Opens in a new tab

PCF8574AT

8-bit I2C I/O expander, quasi-bidirectional, INT pin, SOIC-16

3200

Effective Inventory

Image for reference only

Manufacturer Part:

PCF8574AT

Package:

SOIC-16 (10.3 x 10.3 x 2.35mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PCF8574AT is a remote 8-bit I/O expander for the I2C bus from NXP Semiconductors with quasi-bidirectional ports, interrupt output, and 100kHz I2C interface in an SOIC-16 package.

Key Specifications

Number of I/O 8 (quasi-bidirectional)
Interface I2C (standard-mode, 100kHz max)
Supply Voltage 2.5V to 6V
Standby Current 2.5µA typical (static)
I2C Addresses 8 programmable (3 address pins A0, A1, A2)
Slave Address (PCF8574A) 0x38 – 0x3F
Slave Address (PCF8574) 0x20 – 0x27
Max Sink Current per I/O 25mA
Total Package Sink Current 80mA
Source Current per I/O 0.1mA (weak internal pull-up)
Interrupt Output Active-low, open-drain (INT)
Port Default (Power-On) Inputs (HIGH with 100µA weak pull-up)
Operating Temperature -40°C to +85°C
Package SOIC-16 (10.3 x 10.3mm)

Features

  • 8 quasi-bidirectional I/O pins (no direction register needed)
  • I2C bus interface up to 100kHz
  • Active-low open-drain interrupt output (INT)
  • 3 hardware address pins for 8 device addresses
  • 2.5µA static standby current
  • Latched outputs directly drive LEDs
  • 25mA sink current per I/O pin
  • PCF8574A has different I2C base address from PCF8574
  • Up to 16 devices (8 PCF8574 + 8 PCF8574A) on one I2C bus = 128 I/Os

Applications

  • LED signs and displays
  • Keypad and button matrix scanning
  • GPIO expansion for microcontrollers
  • Industrial control and PLC
  • Mobile device peripheral control
Product Introduction: PCF8574AT Product Introduction

The PCF8574AT from NXP Semiconductors is a remote 8-bit I/O expander that communicates via the I2C bus, adding 8 general-purpose I/O pins to any I2C-capable microcontroller. The eight quasi-bidirectional ports can each serve as an input or output without requiring a data-direction register—writing a 1 to a port configures it as an input (weak 100µA pull-up active), while writing a 0 drives the pin LOW with a strong sink transistor. The active-low open-drain interrupt output (INT) signals the host when any input pin changes state, eliminating the need for continuous I2C polling. The PCF8574A variant has a different I2C base address (0x38-0x3F) from the PCF8574 (0x20-0x27), allowing up to 16 devices (128 I/Os) on a single bus. The 2.5µA static current makes it ideal for battery-powered designs. The T suffix denotes the SOIC-16 package.

Working Principle: PCF8574AT Working Principle

The PCF8574AT uses quasi-bidirectional I/O ports that simplify interface design by eliminating the need for a direction register. Each port pin has three components: a weak 100µA current source pulling to VDD, a strong pulldown transistor that activates when the output latch is 0, and a momentary strong pull-up that activates briefly when the output latch transitions from 0 to 1 (to accelerate rising edges). When used as an output, writing 0 turns on the strong pulldown (sinking up to 25mA), and writing 1 allows the weak pull-up to hold the pin HIGH. When used as an input, the port must first be written to 1 (default after power-on reset). An external device then pulls the pin LOW or lets it remain HIGH. Reading the port returns the actual pin state regardless of the output latch value. The interrupt output (INT) is an open-drain active-low signal that activates whenever any input pin state differs from the last-read value. This allows the host MCU to connect INT to an interrupt pin and only perform I2C reads when the I/O state has actually changed. Communication uses standard I2C: the master sends START + 7-bit slave address + R/W bit. For a write, the next byte is latched to the output port. For a read, the slave returns the current port pin states.

Pin Description: PCF8574AT Pin Definition and Functions
Pin Name Type Description
1 A0 Input I2C address bit 0
2 A1 Input I2C address bit 1
3 A2 Input I2C address bit 2
4 P0 I/O Quasi-bidirectional I/O port bit 0
5 P1 I/O Quasi-bidirectional I/O port bit 1
6 P2 I/O Quasi-bidirectional I/O port bit 2
7 P3 I/O Quasi-bidirectional I/O port bit 3
8 VSS Power Ground
9 P4 I/O Quasi-bidirectional I/O port bit 4
10 P5 I/O Quasi-bidirectional I/O port bit 5
11 P6 I/O Quasi-bidirectional I/O port bit 6
12 P7 I/O Quasi-bidirectional I/O port bit 7
13 INT Output Interrupt output (active-low, open-drain)
14 SCL Input I2C serial clock
15 SDA I/O I2C serial data (open-drain)
16 VDD Power Supply (2.5V to 6V)
Application Scenarios: In which products and applications is PCF8574AT used
  • LED Matrix: 8 pins sink 25mA each to drive 8 LEDs directly; add more PCF8574 for larger displays
  • Keypad Scan: 4 outputs + 4 inputs scan a 4×4 matrix; INT pin interrupts MCU on any key press
  • GPIO Expansion: Add 8 I/O to an MCU with only 2 pins (SDA, SCL); 16 devices per bus = 128 I/O from 2 MCU pins
  • Relay Driver: 25mA sink per pin directly drives 5V relay coils through ULN2803 darlington array
  • Low-Power Design: 2.5µA static current; INT eliminates polling, reducing MCU wake time in battery systems
Alternative Models: What chips are recommended as replacements for PCF8574AT
Model Manufacturer Key Difference Package Specs
PCF8574T NXP Same but different I2C base address (0x20), SOIC-16 – –
PCF8574AP TI TI’s equivalent, DIP-16 through-hole – –
PCA9557PW NXP Drop-in replacement, TSSOP-20, with config registers – –
MCP23008-E/SO Microchip 8-bit I2C expander, config registers, SOIC-18 – –
MAX7317ATG+T ADI/Maxim 10-bit I2C expander, PWM, TSSOP-24 – –

PCF8574AT is an 8-bit I2C I/O expander from NXP in SOIC-16 with address 0x38-0x3F. The PCF8574T provides address 0x20-0x27. The PCF8574AP uses DIP-16 with address 0x38-0x3F. The MCP23008-E/SO from Microchip provides 8-bit I2C I/O with configurable interrupt in SOIC-18. The MAX7311 from ADI/Maxim offers 16-bit I2C I/O. The PCA8574 from NXP provides a newer I/O expander with improved ESD. The TCA9554 from TI offers 8-bit I2C I/O with interrupt in VQFN-16.

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1