Opens in a new tab

PIC16F722A-I/SO

8-bit PIC MCU, 3.5KB Flash, 128B RAM, 20MHz/5MIPS, 11-ch 8-bit ADC, mTouch, USART/SPI/I2C, 28-SOIC, XLP nanoWatt

6780

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16F722A-I/SO

Package:

28-SOIC (7.50 mm width)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

PIC16F722A-I/SO — 8-Bit PIC Microcontroller with XLP Technology

1. Component Overview

The PIC16F722A-I/SO is a 28-pin, 8-bit Flash microcontroller manufactured by Microchip Technology. It belongs to Microchip’s eXtreme Low Power (XLP) PIC16F72X family, featuring nanoWatt technology for ultra-low power consumption. The device offers 3.5 KB (2,048 × 14 words) of Flash program memory, 128 bytes of SRAM, and a wide operating voltage range of 1.8V to 5.5V.

The PIC16F722A uses a mid-range PIC core with only 35 single-cycle instructions (except branches), achieving up to 20 MHz operation (5 MIPS). It integrates rich peripherals including an 11-channel 8-bit ADC, two CCP modules, SPI/I²C/AUSART communication interfaces, a precision internal 16 MHz oscillator, and a built-in mTouch™ capacitive sensing module. The “I” in the part number indicates industrial temperature range (–40°C to +85°C), and “/SO” denotes the 28-lead SOIC package.

2. Key Specifications

Parameter Value
Manufacturer Microchip Technology
Part Number PIC16F722A-I/SO
Component Type 8-Bit Flash Microcontroller
Core Architecture PIC Mid-Range (RISC)
Instruction Set 35 instructions (single-cycle except branches)
Maximum Clock Speed 20 MHz (5 MIPS)
Program Memory 3.5 KB Flash (2,048 × 14 words)
Program Memory Endurance 1,000 write cycles (typical), >40 years retention
RAM 128 bytes
Data EEPROM 0 bytes (not available)
Operating Voltage 1.8V to 5.5V
I/O Pins 25 (1 input-only pin)
ADC 11-channel, 8-bit resolution
Internal Oscillator 16 MHz / 500 kHz (factory calibrated ±1%)
Timers TMR0 (8-bit), TMR1 (16-bit), TMR2 (8-bit)
CCP Modules 2 (Capture/Compare/PWM, 10-bit PWM)
Communication 1× SPI, 1× I²C (Slave), 1× AUSART
Capacitive Sensing mTouch™ — up to 8 channels
Interrupt Sources 12
Hardware Stack 8 levels
Package 28-SOIC (7.50 mm width)
Mounting Type Surface Mount (SMT)
Operating Temperature –40°C to +85°C (Industrial)
Programming In-Circuit Serial Programming (ICSP™)
Special Features BOR, POR, PWRT, WDT, Sleep mode
XLP Sleep Current 20 nA (PIC16LF variant)
RoHS Compliant Yes

3. Pin Configuration & Package

Package: 28-Lead SOIC (7.50 mm width)

Pin Name Functions
1 MCLR/VPP/RE3 Master Clear / Programming Voltage / Input
2 RA0/AN0/SS/VCAP GPIO / ADC Ch0 / SPI Slave Select / Regulator Cap
3 RA1/AN1 GPIO / ADC Ch1
4 RA2/AN2 GPIO / ADC Ch2
5 RA3/AN3/VREF GPIO / ADC Ch3 / ADC Voltage Reference
6 RA4/T0CKI/CPS6 GPIO / Timer0 Clock / Cap Sense Ch6
7 RA5/AN4/SS/VCAP/CPS7 GPIO / ADC Ch4 / SPI SS / Reg Cap / Cap Sense Ch7
8 VSS Ground
9 RA7/OSC1/CLKIN GPIO / Oscillator Input / External Clock
10 RA6/OSC2/CLKOUT/VCAP GPIO / Oscillator Output / Clock Out / Reg Cap
11 RB0/AN12/CPS0/INT GPIO / ADC Ch12 / Cap Sense Ch0 / External Interrupt
12 RB1/AN10/CPS1 GPIO / ADC Ch10 / Cap Sense Ch1
13 RB2/AN8/CPS2 GPIO / ADC Ch8 / Cap Sense Ch2
14 RB3/AN9/CPS3/CCP2 GPIO / ADC Ch9 / Cap Sense Ch3 / CCP2
15 RB4/AN11/CPS4 GPIO / ADC Ch11 / Cap Sense Ch4
16 RB5/AN13/CPS5/T1G GPIO / ADC Ch13 / Cap Sense Ch5 / Timer1 Gate
17 RB6/ICSPCLK GPIO / ICSP Clock
18 RB7/ICSPDAT GPIO / ICSP Data
19 VDD Supply Voltage
20 VSS Ground
21 RC0/T1CKI/T1OSO GPIO / Timer1 Clock / Timer1 Osc Output
22 RC1/CCP2/T1OSI GPIO / CCP2 / Timer1 Osc Input
23 RC2/CCP1 GPIO / CCP1 (Capture/Compare/PWM)
24 RC3/SCK/SCL GPIO / SPI Clock / I²C Clock
25 RC4/SDI/SDA GPIO / SPI Data In / I²C Data
26 RC5/SDO GPIO / SPI Data Out
27 RC6/TX/CK GPIO / USART TX / USART Clock
28 RC7/RX/DT GPIO / USART RX / USART Data

