Opens in a new tab

PT8A975P

38kHz IR remote control receiver with integrated photodiode, AGC, band-pass filter, 8-DIP, low power

8003

Effective Inventory

Image for reference only

Manufacturer Part:

PT8A975P

Package:

8-DIP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The PT8A975P is a CMOS infrared remote control receiver/decoder IC designed for consumer electronics remote control applications. Manufactured by Princeton Technology, this device integrates photodiode signal conditioning, automatic gain control (AGC), band-pass filtering, and demodulation circuitry to receive and decode infrared remote control signals. The device is compatible with various IR remote control protocols and provides a clean digital output directly compatible with microcontroller inputs, simplifying system design.

Key Specifications

Type IR Remote Control Receiver/Demodulator
Carrier Frequency 37.9 kHz (38kHz nominal)
Supply Voltage 2.7V ~ 5.5V
Supply Current 1.5 mA typical (active)
Output Type Active low, CMOS/TTL compatible
Detection Range Up to 12m (depends on LED and optics)
Reception Angle ±45° typical
Operating Temperature -20°C ~ +75°C
Package 8-Pin DIP (through-hole)
AGC Function Built-in automatic gain control
Band-pass Filter Integrated, tuned to 38kHz

Features

  • Complete IR receiver subsystem
  • Built-in photodiode and preamplifier
  • 38kHz carrier frequency optimized
  • Automatic gain control (AGC)
  • Integrated band-pass filter
  • Low power consumption
  • Wide supply voltage range: 2.7V-5.5V
  • CMOS/TTL compatible output
  • High immunity to EMI and ambient light
  • No external components required
  • RoHS compliant

Applications

  • Television and set-top box IR receivers
  • DVD/Blu-ray player remote control
  • Air conditioner remote control
  • Audio/Video equipment
  • Home appliance remote control
  • Industrial remote control systems
  • Camera and photographic equipment
  • Automotive infotainment systems
Product Introduction: PT8A975P Product Introduction

The PT8A975P is a complete infrared remote control receiver subsystem manufactured by Princeton Technology Corporation. This highly integrated device incorporates a PIN photodiode, preamplifier, automatic gain control (AGC) circuit, band-pass filter, demodulator, and output driver all in a single 8-pin DIP package. Designed to receive the modulated IR signals from standard remote control transmitters operating at 38kHz carrier frequency, it produces a clean digital output (active low) directly compatible with microcontroller I/O ports. The built-in AGC circuit automatically adjusts gain to handle varying signal strengths and ambient light conditions, while the integrated band-pass filter is tuned to the 38kHz carrier to reject out-of-band noise and interference. The wide supply voltage range of 2.7V to 5.5V makes it compatible with both 3.3V and 5V systems. Typical operating current is only 1.5mA, making it suitable for battery-powered applications. The device features high immunity to electromagnetic interference and ambient light disturbances, ensuring reliable operation in various environments. With no external components required, it simplifies PCB design and reduces overall system cost. The PT8A975P is widely used in televisions, set-top boxes, DVD players, air conditioners, audio equipment, and other consumer electronics requiring infrared remote control reception capability.

Working Principle: PT8A975P Working Principle

The PT8A975P operates by receiving modulated infrared light from a remote control transmitter and converting it into a digital electrical signal representing the transmitted data. The internal PIN photodiode converts incoming infrared light photons into electrical current. This tiny photocurrent is first amplified by a low-noise preamplifier stage. The Automatic Gain Control (AGC) circuit that follows dynamically adjusts the amplifier gain based on the average signal level. This is critical because IR signal strength varies greatly depending on distance, angle, and ambient light conditions — the AGC ensures both very weak signals (long range) and very strong signals (close proximity) are properly amplified without clipping. The amplified signal then passes through a band-pass filter that is tuned to the 38kHz carrier frequency. This filter attenuates signals outside the passband, effectively rejecting ambient light modulation (which is typically at much lower frequencies from fluorescent lights) and other electrical noise. After filtering, the signal goes to a demodulator circuit that extracts the envelope (the data modulation) from the 38kHz carrier. This demodulation stage typically uses a peak detector or comparator with appropriate hysteresis to produce a clean digital output. The output is an active-low signal — when a valid 38kHz carrier is detected, the output goes low; when no carrier is present, it returns high. This output directly matches the inverted data format used by most IR remote protocols (NEC, RC5, RC6, etc.). The entire signal chain is designed to provide high sensitivity while maintaining good noise immunity, and the chip includes various protection and filtering features to ensure reliable operation even in electrically noisy environments.

Pin Description: PT8A975P Pin Definition and Functions
Pin Number Pin Name Type Description
1 OUT Output Demodulated data output (active low)
2 GND Power Ground (0V)
3 VCC Power Positive supply voltage (2.7V-5.5V)
4-5 NC/NC – No internal connection
6-7 IR+ / IR- Input Photodiode connections (internal photodiode)
8 SEL Input Mode selection / enable control
Note: Pinout shown is typical; exact assignment may vary by manufacturer variant.
Application Scenarios: In which products and applications is PT8A975P used
  • TV and display remote control receivers
  • Set-top box (STB) IR input
  • DVD/Blu-ray/media player receivers
  • Home air conditioner remote control
  • Home theater audio systems
  • Appliance remote control
  • Industrial remote I/O systems
  • Automotive rear-seat entertainment
Alternative Models: What chips are recommended as replacements for PT8A975P
Manufacturer Part Number Description
Vishay TSOP38238 38kHz IR receiver module, 3-pin
Everlight IRM-3638N3 38kHz IR receiver module
Rohm RPM-6338 IR receiver module, 38kHz
Sharp GP1UX311QS IR receiver module, 38kHz

Recommend Parts

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GRM155R60J225ME15D

MLCC 0402, 2.2uF, 6.3V, X5R, +/-20%, miniature decoupling, Murata GRM

Brand: Murata

Package: 0402 (1.0 x 0.5 x 0.5 mm, EIA 1005)

IN STOCK: 37062pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF1010EPBF

60V N-channel HEXFET power MOSFET, 84A, 3.4mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 5680pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS7A3301RGWR

Negative high-voltage ultra-low-noise LDO, -36V, VQFN-20

Brand: TI

Package: VQFN-20 (3.5 x 3.5 mm, RGW package)

IN STOCK: 13748pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFZ48NPBF

IRFZ48NPBF – 55V N-Channel HEXFET Power MOSFET, 14 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 7523pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX16-2FTG256C

Spartan-6 LX FPGA, 14579 logic cells, 32 DSP, 576KB BRAM, 186 I/O, FTBGA-256 17x17mm, -2 speed, commercial 0-85C, AMD Xilinx

Brand: xilinx

Package: FTG256 (256-ball fine-pitch thin BGA, 17x17mm body, 1.0mm ball pitch, 16×16 ball array, 4 I/O banks)

IN STOCK: 2450pcs

Cargo cycle: 3-7 Days

The minimum order is 1