Opens in a new tab

RCLAMP3304N.TCT

3.3V TVS array, 4-ch, 18V clamp, 3.8pF, 450W, SLP2626P10

14584

Effective Inventory

Image for reference only

Manufacturer Part:

RCLAMP3304N.TCT

Package:

SLP2626P10 (2.6 x 2.6 x 0.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The RCLAMP3304N.TCT from Semtech is a RailClamp low-capacitance TVS array in a SLP2626P10 (2.6×2.6mm) package. Designed for high-speed data line ESD protection, it protects up to 4 I/O lines with 3.3V operating voltage and 18V clamping voltage.

Key Specifications

Type Low-capacitance TVS array (RailClamp)
Operating Voltage 3.3V
Clamping Voltage 18V max @ Ipp
Peak Pulse Power 450W (8/20us)
Capacitance 3.8pF @ 1MHz
Channels 4 bidirectional + power
Package SLP2626P10 (2.6 x 2.6mm)
Operating Temperature -55°C to +125°C

Features

  • IEC 61000-4-2: 15kV air, 8kV contact ESD
  • IEC 61000-4-5: 25A (8/20us) lightning
  • Low 3.8pF line capacitance for high-speed signals
  • Protects up to 4 I/O lines and power line
  • Low 0.5uA leakage current
  • Compact 2.6 x 2.6mm DFN package

Applications

  • Gigabit Ethernet port ESD protection
  • USB 2.0 data line transient suppression
  • HDMI and DisplayPort ESD clamping
  • T1/E1 and T3/E3 secondary protection
  • Digital video interface protection
Product Introduction: RCLAMP3304N.TCT Product Introduction

The RCLAMP3304N.TCT from Semtech is a RailClamp low-capacitance TVS array designed to protect high-speed data interfaces from ESD, cable discharge events (CDE), and lightning surges. In a compact 10-pin SLP2626P10 (2.6×2.6mm) package, it protects up to 4 I/O lines plus the power line with a 3.3V operating voltage. The internal steering diodes direct transient currents to ground while the TVS diode clamps the voltage to 18V maximum. With only 3.8pF line capacitance, it does not degrade signal integrity on Gigabit Ethernet, USB 2.0, and other high-speed interfaces. IEC 61000-4-2 (8kV contact), IEC 61000-4-4 (40A EFT), and IEC 61000-4-5 (25A lightning) compliance ensures robust transient protection.

Working Principle: RCLAMP3304N.TCT Working Principle

The RCLAMP3304N.TCT uses a rail-clamp architecture with steering diodes and an internal TVS diode. During normal operation, the steering diodes are reverse-biased and present only 3.8pF capacitance to the signal lines. When a positive transient exceeds VCC + one diode drop, the upper steering diode conducts, routing current to the internal TVS diode, which clamps the voltage. For negative transients, the lower steering diode conducts to ground. The TVS diode provides the actual voltage clamping, limiting the voltage seen by the protected IC to 18V maximum. The rail-clamp topology provides lower clamping voltage than simple TVS diodes because the steering diodes add only one diode drop to the TVS clamp voltage.

Pin Description: RCLAMP3304N.TCT Pin Definition and Functions
Pin Name Type Function
1 I/O1 I/O Protected line 1
2 I/O2 I/O Protected line 2
3 GND Power Ground
4 I/O3 I/O Protected line 3
5 I/O4 I/O Protected line 4
6 VCC Power Power rail connection
7-10 NC/GND – No connect / additional ground
Application Scenarios: In which products and applications is RCLAMP3304N.TCT used
  • Gigabit Ethernet RJ-45 port ESD and surge protection
  • USB 2.0 high-speed data line TVS protection
  • HDMI and DisplayPort interface ESD clamping
  • T1/E1 telecom line secondary protection
  • Digital video signal line transient suppression
Alternative Models: What chips are recommended as replacements for RCLAMP3304N.TCT
Manufacturer Part Number Package Notes
Semtech RCLAMP3304P.TCT SLP1616P6 Smaller package, 80W, 4-ch
onsemi NUP4202MRT1G UDFN-10 3.3V, 4-ch TVS array
TI TPD4E05U06DQAR USON-10 5.5V, 4-ch, 0.5pF, ultra-low cap
Littelfuse SP3054-04UTG DFN-10 3.3V, 4-ch, 5pF TVS array

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1