4. Features & Functional Description

  • High-Performance RISC CPU: Only 35 instructions to learn, all single-cycle except branches. 8-level hardware stack with direct, indirect, and relative addressing modes. Processor read access to program memory enables table-look operations.
  • Precision Internal Oscillator: Factory-calibrated 16 MHz or 500 kHz internal oscillator (±1% typical). Software-selectable ÷1, ÷2, ÷4, or ÷8 divider provides flexible clock options without external crystal.
  • 11-Channel 8-Bit ADC: Supports conversion during Sleep mode. Selectable voltage reference (1.024V / 2.048V / 4.096V) allows optimized resolution for different input ranges. Ideal for sensor interfacing and analog measurements.
  • Dual CCP Modules: Each module supports 16-bit Capture (12.5 ns resolution), 16-bit Compare (200 ns resolution), and 10-bit PWM (up to 20 kHz). Suitable for motor control, signal generation, and precise timing.
  • mTouch™ Capacitive Sensing: Built-in capacitive sensing oscillator supports up to 8 channels, enabling touch-button and slider interfaces without external components.
  • Communication Interfaces: SPI (Master/Slave), I²C (Slave with Address Mask), and AUSART provide versatile connectivity for sensors, displays, and host communication.
  • Enhanced Timer1: Dedicated low-power 32 kHz oscillator for real-time clock (RTC) applications. External gate input with toggle and single-shot modes. 600 nA current consumption at 32 kHz (LF variant).
  • Low-Power Modes: Sleep mode with 20 nA current (LF variant), Watchdog Timer at 500 nA, enabling ultra-low power designs for battery-operated applications.
  • On-Chip 3.2V Regulator: PIC16F722A includes an integrated voltage regulator with VCAP filter capacitor pin, simplifying power supply design for 5V applications.

5. Typical Applications

  • Consumer Electronics: Remote controls, handheld devices, portable instruments, and smart home appliances.
  • Capacitive Touch Interfaces: Touch-sensitive panels, keypads, and sliders using the integrated mTouch module.
  • Industrial Sensor Nodes: Temperature, pressure, and humidity monitoring with ADC and USART/SPI connectivity.
  • Motor Control: Small DC and stepper motor control using dual CCP PWM outputs.
  • Battery-Powered IoT Devices: Ultra-low power consumption in Sleep mode enables years of battery life in wireless sensor nodes.
  • LED Lighting Control: PWM dimming and color mixing with CCP modules and ADC feedback.
  • Automotive Instrumentation: Recommended for automotive design; suitable for dashboard displays, sensor interfaces, and body electronics.
  • Medical Devices: Portable diagnostic equipment, patient monitoring, and low-power wearable health sensors.

6. Equivalent & Alternative Parts

Part Number Manufacturer Description Key Differences
PIC16F723A-I/SO Microchip Same family, larger memory 7 KB Flash, 192 bytes RAM; pin-compatible
PIC16LF722A-I/SO Microchip XLP low-voltage variant 1.8V–3.6V operation; lower sleep current
PIC16F722A-I/SP Microchip Same device, SPDIP package Through-hole SPDIP-28 package
PIC16F722A-I/SS Microchip Same device, SSOP package Smaller 28-SSOP package (5.30 mm width)
PIC16F1825 Microchip Newer 8-bit PIC, more features Enhanced mid-range core, more peripherals
ATmega328P Microchip (Atmel) 8-bit AVR microcontroller 32 KB Flash, 2 KB RAM, different architecture
STM32F030F4P6 STMicroelectronics 32-bit ARM Cortex-M0 MCU 32-bit core, 16 KB Flash, more processing power

7. Design Recommendations

  • Use the internal 16 MHz oscillator to eliminate the need for an external crystal, reducing component count and board space. Connect VCAP capacitor (typically 10 µF) between RA0/VCAP pin and VSS for the on-chip regulator stability.
  • For the PIC16F722A (non-LF variant), the on-chip 3.2V regulator can power external low-power peripherals. Use a 10 µF ceramic capacitor on the VCAP pin.
  • Place decoupling capacitors (0.1 µF ceramic) close to VDD/VSS pin pairs for noise immunity and stable operation.
  • Use ICSP programming header (ICSPCLK on RB6, ICSPDAT on RB7, MCLR on RE3) for development and production programming. A 6-pin ICSP header footprint is recommended on the PCB.
  • For capacitive sensing applications, follow Microchip’s mTouch design guidelines: keep sense pads away from noisy signals, use guarded traces, and calibrate for environmental variations.
  • When using the ADC, maintain a clean analog ground plane and keep analog signal traces short. Use the selectable voltage reference for optimized resolution in low-voltage sensor applications.
  • For reliable operation in noisy environments, enable Brown-out Reset (BOR) and configure the Watchdog Timer to recover from software hangs.
  • The PIC16F722A and PIC16F722A-I/SO are recommended for new designs over the older PIC16F722 (without “A”) at reduced cost with identical electrical characteristics.
Product Introduction: PIC16F722A-I/SO Product Introduction

