Opens in a new tab

PIC18F452-I/PT

8-bit PIC18 MCU, 40MHz, 32KB Flash, 1.5KB RAM, 10-bit ADC, CAN, TQFP-44

3367

Effective Inventory

Image for reference only

Manufacturer Part:

PIC18F452-I/PT

Package:

TQFP-44 (10.00 x 10.00 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PIC18F452-I/PT from Microchip Technology is a high-performance 8-bit PIC18 microcontroller with 32 KB Flash and 1536 bytes RAM in a 44-pin TQFP package. Running at up to 40 MHz, it features 10-bit ADC, multiple serial interfaces, and enhanced Flash endurance for embedded control applications.

Key Specifications

Core PIC18 @ 40 MHz
Program Memory 32 KB Flash
RAM 1536 bytes
ADC 8 channels, 10-bit
Timers 4 (including 2 x 16-bit enhanced)
Communication MSSP (SPI/I2C), USART, CAN 2.0B
I/O Pins 34
Operating Voltage 4.2 V to 5.5 V
Operating Temperature -40°C to +85°C
Package TQFP-44

Features

  • PIC18 core with 16-bit wide instructions for efficient code execution
  • 32 KB Flash with 100,000 write/erase cycle endurance
  • 10-bit ADC with 8 input channels and 100 ksps conversion rate
  • Enhanced CAN 2.0B interface with 3 transmit and 2 receive buffers
  • MSSP module supporting SPI and I2C master/slave modes
  • Self-programming capability via bootloader

Applications

  • Industrial automation and process control
  • Automotive body electronics with CAN bus
  • Medical device instrumentation
  • Consumer appliance motor control
  • Point-of-sale terminals and security systems
Product Introduction: PIC18F452-I/PT Product Introduction

The PIC18F452-I/PT is a high-performance 8-bit microcontroller from Microchip Technology based on the PIC18 architecture with 16-bit wide instructions for improved code efficiency. The device integrates 32 KB of self-programmable Flash memory with 100,000 write/erase cycle endurance, 1536 bytes of SRAM, and 256 bytes of EEPROM data memory. Running at up to 40 MHz with an 8 MHz internal oscillator and PLL option, it delivers up to 10 MIPS performance. The peripheral set includes an 8-channel 10-bit ADC at 100 ksps, an Enhanced CAN 2.0B module with 3 transmit and 2 receive buffers, an MSSP supporting both SPI and I2C, a full-duplex USART, and four timers including two 16-bit enhanced timers with PWM output. Housed in a 44-pin TQFP package rated for the industrial temperature range of -40°C to +85°C.

Working Principle: PIC18F452-I/PT Working Principle

The PIC18F452 uses Microchip’s PIC18 core architecture featuring a 16-bit instruction word and 8-bit data path. The CPU fetches 16-bit instructions from Flash via a 21-bit program counter, enabling direct addressing of the entire 2 MB program space. Instructions execute in a single cycle (100 ns at 40 MHz), with program branches taking two cycles. The hardware multiplier performs 8×8 unsigned multiply in a single cycle. The 10-bit successive approximation ADC converts analog inputs through a sample-and-hold circuit and channel multiplexer. The CAN module implements the full CAN 2.0B protocol with hardware message filtering, reducing CPU overhead for bus communication. Self-programming allows Flash updates via a bootloader without external programming hardware.

Pin Description: PIC18F452-I/PT Pin Definition and Functions
Pin Group Count Function
VDD/VSS 6 Power supply and ground pairs for analog and digital domains
MCLR 1 Master clear (reset) input with internal pull-up
OSC1/OSC2 2 Main oscillator input and output
PORTA (RA0-RA7) 8 ADC inputs, comparator, timer clock, external interrupt
PORTB (RB0-RB7) 8 Interrupt-on-change, ICSP programming pins, CAN TX/RX
PORTC (RC0-RC7) 8 Timer I/O, SPI/I2C (MSSP), USART TX/RX, PWM output
PORTD (RD0-RD7) 8 Parallel slave port, general I/O
PORTE (RE0-RE2) 3 ADC inputs, parallel slave port control
Application Scenarios: In which products and applications is PIC18F452-I/PT used
  • Industrial CAN Bus Control: Multi-node CAN communication for factory automation sensors and actuators
  • Medical Instruments: Portable diagnostic devices with ADC-based measurement and USB data logging
  • Automotive Body Electronics: Door module, seat controller, and lighting control with CAN connectivity
  • Motor Control: Brushed DC motor speed control using enhanced PWM and ADC feedback
  • Security and Access: Smart card readers, keypad entry systems, and alarm controllers
Alternative Models: What chips are recommended as replacements for PIC18F452-I/PT
Model Manufacturer Flash RAM Speed Package Notes
PIC18F4520-I/PT Microchip 32 KB 1.5 KB 40 MHz TQFP-44 Enhanced ADC, nanoWatt
PIC18F4550-I/PT Microchip 32 KB 2 KB 48 MHz TQFP-44 USB 2.0 added
PIC18F46K22-I/PT Microchip 64 KB 3.8 KB 64 MHz TQFP-44 More Flash/RAM, faster
ATmega32A-AU Microchip 32 KB 2 KB 16 MHz TQFP-44 AVR alternative
STM32F103C8T6 STMicroelectronics 64 KB 20 KB 72 MHz LQFP-48 32-bit ARM Cortex-M3

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1