Opens in a new tab

PCA9555PW

16-bit I2C/SMBus GPIO expander with interrupt, 2.3-5.5V, TSSOP24, 400kHz, 5V tolerant I/Os

6847

Effective Inventory

Image for reference only

Manufacturer Part:

PCA9555PW

Package:

TSSOP24 (SOT355-1) 7.8 x 4.4 x 1.1 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The NXP PCA9555PW is a 16-bit I2C-bus/SMBus GPIO expander with interrupt output in a TSSOP24 package. It provides 16 bits of general purpose parallel I/O expansion, features 5V tolerant I/Os, individual I/O configuration, polarity inversion, and supports up to 400 kHz I2C clock frequency with up to 8 devices on the same bus.

Key Specifications

Supply Voltage (VDD) 2.3 V to 5.5 V
I/O Bits 16 (two 8-bit ports)
Interface I2C-bus / SMBus
Max Clock Frequency 400 kHz
Max Sink Current per Bit 25 mA
Source Current per Bit 10 mA
Standby Current 0.25 µA (typical)
Internal Pull-up 100 kΩ per bit
I/O Tolerance 5V tolerant
Operating Temperature -40°C to +85°C
Package TSSOP24 (7.8 x 4.4 x 1.1 mm)

Features

  • 16 I/O pins which default to 16 inputs upon power-up
  • 5V tolerant I/Os for mixed-voltage environments
  • Polarity Inversion register for input flexibility
  • Active LOW open-drain interrupt output
  • Internal 100 kΩ pull-up resistors on each I/O
  • Noise filter on SCL/SDA inputs
  • Three address pins allow up to 8 devices on same bus
  • Internal power-on reset with no glitch on power-up

Applications

  • ACPI power switches in computing systems
  • Sensor and push-button monitoring
  • LED control and fan management
  • Industrial I/O expansion
Product Introduction: PCA9555PW Product Introduction

The NXP PCA9555PW is a 24-pin CMOS device that provides 16 bits of General Purpose parallel Input/Output (GPIO) expansion for I2C-bus/SMBus applications. It was developed to enhance the NXP family of I2C-bus I/O expanders with improvements including higher drive capability, 5V I/O tolerance, lower supply current, individual I/O configuration, and smaller packaging. The device consists of two 8-bit Configuration, Input, Output, and Polarity Inversion registers. The system controller can enable each I/O as either input or output by writing to the configuration bits. The open-drain interrupt output is activated when any input state differs from its corresponding input port register state. Three hardware address pins allow up to eight devices on the same I2C-bus. The device operates from 2.3V to 5.5V with 0.25 µA typical standby current.

Working Principle: PCA9555PW Working Principle

The PCA9555PW communicates with the host controller via a standard I2C-bus/SMBus interface at up to 400 kHz. It contains four register pairs (Configuration, Input, Output, Polarity Inversion) for each 8-bit port (Port 0 and Port 1). The Configuration register determines whether each pin is an input (default) or output. The Output register holds data written to pins configured as outputs. The Input register reflects the current state of pins configured as inputs. The Polarity Inversion register allows inverting the polarity of input pins. When any input pin changes state from its registered value, the open-drain interrupt (INT) output is asserted LOW, alerting the host to read the Input registers. Reading the Input register clears the interrupt. Three address pins (A0-A2) set the I2C slave address, allowing up to 8 devices (128 I/Os) on a single bus.

Pin Description: PCA9555PW Pin Definition and Functions
Pin Name Type Function
1-4 A0-A2, P00 Input/I/O Address inputs / Port 0 pin 0
5-8 P01-P04 I/O Port 0 pins 1-4
9 VSS Power Ground
10-13 P05-P07 I/O Port 0 pins 5-7
14 INT Output Active LOW interrupt output (open-drain)
15-18 P10-P13 I/O Port 1 pins 0-3
19 SCL Input I2C-bus serial clock
20 SDA I/O I2C-bus serial data
21-24 P14-P17 I/O Port 1 pins 4-7
Application Scenarios: In which products and applications is PCA9555PW used
  • ACPI power switches in computing systems
  • Sensor monitoring and push-button inputs
  • LED display control and fan management
  • Industrial automation I/O expansion
  • Embedded system peripheral interface expansion
Alternative Models: What chips are recommended as replacements for PCA9555PW
Manufacturer Part Number Package Notes
Texas Instruments PCA9555PW TSSOP-24 Direct equivalent
Microchip MCP23S17-E/SS SSOP-28 SPI variant, similar function
onsemi PCA9655E TSSOP-24 Compatible, higher drive current
NXP PCF8575TS SSOP-24 Similar 16-bit I2C expander
Maxim Integrated MAX7317ATG+ TQFN-24 10-port I2C expander alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1