Product Overview
The PM4351-RGI from Microchip Technology is a Line Interface Unit (LIU) for E1/T1 telecommunications applications, supporting data rates up to 8.192Mbps. It features short-haul and long-haul operation, integrated clock and data recovery (CDR), and parallel or serial interface. Operating from a 3.3V supply, it is housed in an 80-pin MQFP (14x14mm) package.
Key Specifications
| Category | Telecom Line Interface Unit |
| Standards | E1 / T1 |
| Max Data Rate | 8.192 Mbps |
| Channels per Chip | 1 |
| Haul Type | Short / Long Haul |
| Interface Type | Parallel / Serial |
| Integrated CDR | Yes |
| Internal Matching Impedance | Yes |
| Supply Voltage | 3.135V ~ 3.465V (3.3V typical) |
| Operating Temperature | -40°C ~ 85°C |
| Package | 80-MQFP (14x14mm) |
| Part Status | Obsolete |
Features
- Single-channel E1/T1 line interface unit
- Short-haul and long-haul operation support
- Integrated clock and data recovery (CDR)
- Internal impedance matching
- Parallel and serial microprocessor interface
- 3.3V single supply operation
- Standard E1 (2.048Mbps) and T1 (1.544Mbps) framing
- Diagnostic and performance monitoring features
- E1/T1 telecommunications equipment
- Digital cross-connect systems
- Channel banks and multiplexers
- Router and switch line cards
- Legacy telecom infrastructure
- Telco Line Cards: E1/T1 interface on router and switch line cards
- Digital Cross-Connect: Channelized E1/T1 switching in DACS systems
- Channel Banks: T1-to-analog conversion in PBX interfaces
- Multiplexers: E1/T1 aggregation in telecom transmission equipment
- Legacy Infrastructure: Maintenance and replacement of existing E1/T1 systems
Applications
Product Introduction: PM4351-RGI Product Introduction
The PM4351-RGI from Microchip Technology is a single-channel E1/T1 Line Interface Unit (LIU) designed for telecommunications equipment. It supports both short-haul and long-haul operation with integrated clock and data recovery (CDR), eliminating the need for external clock recovery components. The device features internal impedance matching for both E1 (75Ω coaxial / 120Ω twisted pair) and T1 (100Ω twisted pair) line interfaces. The PM4351 provides both parallel and serial microprocessor interface options for flexible system integration. Built on 0.35μm process technology, it operates from a single 3.3V supply and supports data rates up to 8.192Mbps, covering E1 (2.048Mbps), T1 (1.544Mbps), and higher-rate clear-channel applications.
Working Principle: PM4351-RGI Working Principle
The PM4351-RGI interfaces between the digital system backplane and the E1/T1 transmission line. On the receive side, the line receiver amplifier accepts the incoming signal from the line transformer, applies internal impedance matching, and passes it to the CDR circuit which extracts the clock and retimes the data. The framer processes the recovered data according to E1 or T1 framing standards, performing bit and frame alignment, CRC checking, and performance monitoring. On the transmit side, the framer generates the proper framing pattern, and the line driver amplifies the signal to the appropriate level for the line interface. The device supports both short-haul (CSU/DSU) and long-haul (span) configurations with programmable line build-out settings.
Pin Description: PM4351-RGI Pin Definition and Functions
| Pin Group | Count | Description |
|---|---|---|
| Line Interface | 8 | TTIP, TRING, RTIP, RRING (E1/T1 line pairs) |
| Parallel Data Bus | 16 | D0-D15 bidirectional data bus |
| Address/Control | 8 | A0-A5, RD, WR, CS |
| Serial Interface | 4 | SDI, SDO, SCLK, SCS (SPI-like) |
| System Interface | 8 | RCLK, TCLK, RFS, TFS, RDATA, TDATA, etc. |
| Power/Ground | 12 | VDD (3.3V) and GND |
| Control/Misc | 24 | Interrupt, reset, mode select, test pins |
Application Scenarios: In which products and applications is PM4351-RGI used
Alternative Models: What chips are recommended as replacements for PM4351-RGI
| Model | Manufacturer | Key Difference |
|---|---|---|
| PM4352-RGI | Microchip | Dual-channel version |
| PM4354-RGI | Microchip | Quad-channel LIU |
| DS26528 | Maxim/Analog | 8-channel LIU, more integrated |
| XRT82L33 | MaxLinear | Single E1/T1 LIU, 3.3V |
| LXT384 | Intel/Microchip | Quad T1/E1 LIU, older generation |
Recommend Parts

RK73H1ETTP20R0F
20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200
Brand: KOA Speer
Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm
IN STOCK: 33180pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS77001DBVR
50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5
Brand: TI
Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)
IN STOCK: 5000pcs
Cargo cycle: 3-7 Days
The minimum order is 1

TPS61021ADSGR
3A synchronous boost converter, 1.8-5.5V, VSSOP-8
Brand: TI
Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)
IN STOCK: 12398pcs
Cargo cycle: 3-7 Days
The minimum order is 1

S1MB-13-F
1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C
Brand: Diodes Inc
Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)
IN STOCK: 3679pcs
Cargo cycle: 3-7 Days
The minimum order is 1

ADUM5000ARWZ-RL
500mW isolated DC-DC converter, 3.3/5V, SOIC-16W
Brand: ADI
Package: SOIC-16W (10.3 x 7.5 mm, RW package)
IN STOCK: 6373pcs
Cargo cycle: 3-7 Days
The minimum order is 1

IN STOCK: 9357pcs
Cargo cycle: 3-7 Days
The minimum order is 1






