Opens in a new tab

PESD2CAN

Dual bidirectional ESD diode for CAN bus, 24V, 3.5pF, SOT-23

4143

Effective Inventory

Image for reference only

Manufacturer Part:

PESD2CAN

Package:

SOT-23 (2.9 x 1.3 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PESD2CAN from Nexperia is a dual bidirectional ESD protection diode for CAN bus lines. In SOT-23 package, it provides IEC 61000-4-2 ESD protection up to 15kV contact with ultra-low 3.5pF capacitance, ideal for CAN FD data lines.

Key Specifications

VRWM 24V
VBR Min 26V
Clamping Voltage (8A) 40V typical
Capacitance 3.5pF typical
ESD Protection 15kV contact / 25kV air
Leakage 1nA typical
Channels 2 (bidirectional)
Package SOT-23

Features

  • Designed for CAN and CAN FD bus protection
  • Ultra-low 3.5pF capacitance for signal integrity
  • Bidirectional ESD protection
  • 15kV contact discharge per IEC 61000-4-2

Applications

  • CAN bus ESD protection (Classical CAN and CAN FD)
  • Automotive CAN networks
  • Industrial CAN networks
  • 12V and 24V automotive systems
Product Introduction: PESD2CAN Product Introduction

The PESD2CAN from Nexperia is a dedicated ESD protection device for Controller Area Network (CAN) bus systems. This dual bidirectional TVS diode offers 24V reverse standoff with ultra-low 3.5pF capacitance per channel, ensuring minimal signal degradation on high-speed CAN FD bus lines up to 5Mbps. It meets IEC 61000-4-2 ESD protection levels of 15kV contact discharge, suitable for automotive and industrial CAN networks.

Working Principle: PESD2CAN Working Principle

The PESD2CAN operates as a bidirectional TVS device protecting CANH and CANL lines. (1) Normal: Below 24V standoff, presents 3.5pF capacitance and 1nA leakage, preserving signal integrity. (2) ESD Event: When transient exceeds 26V breakdown, device avalanches and clamps to 40V at 8A. (3) Bidirectional: Symmetrical structure protects both positive and negative transients on CANH and CANL. (4) Recovery: Automatically returns to high-impedance standby after transient subsides.

Pin Description: PESD2CAN Pin Definition and Functions
Pin Name Function
1 CANL CAN low bus line protection
2 GND Ground reference
3 CANH CAN high bus line protection
Application Scenarios: In which products and applications is PESD2CAN used
  • Automotive CAN bus: Protects CAN transceivers from ESD in 12V/24V vehicle networks
  • CAN FD networks: 3.5pF capacitance preserves signal integrity at 2Mbps/5Mbps
  • Industrial CAN: Shields bus lines from ESD and EFT transients per IEC 61000-4-2/4-4
Alternative Models: What chips are recommended as replacements for PESD2CAN
Manufacturer Part Number Package Notes
Nexperia PESD2CAN-U SOT-23 AEC-Q101 qualified
onsemi NUP2105LT1G SOT-23 CAN ESD, 24V
ST ESDCAN03-2BWY SOT-23 CAN ESD, 3pF
TI TPD1E10B06 SOT-23 Single channel ESD, 24V

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1