Opens in a new tab

PIC16F887T-I/PT

8-bit PIC MCU, 14KB Flash, 368B RAM, 14ch 10-bit ADC, EUSART, MSSP, TQFP-44

12464

Effective Inventory

Image for reference only

Manufacturer Part:

PIC16F887T-I/PT

Package:

TQFP-44 (10 x 10 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The PIC16F887T-I/PT is an 8-bit PIC microcontroller from Microchip Technology featuring 14KB Flash, 368B RAM, 256B EEPROM, 14-channel 10-bit ADC, EUSART, MSSP (SPI/I2C), and 35 I/O pins in a 44-pin TQFP package.

Key Specifications

Core PIC16 (8-bit)
Max Clock Speed 20 MHz
Program Memory 14KB Flash (8K x 14)
RAM 368 bytes
Data EEPROM 256 bytes
I/O Pins 35
ADC 10-bit, 14 channels
Timers 3 (TMR0, TMR1, TMR2)
CCP Modules 1 CCP + 1 ECCP (auto-shutdown, steering)
Communication EUSART, MSSP (SPI/I2C)
Comparators 2
Supply Voltage 2.0 V to 5.5 V
Operating Temperature -40°C to +85°C
Package TQFP-44 (10 x 10 mm)

Features

  • 35 I/O pins with interrupt-on-change
  • 14-channel 10-bit ADC with programmable voltage reference
  • EUSART with auto-baud detect and auto-wake-up
  • Enhanced CCP with auto-shutdown and PWM steering
  • MSSP supporting SPI and I2C with address mask
  • Two comparators with SR latch mode
  • Ultra Low-Power Wake-up (ULPWU)
  • Fail-safe clock monitoring
  • In-Circuit Serial Programming (ICSP) and Debug (ICD)

Applications

  • Appliance motor control
  • Automotive body electronics
  • Power monitoring and management
  • Industrial control and instrumentation
  • Consumer electronics
Product Introduction: PIC16F887T-I/PT Product Introduction

The PIC16F887T-I/PT is an 8-bit CMOS Flash microcontroller from Microchip Technology based on the powerful PIC architecture with only 35 single-word instructions. It features 14KB program memory, 368 bytes RAM, 256 bytes data EEPROM, 35 I/O pins, and a rich peripheral set including a 14-channel 10-bit ADC, EUSART with auto-baud detect, MSSP (SPI/I2C), two comparators, and CCP/ECCP modules with auto-shutdown and PWM steering. The device operates from 2.0V to 5.5V, supports In-Circuit Serial Programming and Debug, and includes Ultra Low-Power Wake-up and fail-safe clock monitoring features.

Working Principle: PIC16F887T-I/PT Working Principle

The PIC16F887 uses Microchip’s modified Harvard architecture with separate program and data memory buses. The 14-bit wide instruction set enables single-word, single-cycle execution for most instructions (except branches which take two cycles). The program counter addresses 14KB of Flash memory organized as 8K x 14-bit words. The ALU performs 8-bit arithmetic and logical operations with a working register (W) accumulator. The MSSP module implements full SPI master/slave and I2C master/slave/multi-master protocols. The EUSART supports asynchronous serial communication with auto-baud detection and address detection for multi-drop networks. The ECCP module provides enhanced PWM with auto-shutdown (immediate output disable on fault) and steering (redirecting PWM output to different pins). The ADC uses a successive approximation architecture with sample-and-hold.

Pin Description: PIC16F887T-I/PT Pin Definition and Functions
Pin Group Function Description
RA0-RA7 GPIO/ADC Port A with AN0-AN7, Vref, comparator inputs
RB0-RB7 GPIO/Interrupt Port B with interrupt-on-change, ICSP/ICD
RC0-RC7 GPIO/Communication Port C with EUSART, MSSP, CCP, PWM
RD0-RD7 GPIO/ECCP Port D with ECCP PWM steering, parallel slave port
RE0-RE3 GPIO/ADC Port E with AN8-AN12, Vref, MCLR
VDD/VSS Power Supply and ground (multiple pins)
Application Scenarios: In which products and applications is PIC16F887T-I/PT used
  • Appliance Motor Control: ECCP with PWM steering drives multi-phase BLDC motors; auto-shutdown protects on fault
  • Automotive Body: Wide 2.0-5.5V operation, fail-safe clock monitor, and brown-out reset for reliable automotive electronics
  • Power Monitoring: 14-channel 10-bit ADC monitors multiple voltage and current rails simultaneously
  • Industrial Control: MSSP (SPI/I2C) connects to sensors; EUSART links to host controllers via RS-232/485
  • Consumer Electronics: 35 I/O pins, compact TQFP-44 package, and low cost for high-volume consumer products
Alternative Models: What chips are recommended as replacements for PIC16F887T-I/PT
Model Manufacturer Key Difference Package Specs
PIC16F887-I/P Microchip 40-pin PDIP through-hole package – –
PIC16F886T-I/SS Microchip 28-pin SSOP, fewer I/O – –
PIC18F45K22-I/PT Microchip PIC18, 32KB Flash, 44-TQFP – –
ATmega328P-AU Microchip (Atmel) 32KB Flash, 32-TQFP, Arduino-compatible – –
PIC16F1947-I/PT Microchip 14KB Flash, LCD driver, 44-TQFP – –

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1