The PIC16F722A-I/SO is a 28-pin 8-bit Flash microcontroller from Microchip Technology, part of the eXtreme Low Power (XLP) PIC16F72X family with nanoWatt technology. It features 3.5KB Flash, 128 bytes SRAM, a mid-range PIC core with 35 single-cycle instructions (5 MIPS at 20MHz), and an operating voltage range of 1.8V to 5.5V.

Rich peripherals include an 11-channel 8-bit ADC with selectable voltage reference, dual CCP modules with 10-bit PWM, mTouch capacitive sensing (up to 8 channels), SPI/I2C/AUSART communication, a factory-calibrated 16MHz internal oscillator, and an integrated 3.2V on-chip regulator. The device is available in a 28-lead SOIC package with industrial temperature range (-40C to +85C).

Working Principle: PIC16F722A-I/SO Working Principle

The PIC16F722A uses a mid-range RISC CPU core with 35 single-word single-cycle instructions (except branches). An 8-level hardware stack supports direct, indirect, and relative addressing. The processor executes up to 5 MIPS at 20MHz clock.

Clock System: A factory-calibrated 16MHz or 500kHz internal oscillator (+-1%) can be software-selected with div1/2/4/8 options, eliminating the need for an external crystal. External clock input is also supported via OSC1/OSC2 pins.

ADC Subsystem: An 11-channel 8-bit SAR ADC supports conversion during Sleep mode. A selectable voltage reference (1.024V/2.048V/4.096V) optimizes resolution for different sensor input ranges.

Communication: SPI (Master/Slave), I2C (Slave with Address Mask), and AUSART provide versatile connectivity. Dual CCP modules support 16-bit Capture, 16-bit Compare, and 10-bit PWM (up to 20kHz).

Low Power: Sleep mode draws 20nA (LF variant). Timer1 has a dedicated 32kHz low-power oscillator for RTC applications.

Pin Description: PIC16F722A-I/SO Pin Definition and Functions
Pin Name Functions
1 MCLR/VPP/RE3 Master Clear / Programming Voltage / Input
2 RA0/AN0/SS/VCAP GPIO / ADC Ch0 / SPI SS / Regulator Cap
3 RA1/AN1 GPIO / ADC Ch1
4 RA2/AN2 GPIO / ADC Ch2
5 RA3/AN3/VREF GPIO / ADC Ch3 / ADC Voltage Reference
6 RA4/T0CKI/CPS6 GPIO / Timer0 Clock / Cap Sense Ch6
7 RA5/AN4/SS/VCAP/CPS7 GPIO / ADC Ch4 / SPI SS / Reg Cap / Cap Sense
8 VSS Ground
9 RA7/OSC1/CLKIN GPIO / Oscillator Input / External Clock
10 RA6/OSC2/CLKOUT/VCAP GPIO / Osc Output / Clock Out / Reg Cap
11 RB0/AN12/CPS0/INT GPIO / ADC / Cap Sense / External Interrupt
12-18 RB1-RB7 GPIO with ADC, Cap Sense, CCP, ICSP functions
19 VDD Supply Voltage (1.8V to 5.5V)
20 VSS Ground
21-28 RC0-RC7 GPIO with Timer1, CCP, SPI, I2C, USART functions
Application Scenarios: In which products and applications is PIC16F722A-I/SO used
  • Capacitive Touch Interfaces: Built-in mTouch module supports up to 8 touch channels for buttons, sliders, and proximity sensing without external components.
  • Consumer Electronics: Remote controls, handheld devices, portable instruments with ultra-low power Sleep mode (20nA).
  • Industrial Sensor Nodes: 11-channel ADC with selectable reference for temperature, pressure, and humidity monitoring.
  • Motor Control: Dual CCP PWM outputs (10-bit, up to 20kHz) for small DC and stepper motor control.
  • Battery-Powered IoT: XLP nanoWatt technology enables years of battery life in wireless sensor nodes.
Alternative Models: What chips are recommended as replacements for PIC16F722A-I/SO
Model Manufacturer Key Difference Package Specs
PIC16F723A-I/SO Microchip Same family, larger memory 7KB Flash, 192B RAM; pin-compatible – –
PIC16LF722A-I/SO Microchip XLP low-voltage variant 1.8V-3.6V; lower sleep current – –
PIC16F1825 Microchip Newer enhanced mid-range PIC More peripherals, enhanced core – –
ATmega328P Microchip (Atmel) 8-bit AVR microcontroller 32KB Flash, 2KB RAM, different arch – –
STM32F030F4P6 STMicroelectronics 32-bit ARM Cortex-M0 MCU 32-bit core, 16KB Flash – –

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1