Port 0 bidirectional I/O pins
P1_0 to P1_7 8 I/O Port 1 bidirectional I/O pins

PCA9539BS uses the HVQFN24 (4x4x0.85mm, SOT616-1) surface-mount package from NXP: Pin 1 = VDD, Pin 2 = A0 (address), Pin 3 = A1 (address), Pin 4 = SCL, Pin 5 = SDA, Pin 6 = RESET (active-low), Pin 7 = INT (interrupt, active-low), Pins 8-15 = P00-P07 (Port 0 I/O), Pin 16 = VSS (GND), Pins 17-24 = P10-P17 (Port 1 I/O), Exposed Pad = GND. The RESET pin replaces the A2 address pin found on PCA9555, limiting the bus to 4 devices instead of 8. Pin 1 is marked by a dot in the corner. The exposed pad must be soldered to the PCB ground plane for thermal and electrical performance. All 16 I/O pins default to inputs with weak internal pull-ups on power-up. For TSSOP-24 version, PCA9539PW provides the same pinout.

Application Scenarios: In which products and applications is PCA9539BS used
  • Keyboard Scanning: 16 I/O pins form 8×8 matrix for 64 keys; INT pin alerts MCU on any keypress change
  • LED Control: 25mA sink per pin directly drives 16 indicator LEDs via I2C without additional drivers
  • Industrial I/O: Polarity inversion simplifies interface to active-low PLC inputs without software overhead
  • Server Management: 8 addresses × 16 pins = 128 I/O for fan, power, and status monitoring across a single I2C bus
  • Display Segments: 16 outputs multiplexed with 8 port pins drive 7-segment displays with minimal MCU pins
Alternative Models: What chips are recommended as replacements for PCA9539BS
Model Manufacturer Key Difference Package Specs
PCA9535PW NXP Same in TSSOP-24 without polarity inversion – –
PCAL9539BPW NXP With latchable inputs and programmable pull-ups – –
MCP23017-E/SS Microchip 16-bit, I2C, SSOP-28, with pull-ups and interrupt – –
SX1509IBIITRT Semtech 16-bit, I2C, LED driver, keypad engine, QFN-28 – –
MAX7317ATG+ Maxim/ADI 10-bit, SPI, PWM LED driver – –

PCA9539BS is a 16-bit I2C GPIO expander from NXP in HVQFN24. The PCA9539PW provides the same in TSSOP-24 (still in production). The PCA9555 offers 16-bit I/O with internal pull-up resistors in DIP-24/TSSOP-24. The MCP23017 from Microchip provides 16-bit I2C GPIO with configurable interrupt in DIP-28/SOIC-28. The MAX7316 from ADI/Maxim offers 16-bit I2C GPIO with hot-insertion support. The TCA9555 from TI provides 16-bit I2C GPIO in TSSOP-24. For lower pin count, PCA9536 offers 4-bit in TSSOP-8.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1