Opens in a new tab

PMV250EPEAR

P-ch MOSFET, -40V, -1.5A, 240mOhm, AEC-Q101, SOT-23-3

11250

Effective Inventory

Image for reference only

Manufacturer Part:

PMV250EPEAR

Package:

SOT-23-3 / TO-236AB (2.9 x 1.3 x 1.0 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PMV250EPEAR is a P-channel enhancement mode trench MOSFET from Nexperia rated at -40V VDSS, -1.5A ID, and 240 mOhm RDS(ON) max in a compact SOT-23-3 surface-mount package. AEC-Q101 qualified for automotive applications.

Key Specifications

Channel Type P-Channel Enhancement
Drain-Source Voltage (VDSS) -40 V
Continuous Drain Current (ID) -1.5 A (at TA=25°C)
RDS(ON) max 240 mOhm @ VGS=-10V
Gate Threshold Voltage -1.0 V to -2.5 V
Total Gate Charge (Qg) 4.7 nC typical
Input Capacitance (Ciss) 450 pF typical
Power Dissipation 480 mW (at TA=25°C), 6.25 W (at TC=25°C)
ESD Protection > 1 kV HBM
Operating Temperature -55°C to +150°C (Tj)
Package SOT-23-3 (TO-236AB)

Features

  • P-channel trench MOSFET technology
  • Logic-level gate drive compatible
  • Very fast switching speed
  • AEC-Q101 qualified for automotive
  • > 1 kV ESD protection
  • Compact SOT-23 footprint

Applications

  • High-side load switches
  • Relay drivers
  • High-speed line drivers
  • Battery-powered systems
  • Automotive electronics
Product Introduction: PMV250EPEAR Product Introduction

The PMV250EPEAR is a P-channel enhancement mode trench MOSFET from Nexperia rated at -40V drain-source voltage and -1.5A continuous drain current in a compact SOT-23-3 surface-mount package. Using trench MOSFET technology, it achieves 240 mOhm maximum RDS(ON) at VGS=-10V with a low gate charge of 4.7 nC for efficient switching. The device features logic-level gate drive compatibility (threshold -1.0V to -2.5V), very fast switching, and over 1 kV ESD protection. AEC-Q101 qualification makes it suitable for automotive applications. The compact SOT-23-3 package is ideal for space-constrained designs requiring high-side load switching.

Working Principle: PMV250EPEAR Working Principle

The PMV250EPEAR uses Nexperia trench MOSFET technology where vertical trenches are etched into the silicon and lined with gate oxide and polysilicon. When VGS is pulled below the source (more negative than the threshold), an inversion layer forms on the trench sidewalls, connecting the P+ source to the P-epi drain region and allowing current flow from source to drain. The trench structure provides higher cell density and lower RDS(ON) per die area compared to planar MOSFETs. As a P-channel device, it simplifies high-side switch design because no charge pump or bootstrap is needed. The low gate charge (4.7 nC) minimizes switching energy and allows direct drive from 3.3V or 5V logic. The integrated ESD protection diode on the gate protects against handling damage.

Pin Description: PMV250EPEAR Pin Definition and Functions
Pin Name Type Description
1 Gate Input Gate control terminal
2 Source Power Source terminal (connects to supply in high-side config)
3 Drain Power Drain terminal (connects to load)
Application Scenarios: In which products and applications is PMV250EPEAR used
  • High-Side Load Switch: P-channel eliminates charge pump; logic-level gate drive from MCU GPIO for battery power routing
  • Automotive Electronics: AEC-Q101 qualification ensures reliability in vehicle body controllers and lighting modules
  • Relay Drivers: 1.5A current capability drives small relays and solenoids from logic-level control signals
  • Battery-Powered Systems: 240 mOhm RDS(ON) and 4.7 nC Qg minimize power loss in battery switch circuits
  • Space-Constrained Designs: SOT-23-3 footprint occupies minimal PCB area in portable and wearable electronics
Alternative Models: What chips are recommended as replacements for PMV250EPEAR
Model Manufacturer Key Difference Package Specs
PMV50EPEAR Nexperia -30V, -4.2A, 45 mOhm, higher current – –
SI2301DS-T1-GE3 Vishay -20V, -2.2A, 100 mOhm, SOT-23 – –
BSS84LT1G onsemi -50V, -0.13A, 10 Ohm, SOT-23 – –
DMP2035U-7 Diodes Inc -20V, -2.8A, 70 mOhm, SOT-23 – –
IRLML6402TRPBF Infineon -20V, -3.7A, 65 mOhm, SOT-23 – –

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1